And we're back to PC-98 Touhou for a brief interruption of the ongoing Shuusou Gyoku Linux port.
Let's clear some of the Touhou-related progress from the backlog, and use
the unconstrained nature of these contributions to prepare the
📝 upcoming non-ASCII translations commissioned by Touhou Patch Center.
The current budget won't cover all of my ambitions, but it would at least be
nice if all text in these games was feasibly translatable by the time I
officially start working on that project.
At a little over 3 pushes, it might be surprising to see that this took
longer than the
📝 TH03/TH04/TH05 cutscene system. It's
obvious that TH02 started out with a different system for in-game dialog,
but while TH04 and TH05 look identical on the surface, they only
actually share 30% of their dialog code. So this felt more like decompiling
2.4 distinct systems, as opposed to one identical base with tons of
game-specific differences on top.
The table of contents was pretty popular last time around, so let's have
another one:
Let's start with the ones from TH04 and TH05, since they are not that
broken. For TH04, ZUN started out by copy-pasting the cutscene system,
causing the result to inherit many of the caveats I already described in the
cutscene blog post:
It's still a plaintext format geared exclusively toward full-width
Japanese text.
The parser still ignores all whitespace, forcing ASCII text into hacks
with unassigned Shift-JIS lead bytes outside the second byte of a 2-byte
chunk.
Commands are still preceded by a 0x5C byte, which renders
as either a \ or a ¥ depending on your font and
interpretation of Shift-JIS.
Command parameters are parsed in exactly the same way, with all the same
limits.
A lot of the same script commands are identical, including 7 of them
that were not used in TH04's original dialog scripts.
Then, however, he greatly simplified the system. Mainly, this was done by
moving text rendering from the PC-98 graphics chip to the text chip, which
avoids the need for any text-related unblitting code, but ZUN also added a
bunch of smaller changes:
The player must advance through every dialog box by releasing any held
keys and then pressing any key mapped to a game action. There are no
timeouts.
The delay for every 2 bytes of text was doubled to 2 frames, and can't
be overridden.
Instead of holding ESC to fast-forward, pressing any key
will immediately print the entire rest of a text box.
Dialogs run in their own single-buffered frame loop, interrupting the
rest of the game. The other VRAM page keeps the background pixels required
for unblitting the face images.
All script commands that affect the graphics layer are preceded by a
1-frame delay. ZUN most likely did this because of the single-buffered
nature, as it prevents tearing on the first frame by waiting for the CRT
beam to return to the top-left corner before changing any pixels.
Both boxes are intended to contain up to 30 half-width characters on
each of their up to 3 lines, but nothing in the code enforces these limits.
There is no support for automatic line breaks or starting new boxes.
TH05 then moved from TH04's plaintext scripts to the binary
.TX2 format while removing all the unused commands copy-pasted
from the cutscene system. Except for a
single additional command intended to clear a text box, TH05's dialog
system only supports a strict subset of the features of TH04's system.
This change also introduced the following differences compared to TH04:
The game now stores the dialog of all 4 playable characters in the same
file, with a (4 + 1)-word header that indicates the byte offset
and length of each character's script. This way, it can load only the one
script for the currently played character.
Since there is no need for whitespace in a binary format, you can now
use ASCII 0x20 spaces even as the first byte of a 2-byte text
chunk! 🥳
All command parameters are now mandatory.
Filenames are now passed directly by pointer to the respective game
function. Therefore, they now need to be null-terminated, but can in turn be
as long as
📝 the number of remaining bytes in the allocated dialog segment.
In practice though, the game still runs on DOS and shares its restriction of
8.3 filenames…
When starting a new dialog box, any existing text in the other box is
now colored blue.
Thanks to ZUN messing up the return values of the command-interpreting
switch function, you can effectively use only line break and gaiji commands in the middle of text. All other
commands do execute, but the interpreter then also treats their command byte
as a Shift-JIS lead byte and places it in text RAM together with whatever
other byte follows in the script.
This is why TH04 can and does put its \= commandsinto the boxes
started with the 0 or 1 commands, but TH05 has to
put its 0x02 commands before the equivalent 0x0D.
For modding these files, you probably want to use TXDEF from
-Tom-'s MysticTK. It decodes these
files into a text representation, and its encoder then takes care of the
character-specific byte offsets in the 10-byte header. This text
representation simplifies the format a lot by avoiding all corner cases and
landmines you'd experience during hex-editing – most notably by interpreting
the box-starting 0x0D as a
command to show text that takes a string parameter, avoiding the broken
calls to script commands in the middle of text. However, you'd still have to
manually ensure an even number of bytes on every line of text.
In the entry function of TH05's dialog loop, we also encounter the hack that
is responsible for properly handling
📝 ZUN's hidden Extra Stage replay. Since the
dialog loop doesn't access the replay inputs but still requires key presses
to advance through the boxes, ZUN chose to just skip the dialog altogether in the
specific case of the Extra Stage replay being active, and replicated all
sprite management commands from the dialog script by just hardcoding
them.
And you know what? Not only do I not mind this hack, but I would have
preferred it over the actual dialog system! The aforementioned sprite
management commands effectively boil down to manual memory management,
deallocating all stage enemy and midboss sprites and thus ensuring that the
boss sprites end up at specific master.lib sprite IDs (patnums). The
hardcoded boss rendering function then expects these sprites to be available
at these exact IDs… which means that the otherwise hardcoded bosses can't
render properly without the dialog script running before them.
There is absolutely no excuse for the game to burden dialog scripts with
this functionality. Sure, delayed deallocation would allow them to blit
stage-specific sprites, but the original games don't do that; probably
because none of the two games feature an unblitting command. And even if
they did, it would have still been cleaner to expose the boss-specific
sprite setup as a single script command that can then also be called from
game code if the script didn't do so. Commands like these just are a recipe
for crashes, especially with parsers that expect fullwidth Shift-JIS
text and where misaligned ASCII text can easily cause these commands to be
skipped.
But then again, it does make for funny screenshot material if you
accidentally the deallocation and then see bosses being turned into stage
enemies:
With all the general details out of the way, here's the command reference:
0 1
0x00 0x01
Selects either the player character (0) or the boss (1) as the
currently speaking character, and moves the cursor to the beginning of
the text box. In TH04, this command also directly starts the new dialog
box, which is probably why it's not prefixed with a \ as it
only makes sense outside of text. TH05 requires a separate 0x0D command to do the
same.
\=1
0x02 0x!!
Replaces the face portrait of the currently active speaking
character with image #1 within her .CD2
file.
\=255
0x02 0xFF
Removes the face portrait from the currently active text box.
\l,filename
0x03 filename 0x00
Calls master.lib's super_entry_bfnt() function, which
loads sprites from a BFNT file to consecutive IDs starting at the
current patnum write cursor.
\c
0x04
Deallocates all stage-specific BFNT sprites (i.e., stage enemies and
midbosses), freeing up conventional RAM for the boss sprites and
ensuring that master.lib's patnum write cursor ends up at
128 /
180.
In TH05's Extra Stage, this command also replaces
📝 the sprites loaded from MIKO16.BFT with the ones from ST06_16.BFT.
\d
Deallocates all face portrait images.
The game automatically does this at the end of each dialog sequence.
However, ZUN wanted to load Stage 6 Yuuka's 76 KiB of additional
animations inside the script via \l, and would have once again
run up against the master.lib heap size limit without that extra free
memory.
\m,filename
0x05 filename 0x00
Stops the currently playing BGM, loads a new one from the given
file, and starts playback.
\m$
0x05 $ 0x00
Stops the currently playing BGM.
Note that TH05 interprets $ as a null-terminated filename as
well.
\m*
Restarts playback of the currently loaded BGM from the
beginning.
\b0,0,0
0x06 0x!!!!0x!!!!0x!!
Blits the master.lib patnum with the ID indicated by the third
parameter to the current VRAM page at the top-left screen position
indicated by the first two parameters.
\e0
Plays the sound effect with the given ID.
\t100
Sets palette brightness via master.lib's
palette_settone() to any value from 0 (fully black) to 200
(fully white). 100 corresponds to the palette's original colors.
\fo1
\fi1
Calls master.lib's palette_black_out() or
palette_black_in() to play a hardware palette fade
animation from or to black, spending roughly 1 frame on each of the 16 fade steps.
\wo1
\wi1
0x09 0x!!
0x0A 0x!!
Calls master.lib's palette_white_out() or
palette_white_in() to play a hardware palette fade
animation from or to white, spending roughly 1 frame on each of the 16 fade steps. The
TH05 version of 0x09 also clears the text in both boxes
before the animation.
\n
0x0B
Starts a new line by resetting the X coordinate of the TRAM cursor
to the left edge of the text area and incrementing the Y coordinate.
The new line will always be the next one below the last one that was
properly started, regardless of whether the text previously wrapped to
the next TRAM row at the edge of the screen.
\g8
Plays a blocking 8-frame screen shake
animation. Copy-pasted from the cutscene parser, but actually used right
at the end of the dialog shown before TH04's Bad Ending.
\ga0
0x0C 0x!!
Shows the gaiji with the given ID from 0 to 255
at the current cursor position, ignoring the per-glyph delay.
\k0
Waits 0 frames (0 = forever) for any key
to be pressed before continuing script execution.
Takes the current dialog cursor as the top-left corner of a
240×48-pixel rectangle, and replaces all text RAM characters within that
rectangle with whitespace.
This is only used to clear the player character's text box before
Shinki's final いくよ‼ box. Shinki has two
consecutive text boxes in all 4 scripts here, and ZUN probably wanted to
clear the otherwise blue text to imply a dramatic pause before Shinki's
final sentence. Nice touch.
(You could, however, also use it after a
box-ending 0xFF command to mess with text RAM in
general.)
\#
Quits the currently running loop. This returns from either the text
loop to the command loop, or it ends the dialog sequence by returning
from the command loop back to gameplay. If this stage of the game later
starts another dialog sequence, it will start at the next script
byte.
\$
Like \#, but first waits for any key to be
pressed.
0xFF
Behaves like TH04's \$ in the text loop, and like
\# in the command loop. Hence, it's not possible in TH05 to
automatically end a text box and advance to the next one without waiting
for a key press.
Unused commands are in gray.
At the end of the day, you might criticize the system for how its landmines
make it annoying to mod in ASCII text, but it all works and does what it's
supposed to. ZUN could have written the cleanest single and central
Shift-JIS iterator that properly chunks a byte buffer into halfwidth and
fullwidth codepoints, and I'd still be throwing it out for the upcoming
non-ASCII translations in favor of something that either also supports UTF-8
or performs dictionary lookups with a full box of text.
The only actual bug can be found in the input detection, which once
again doesn't correctly handle the infamous key
up/key down scancode quirk of PC-98 keyboards. All it takes
is one wrongly placed input polling call, and suddenly you have to think
about how the update cycle behind the PC-98 keyboard state bytes
might cause the game to run the regular 2-frame delay for a single
2-byte chunk of text before it shows the full text of a box after
all… But even this bug is highly theoretical and could probably only be
observed very, very rarely, and exclusively on real hardware.
The same can't be said about TH02 though, but more on that later. Let's
first take a look at its data, which started out much simpler in that game.
The STAGE?.TXT files contain just raw Shift-JIS text with no
trace of commands or structure. Turning on the whitespace display feature in
your editor reveals how the dialog system even assumes a fixed byte
length for each box: 36 bytes per line which will appear on screen, followed
by 4 bytes of padding, which the original files conveniently use to visually
split the lines via a CR/LF newline sequence. Make sure to disable trimming
of trailing whitespace in your editor to not ruin the file when modding the
text…
Consequently, everything else is hardcoded – every effect shown between text
boxes, the face portrait shown for each box, and even how many boxes are
part of each dialog sequence. Which means that the source code now contains
a
long hardcoded list of face IDs for most of the text boxes in the game,
with the rest being part of the
dedicated hardcoded dialog scripts for 2/3 of the
game's stages.
Without the restriction to a fixed set of scripting commands, TH02 naturally
gravitated to having the most varied dialog sequences of all PC-98 Touhou
games. This flexibility certainly facilitated Mima's grand entrance
animation in Stage 4, or the different lines in Stage 4 and 5 depending on
whether you already used a continue or not. Marisa's post-boss dialog even
inserts the number of continues into the text itself – by, you guessed it,
writing to hardcoded byte offsets inside the dialog text before printing it
to the screen. But once again, I have nothing to
criticize here – not even the fact that the alternate dialog scripts have to
mutate the "box cursor" to jump to the intended boxes within the file. I
know that some people in my audience like VMs, but I would have considered
it more bloated if ZUN had implemented a full-blown scripting
language just to handle all these special cases.
Another unique aspect of TH02 is the way it stores its face portraits, which
are infamous for how hard they are to find in the original data files. These
sprites are actually map tiles, stored in MIKO_K.MPN,
and drawn using the same functions used to blit the regular map tiles to the
📝 tile source area in VRAM. We can only guess
why ZUN chose this one out of the three graphics formats he used in TH02:
BFNT supports transparency, but sacrifices one of the 16 colors to do
so. ZUN only used 15 colors for the face portraits, but might have wanted to
keep open the option to use that 16th color. The detailed
backgrounds also suggest that these images were never supposed to be
transparent to begin with.
PI is used for all bigger and non-transparent images, but ZUN would have
had to write a separate small function to blit a 48×48 subsection of such an
image. That certainly wouldn't have stopped him in the TH01 days, but he
probably was already past that point by this game.
That only leaves .MPN. Sure, he did have to slice each face into 9
separate 16×16 "map" tiles to use this format, but that's a small price to
pay in exchange for not having to write any new low-level blitting code,
especially since he must have already had an asset pipeline to generate
these files.
And since you're certainly wondering about all these black tiles at the
edges: Yes, these are not only part of the file and pad it from the required
240×192 pixels to 256×256, but also kept in memory during a stage, wasting
9.5 KiB of conventional RAM. That's 172 seconds of potential input
replay data, just for those people who might still think that we need EMS
for replays.
Alright, we've got the text, we've got the faces, let's slide in the box and
display it all on screen. Apparently though, we also have to blit the player
and option sprites using raw, low-level master.lib function calls in the
process? This can't be right, especially because ZUN
always blits the option sprite associated with the Reimu-A shot type,
regardless of which one the player actually selected. And if you keep moving
above the box area before the dialog starts, you get to see exactly how
wrong this is:
Let's look closer at Reimu's sprite during the slide-in animation, and in
the two frames before:
This one image shows off no less than 4 bugs:
ZUN blits the stationary player sprite here, regardless of whether the
player was previously moving left or right. This is a nice way of indicating
that Reimu stops moving once the dialog starts, but maybe ZUN should
have unblitted the old sprite so that the new one wouldn't have appeared on
top. The game only unblits the 384×64 pixels covered by the dialog box on
every frame of the slide-in animation, so Reimu would only appear correctly
if her sprite happened to be entirely located within that area.
All sprites are shifted up by 1 pixel in frame 2️⃣. This one is not a
bug in the dialog system, but in the main game loop. The game runs the
relevant actions in the following order:
Invalidate any map tiles covered by entities
Redraw invalidated tiles
Decrement the Y coordinate at the top of VRAM according to the
scroll speed
Update and render all game entities
Scroll in new tiles as necessary according to the scroll speed, and
report whether the game has scrolled one pixel past the end of the
map
If that happened, pretend it didn't by incrementing the value
calculated in #3 for all further frames and skipping to
#8.
Issue a GDC SCROLL command to reflect the line
calculated in #3 on the display
Wait for VSync
Flip VRAM pages
Start boss if we're past the end of the map
The problem here: Once the dialog starts, the game has already rendered
an entire new frame, with all sprites being offset by a new Y scroll
offset, without adjusting the graphics GDC's scroll registers to
compensate. Hence, the Y position in 3️⃣ is the correct one, and the
whole existence of frame 2️⃣ is a bug in itself. (Well… OK, probably a
quirk because speedrunning exists, and it would be pretty annoying to
synchronize any video regression tests of the future TH02 Anniversary
Edition if it renders one fewer frame in the middle of a stage.)
ZUN blits the option sprites to their position from frame 1️⃣. This
brings us back to
📝 TH02's special way of retaining the previous and current position in a two-element array, indexed with a VRAM page ID.
Normally, this would be equivalent to using dedicated prev and
cur structure fields and you'd just index it with the back page
for every rendering call. But if you then decide to go single-buffered for
dialogs and render them onto the front page instead…
Note that fixing bug #2 would not cancel out this one – the sprites would
then simply be rendered to their position in the frame before 1️⃣.
And of course, the fixed option sprite ID also counts as a bug.
As for the boxes themselves, it's yet another loop that prints 2-byte chunks
of Shift-JIS text at an even slower fixed interval of 3 frames. In an
interesting quirk though, ZUN assumes that every box starts with the name of
the speaking character in its first two fullwidth Shift-JIS characters,
followed by a fullwidth colon. These 6 bytes are displayed immediately at
the start of every box, without the usual delay. The resulting alignment
looks rather janky with Genjii, whose single right-padded 亀
kanji looks quite awkward with the fullwidth space between the name
and the colon. Kind of makes you wonder why ZUN just didn't spell out his
proper name, 玄爺, instead, but I get the stylistic
difference.
In Stage 4, the two-kanji assumption then breaks with Marisa's three-kanji
name, which causes the full-width colon to be printed as the first delayed
character in each of her boxes:
That's all the issues and quirks in the system itself. The scripts
themselves don't leave much room for bugs as they basically just loop over
the hardcoded face ID array at this level… until we reach the end of the
game. Previously, the slide-in animation could simply use the tile
invalidation and re-rendering system to unblit the box on each frame, which
also explained why Reimu had to be separately rendered on top. But this no
longer works with a custom-rendered boss background, and so the game just
chooses to flood-fill the area with graphics chip color #0:
For Mima's final defeat dialog though, ZUN chose to not even show the box.
He might have realized the issue by that point, or simply preferred the more
dramatic effect this had on the lines. The resulting issues, however, might
even have ramifications for such un-technical things as lore and
character dynamics. As it turns out, the code
for this dialog sequence does in fact render Mima's smiling face for all
boxes?! You only don't see it in the original game because it's rendered to
the other VRAM page that remains invisible during the dialog sequence:
Here's how I interpret the situation:
The function that launches into the final part of the dialog script
starts with dedicated
code to re-render Mima to the back page, on top of the previously
rendered planet background. Since the entire script runs on the front
page (and thus, on top of the previous frame) and the game launches into
the ending immediately after, you don't ever get to see this new partial
frame in the original game.
Showing this partial frame would also ensure that you can actually
read the dialog text without a surrounding box. Then, the white
letters won't ever be put on top of any white bullets – or, worse, be completely invisible if the
dialog is triggered in the middle of Reimu-B's bomb animation, which
fills VRAM with lots of white pixels.
Hence, we've got enough evidence to classify not showing the back page
as a ZUN
bug. 🐞
However, Mima's smiling face jars with the words she says here. Adding
the face would deviate more significantly from the original game than
removing the player shot, item, bullet, or spark sprites would. It's
imaginable that ZUN just forgot about the dedicated code that
re-rendered just Mima to the back page, but the faces add
something to the dialog, and ZUN would have clearly noticed and
fixed it if their absence wasn't intended. Heck, ZUN might have just put
something related to Mima into the code because TH02's dialog system has
no way of not drawing a face for a dialog box. Filling the face
area with graphics chip color #0, as seen in the first and third boxes
of the Extra Stage pre-boss dialog, would have been an alternative, but
that would have been equally wrong with regard to the background.
Hence, the invisible face portrait from the original game is a ZUN
quirk. 🎺
So, the future TH02 Anniversary Edition will fix the bug by showing
the back page, but retain the quirk by rewriting the dialog code to
not blit the face.
And with that, we've secured all in-game dialog for the upcoming non-ASCII
translations! The remaining 2/3 of the last push made
for a good occasion to also decompile the small amount of code related to
TH03's win messages, stored in the @0?TX.TXT files. Similar to
TH02's dialog format, these files are also split into fixed-size blocks of
3×60 bytes. But this time, TH03 loads all 60 bytes of a line, including the
CR/LF line breaking codepoints in the original files, into the statically
allocated buffer that it renders from. These control characters are then
only filtered to whitespace by ZUN's graph_putsa_fx() function.
If you remove the line breaks, you get to use the full 60 bytes on every
line.
The final commits went to the MIKO.CFG loading and saving
functions used in TH04's and TH05's OP.EXE, as well as TH04's
game startup code to finally catch up with
📝 TH05's counterpart from over 3 years ago.
This brought us right in front of the main menu rendering code in both TH04
and TH05, which is identical in both games and will be tackled in the next
PC-98 Touhou delivery.
Next up, though: Returning to Shuusou Gyoku, and adding support for SC-88Pro
recordings as BGM. Which may or may not come with a slight controversy…
Here we go, TH01 Sariel! This is the single biggest boss fight in all of
PC-98 Touhou: If we include all custom effect code we previously decompiled,
it amounts to a total of 10.31% of all code in TH01 (and 3.14%
overall). These 8 pushes cover the final 8.10% (or 2.47% overall),
and are likely to be the single biggest delivery this project will ever see.
Considering that I only managed to decompile 6.00% across all games in 2021,
2022 is already off to a much better start!
So, how can Sariel's code be that large? Well, we've got:
16 danmaku patterns; including the one snowflake detonating into a giant
94×32 hitbox
Gratuitous usage of floating-point variables, bloating the binary thanks
to Turbo C++ 4.0J's particularly horrid code generation
The hatching birds that shoot pellets
3 separate particle systems, sharing the general idea, overall code
structure, and blitting algorithm, but differing in every little detail
The "gust of wind" background transition animation
5 sets of custom monochrome sprite animations, loaded from
BOSS6GR?.GRC
A further 3 hardcoded monochrome 8×8 sprites for the "swaying leaves"
pattern during the second form
In total, it's just under 3,000 lines of C++ code, containing a total of 8
definite ZUN bugs, 3 of them being subpixel/pixel confusions. That might not
look all too bad if you compare it to the
📝 player control function's 8 bugs in 900 lines of code,
but given that Konngara had 0… (Edit (2022-07-17):
Konngara contains two bugs after all: A
📝 possible heap corruption in test or debug mode,
and the infamous
📝 temporary green discoloration.)
And no, the code doesn't make it obvious whether ZUN coded Konngara or
Sariel first; there's just as much evidence for either.
Some terminology before we start: Sariel's first form is separated
into four phases, indicated by different background images, that
cycle until Sariel's HP reach 0 and the second, single-phase form
starts. The danmaku patterns within each phase are also on a cycle,
and the game picks a random but limited number of patterns per phase before
transitioning to the next one. The fight always starts at pattern 1 of phase
1 (the random purple lasers), and each new phase also starts at its
respective first pattern.
Sariel's bugs already start at the graphics asset level, before any code
gets to run. Some of the patterns include a wand raise animation, which is
stored in BOSS6_2.BOS:
The "lowered wand" sprite is missing in this file simply because it's
captured from the regular background image in VRAM, at the beginning of the
fight and after every background transition. What I previously thought to be
📝 background storage code has therefore a
different meaning in Sariel's case. Since this captured sprite is fully
opaque, it will reset the entire 128×128 wand area… wait, 128×128, rather
than 96×96? Yup, this lowered sprite is larger than necessary, wasting 1,967
bytes of conventional memory. That still doesn't quite explain the
second sprite in BOSS6_2.BOS though. Turns out that the black
part is indeed meant to unblit the purple reflection (?) in the first
sprite. But… that's not how you would correctly unblit that?
The first sprite already eats up part of the red HUD line, and the second
one additionally fails to recover the seal pixels underneath, leaving a nice
little black hole and some stray purple pixels until the next background
transition. Quite ironic given that both
sprites do include the right part of the seal, which isn't even part of the
animation.
Just like Konngara, Sariel continues the approach of using a single function
per danmaku pattern or custom entity. While I appreciate that this allows
all pattern- and entity-specific state to be scoped locally to that one
function, it quickly gets ugly as soon as such a function has to do more than one thing.
The "bird function" is particularly awful here: It's just one if(…)
{…} else if(…) {…} else if(…) {…} chain with different
branches for the subfunction parameter, with zero shared code between any of
these branches. It also uses 64-bit floating-point double as
its subpixel type… and since it also takes four of those as parameters
(y'know, just in case the "spawn new bird" subfunction is called), every
call site has to also push four double values onto the stack.
Thanks to Turbo C++ even using the FPU for pushing a 0.0 constant, we
have already reached maximum floating-point decadence before even having
seen a single danmaku pattern. Why decadence? Every possible spawn position
and velocity in both bird patterns just uses pixel resolution, with no
fractional component in sight. And there goes another 720 bytes of
conventional memory.
Speaking about bird patterns, the red-bird one is where we find the first
code-level ZUN bug: The spawn cross circle sprite suddenly disappears after
it finished spawning all the bird eggs. How can we tell it's a bug? Because
there is code to smoothly fly this sprite off the playfield, that
code just suddenly forgets that the sprite's position is stored in Q12.4
subpixels, and treats it as raw screen pixels instead.
As a result, the well-intentioned 640×400
screen-space clipping rectangle effectively shrinks to 38×23 pixels in the
top-left corner of the screen. Which the sprite is always outside of, and
thus never rendered again.
The intended animation is easily restored though:
Also, did you know that birds actually have a quite unfair 14×38-pixel
hitbox? Not that you'd ever collide with them in any of the patterns…
Another 3 of the 8 bugs can be found in the symmetric, interlaced spawn rays
used in three of the patterns, and the 32×32 debris "sprites" shown at their endpoint, at
the edge of the screen. You kinda have to commend ZUN's attention to detail
here, and how he wrote a lot of code for those few rapidly animated pixels
that you most likely don't
even notice, especially with all the other wrong pixels
resulting from rendering glitches. One of the bugs in the very final pattern
of phase 4 even turns them into the vortex sprites from the second pattern
in phase 1 during the first 5 frames of
the first time the pattern is active, and I had to single-step the blitting
calls to verify it.
It certainly was annoying how much time I spent making sense of these bugs,
and all weird blitting offsets, for just a few pixels… Let's look at
something more wholesome, shall we?
So far, we've only seen the PC-98 GRCG being used in RMW (read-modify-write)
mode, which I previously
📝 explained in the context of TH01's red-white HP pattern.
The second of its three modes, TCR (Tile Compare Read), affects VRAM reads
rather than writes, and performs "color extraction" across all 4 bitplanes:
Instead of returning raw 1bpp data from one plane, a VRAM read will instead
return a bitmask, with a 1 bit at every pixel whose full 4-bit color exactly
matches the color at that offset in the GRCG's tile register, and 0
everywhere else. Sariel uses this mode to make sure that the 2×2 particles
and the wind effect are only blitted on top of "air color" pixels, with
other parts of the background behaving like a mask. The algorithm:
Set the GRCG to TCR mode, and all 8 tile register dots to the air
color
Read N bits from the target VRAM position to obtain an N-bit mask where
all 1 bits indicate air color pixels at the respective position
AND that mask with the alpha plane of the sprite to be drawn, shifted to
the correct start bit within the 8-pixel VRAM byte
Set the GRCG to RMW mode, and all 8 tile register dots to the color that
should be drawn
Write the previously obtained bitmask to the same position in VRAM
Quite clever how the extracted colors double as a secondary alpha plane,
making for another well-earned good-code tag. The wind effect really doesn't deserve it, though:
ZUN calculates every intermediate result inside this function
over and over and over again… Together with some ugly
pointer arithmetic, this function turned into one of the most tedious
decompilations in a long while.
This gradual effect is blitted exclusively to the front page of VRAM,
since parts of it need to be unblitted to create the illusion of a gust of
wind. Then again, anything that moves on top of air-colored background –
most likely the Orb – will also unblit whatever it covered of the effect…
As far as I can tell, ZUN didn't use TCR mode anywhere else in PC-98 Touhou.
Tune in again later during a TH04 or TH05 push to learn about TDW, the final
GRCG mode!
Speaking about the 2×2 particle systems, why do we need three of them? Their
only observable difference lies in the way they move their particles:
Up or down in a straight line (used in phases 4 and 2,
respectively)
Left or right in a straight line (used in the second form)
Left and right in a sinusoidal motion (used in phase 3, the "dark
orange" one)
Out of all possible formats ZUN could have used for storing the positions
and velocities of individual particles, he chose a) 64-bit /
double-precision floating-point, and b) raw screen pixels. Want to take a
guess at which data type is used for which particle system?
If you picked double for 1) and 2), and raw screen pixels for
3), you are of course correct! Not that I'm implying
that it should have been the other way round – screen pixels would have
perfectly fit all three systems use cases, as all 16-bit coordinates
are extended to 32 bits for trigonometric calculations anyway. That's what,
another 1.080 bytes of wasted conventional memory? And that's even
calculated while keeping the current architecture, which allocates
space for 3×30 particles as part of the game's global data, although only
one of the three particle systems is active at any given time.
That's it for the first form, time to put on "Civilization
of Magic"! Or "死なばもろとも"? Or "Theme of 地獄めくり"? Or whatever SYUGEN is
supposed to mean…
… and the code of these final patterns comes out roughly as exciting as
their in-game impact. With the big exception of the very final "swaying
leaves" pattern: After 📝 Q4.4,
📝 Q28.4,
📝 Q24.8, and double variables,
this pattern uses… decimal subpixels? Like, multiplying the number by
10, and using the decimal one's digit to represent the fractional part?
Well, sure, if you really insist on moving the leaves in cleanly
represented integer multiples of ⅒, which is infamously impossible in IEEE
754. Aside from aesthetic reasons, it only really combines less precision
(10 possible fractions rather than the usual 16) with the inferior
performance of having to use integer divisions and multiplications rather
than simple bit shifts. And it's surely not because the leaf sprites needed
an extended integer value range of [-3276, +3276], compared to
Q12.4's [-2047, +2048]: They are clipped to 640×400 screen space
anyway, and are removed as soon as they leave this area.
This pattern also contains the second bug in the "subpixel/pixel confusion
hiding an entire animation" category, causing all of
BOSS6GR4.GRC to effectively become unused:
At least their hitboxes are what you would expect, exactly covering the
30×30 pixels of Reimu's sprite. Both animation fixes are available on the th01_sariel_fixes
branch.
After all that, Sariel's main function turned out fairly unspectacular, just
putting everything together and adding some shake, transition, and color
pulse effects with a bunch of unnecessary hardware palette changes. There is
one reference to a missing BOSS6.GRP file during the
first→second form transition, suggesting that Sariel originally had a
separate "first form defeat" graphic, before it was replaced with just the
shaking effect in the final game.
Speaking about the transition code, it is kind of funny how the… um,
imperative and concrete nature of TH01 leads to these 2×24
lines of straight-line code. They kind of look like ZUN rattling off a
laundry list of subsystems and raw variables to be reinitialized, making
damn sure to not forget anything.
Whew! Second PC-98 Touhou boss completely decompiled, 29 to go, and they'll
only get easier from here! 🎉 The next one in line, Elis, is somewhere
between Konngara and Sariel as far as x86 instruction count is concerned, so
that'll need to wait for some additional funding. Next up, therefore:
Looking at a thing in TH03's main game code – really, I have little
idea what it will be!
Now that the store is open again, also check out the
📝 updated RE progress overview I've posted
together with this one. In addition to more RE, you can now also directly
order a variety of mods; all of these are further explained in the order
form itself.
OK, TH01 missile bullets. Can we maybe have a well-behaved entity type,
without any weirdness? Just once?
Ehh, kinda. Apart from another 150 bytes wasted on unused structure members,
this code is indeed more on the low end in terms of overall jank. It does
become very obvious why dodging these missiles in the YuugenMagan, Mima, and
Elis fights feels so awful though: An unfair 46×46 pixel hitbox around
Reimu's center pixel, combined with the comeback of
📝 interlaced rendering, this time in every
stage. ZUN probably did this because missiles are the only 16×16 sprite in
TH01 that is blitted to unaligned X positions, which effectively ends up
touching a 32×16 area of VRAM per sprite.
But even if we assume VRAM writes to be the bottleneck here, it would
have been totally possible to render every missile in every frame at roughly
the same amount of CPU time that the original game uses for interlaced
rendering:
Note that all missile sprites only use two colors, white and green.
Instead of naively going with the usual four bitplanes, extract the
pixels drawn in each of the two used colors into their own bitplanes.
master.lib calls this the "tiny format".
Use the GRCG to draw these two bitplanes in the intended white and green
colors, halving the amount of VRAM writes compared to the original
function.
(Not using the .PTN format would have also avoided the inconsistency of
storing the missile sprites in boss-specific sprite slots.)
That's an optimization that would have significantly benefitted the game, in
contrast to all of the fake ones
introduced in later games. Then again, this optimization is
actually something that the later games do, and it might have in fact been
necessary to achieve their higher bullet counts without significant
slowdown.
After some effectively unused Mima sprite effect code that is so broken that
it's impossible to make sense out of it, we get to the final feature I
wanted to cover for all bosses in parallel before returning to Sariel: The
separate sprite background storage for moving or animated boss sprites in
the Mima, Elis, and Sariel fights. But, uh… why is this necessary to begin
with? Doesn't TH01 already reserve the other VRAM page for backgrounds?
Well, these sprites are quite big, and ZUN didn't want to blit them from
main memory on every frame. After all, TH01 and TH02 had a minimum required
clock speed of 33 MHz, half of the speed required for the later three games.
So, he simply blitted these boss sprites to both VRAM pages, leading
the usual unblitting calls to only remove the other sprites on top of the
boss. However, these bosses themselves want to move across the screen…
and this makes it necessary to save the stage background behind them
in some other way.
Enter .PTN, and its functions to capture a 16×16 or 32×32 square from VRAM
into a sprite slot. No problem with that approach in theory, as the size of
all these bigger sprites is a multiple of 32×32; splitting a larger sprite
into these smaller 32×32 chunks makes the code look just a little bit clumsy
(and, of course, slower).
But somewhere during the development of Mima's fight, ZUN apparently forgot
that those sprite backgrounds existed. And once Mima's 🚫 casting sprite is
blitted on top of her regular sprite, using just regular sprite
transparency, she ends up with her infamous third arm:
Ironically, there's an unused code path in Mima's unblit function where ZUN
assumes a height of 48 pixels for Mima's animation sprites rather than the
actual 64. This leads to even clumsier .PTN function calls for the bottom
128×16 pixels… Failing to unblit the bottom 16 pixels would have also
yielded that third arm, although it wouldn't have looked as natural. Still
wouldn't say that it was intentional; maybe this casting sprite was just
added pretty late in the game's development?
So, mission accomplished, Sariel unblocked… at 2¼ pushes. That's quite some time left for some smaller stage initialization
code, which bundles a bunch of random function calls in places where they
logically really don't belong. The stage opening animation then adds a bunch
of VRAM inter-page copies that are not only redundant but can't even be
understood without knowing the hidden internal state of the last VRAM page
accessed by previous ZUN code…
In better news though: Turbo C++ 4.0 really doesn't seem to have any
complexity limit on inlining arithmetic expressions, as long as they only
operate on compile-time constants. That's how we get macro-free,
compile-time Shift-JIS to JIS X 0208 conversion of the individual code
points in the 東方★靈異伝 string, in a compiler from 1994. As long as you
don't store any intermediate results in variables, that is…
But wait, there's more! With still ¼ of a push left, I also went for the
boss defeat animation, which includes the route selection after the SinGyoku
fight.
As in all other instances, the 2× scaled font is accomplished by first
rendering the text at regular 1× resolution to the other, invisible VRAM
page, and then scaled from there to the visible one. However, the route
selection is unique in that its scaled text is both drawn transparently on
top of the stage background (not onto a black one), and can also change
colors depending on the selection. It would have been no problem to unblit
and reblit the text by rendering the 1× version to a position on the
invisible VRAM page that isn't covered by the 2× version on the visible one,
but ZUN (needlessly) clears the invisible page before rendering any text.
Instead, he assigned a separate VRAM color for both
the 魔界 and 地獄 options, and only changed the palette value for
these colors to white or gray, depending on the correct selection. This is
another one of the
📝 rare cases where TH01 demonstrates good use of PC-98 hardware,
as the 魔界へ and 地獄へ strings don't need to be reblitted during the selection process, only the Orb "cursor" does.
Then, why does this still not count as good-code? When
changing palette colors, you kinda need to be aware of everything
else that can possibly be on screen, which colors are used there, and which
aren't and can therefore be used for such an effect without affecting other
sprites. In this case, well… hover over the image below, and notice how
Reimu's hair and the bomb sprites in the HUD light up when Makai is
selected:
This push did end on a high note though, with the generic, non-SinGyoku
version of the defeat animation being an easily parametrizable copy. And
that's how you decompile another 2.58% of TH01 in just slightly over three
pushes.
Now, we're not only ready to decompile Sariel, but also Kikuri, Elis, and
SinGyoku without needing any more detours into non-boss code. Thanks to the
current TH01 funding subscriptions, I can plan to cover most, if not all, of
Sariel in a single push series, but the currently 3 pending pushes probably
won't suffice for Sariel's 8.10% of all remaining code in TH01. We've got
quite a lot of not specifically TH01-related funds in the backlog to pass
the time though.
Due to recent developments, it actually makes quite a lot of sense to take a
break from TH01: spaztron64 has
managed what every Touhou download site so far has failed to do: Bundling
all 5 game onto a single .HDI together with pre-configured PC-98
emulators and a nice boot menu, and hosting the resulting package on a
proper website. While this first release is already quite good (and much
better than my attempt from 2014), there is still a bit of room for
improvement to be gained from specific ReC98 research. Next up,
therefore:
Researching how TH04 and TH05 use EMS memory, together with the cause
behind TH04's crash in Stage 5 when playing as Reimu without an EMS driver
loaded, and
reverse-engineering TH03's score data file format
(YUME.NEM), which hopefully also comes with a way of building a
file that unlocks all characters without any high scores.
No technical obstacles for once! Just pure overcomplicated ZUN code. Unlike
📝 Konngara's main function, the main TH01
player function was every bit as difficult to decompile as you would expect
from its size.
With TH01 using both separate left- and right-facing sprites for all of
Reimu's moves and separate classes for Reimu's 32×32 and 48×*
sprites, we're already off to a bad start. Sure, sprite mirroring is
minimally more involved on PC-98, as the planar
nature of VRAM requires the bits within an 8-pixel byte to also be
mirrored, in addition to writing the sprite bytes from right to left. TH03
uses a 256-byte lookup table for this, generated at runtime by an infamous
micro-optimized and undecompilable ASM algorithm. With TH01's existing
architecture, ZUN would have then needed to write 3 additional blitting
functions. But instead, he chose to waste a total of 26,112 bytes of memory
on pre-mirrored sprites…
Alright, but surely selecting those sprites from code is no big deal? Just
store the direction Reimu is facing in, and then add some branches to the
rendering code. And there is in fact a variable for Reimu's direction…
during regular arrow-key movement, and another one while shooting and
sliding, and a third as part of the special attack types,
launched out of a slide.
Well, OK, technically, the last two are the same variable. But that's even
worse, because it means that ZUN stores two distinct enums at
the same place in memory: Shooting and sliding uses 1 for left,
2 for right, and 3 for the "invalid" direction of
holding both, while the special attack types indicate the direction in their
lowest bit, with 0 for right and 1 for left. I
decompiled the latter as bitflags, but in ZUN's code, each of the 8
permutations is handled as a distinct type, with copy-pasted and adapted
code… The interpretation of this
two-enum "sub-mode" union variable is controlled
by yet another "mode" variable… and unsurprisingly, two of the bugs in this
function relate to the sub-mode variable being interpreted incorrectly.
Also, "rendering code"? This one big function basically consists of separate
unblit→update→render code snippets for every state and direction Reimu can
be in (moving, shooting, swinging, sliding, special-attacking, and bombing),
pasted together into a tangled mess of nested if(…) statements.
While a lot of the code is copy-pasted, there are still a number of
inconsistencies that defeat the point of my usual refactoring treatment.
After all, with a total of 85 conditional branches, anything more than I did
would have just obscured the control flow too badly, making it even harder
to understand what's going on.
In the end, I spotted a total of 8 bugs in this function, all of which leave
Reimu invisible for one or more frames:
2 frames after all special attacks
2 frames after swing attacks, and
4 frames before swing attacks
Thanks to the last one, Reimu's first swing animation frame is never
actually rendered. So whenever someone complains about TH01 sprite
flickering on an emulator: That emulator is accurate, it's the game that's
poorly written.
And guess what, this function doesn't even contain everything you'd
associate with per-frame player behavior. While it does
handle Yin-Yang Orb repulsion as part of slides and special attacks, it does
not handle the actual player/Orb collision that results in lives being lost.
The funny thing about this: These two things are done in the same function…
Therefore, the life loss animation is also part of another function. This is
where we find the final glitch in this 3-push series: Before the 16-frame
shake, this function only unblits a 32×32 area around Reimu's center point,
even though it's possible to lose a life during the non-deflecting part of a
48×48-pixel animation. In that case, the extra pixels will just stay on
screen during the shake. They are unblitted afterwards though, which
suggests that ZUN was at least somewhat aware of the issue?
Finally, the chance to see the alternate life loss sprite is exactly ⅛.
As for any new insights into game mechanics… you know what? I'm just not
going to write anything, and leave you with this flowchart instead. Here's
the definitive guide on how to control Reimu in TH01 we've been waiting for
24 years:
Pellets are deflected during all gray
states. Not shown is the obvious "double-tap Z and X" transition from
all non-(#1) states to the Bomb state, but that would have made this
diagram even more unwieldy than it turned out. And yes, you can shoot
twice as fast while moving left or right.
While I'm at it, here are two more animations from MIKO.PTN
which aren't referenced by any code:
With that monster of a function taken care of, we've only got boss sprite animation as the final blocker of uninterrupted Sariel progress. Due to some unfavorable code layout in the Mima segment though, I'll need to spend a bit more time with some of the features used there. Next up: The missile bullets used in the Mima and YuugenMagan fights.
Nothing really noteworthy in TH01's stage timer code, just yet another HUD
element that is needlessly drawn into VRAM. Sure, ZUN applies his custom
boldfacing effect on top of the glyphs retrieved from font ROM, but he could
have easily installed those modified glyphs as gaiji.
Well, OK, halfwidth gaiji aren't exactly well documented, and sometimes not
even correctly emulated
📝 due to the same PC-98 hardware oddity I was researching last month.
I've reserved two of the pending anonymous "anything" pushes for the
conclusion of this research, just in case you were wondering why the
outstanding workload is now lower after the two delivered here.
And since it doesn't seem to be clearly documented elsewhere: Every 2 ticks
on the stage timer correspond to 4 frames.
So, TH01 rank pellet speed. The resident pellet speed value is a
factor ranging from a minimum of -0.375 up to a maximum of 0.5 (pixels per
frame), multiplied with the difficulty-adjusted base speed for each pellet
and added on top of that same speed. This multiplier is modified
every time the stage timer reaches 0 and
HARRY UP is shown (+0.05)
for every score-based extra life granted below the maximum number of
lives (+0.025)
every time a bomb is used (+0.025)
on every frame in which the rand value (shown in debug
mode) is evenly divisible by
(1800 - (lives × 200) - (bombs × 50)) (+0.025)
every time Reimu got hit (set to 0 if higher, then -0.05)
when using a continue (set to -0.05 if higher, then -0.125)
Apparently, ZUN noted that these deltas couldn't be losslessly stored in an
IEEE 754 floating-point variable, and therefore didn't store the pellet
speed factor exactly in a way that would correspond to its gameplay effect.
Instead, it's stored similar to Q12.4 subpixels: as a simple integer,
pre-multiplied by 40. This results in a raw range of -15 to 20, which is
what the undecompiled ASM calls still use. When spawning a new pellet, its
base speed is first multiplied by that factor, and then divided by 40 again.
This is actually quite smart: The calculation doesn't need to be aware of
either Q12.4 or the 40× format, as
((Q12.4 * factor×40) / factor×40) still comes out as a
Q12.4 subpixel even if all numbers are integers. The only limiting issue
here would be the potential overflow of the 16-bit multiplication at
unadjusted base speeds of more than 50 pixels per frame, but that'd be
seriously unplayable.
So yeah, pellet speed modifications are indeed gradual, and don't just fall
into the coarse three "high, normal, and low" categories.
That's ⅝ of P0160 done, and the continue and pause menus would make good
candidates to fill up the remaining ⅜… except that it seemed impossible to
figure out the correct compiler options for this code?
The issues centered around the two effects of Turbo C++ 4.0J's
-O switch:
Optimizing jump instructions: merging duplicate successive jumps into a
single one, and merging duplicated instructions at the end of conditional
branches into a single place under a single branch, which the other branches
then jump to
Compressing ADD SP and POP CX
stack-clearing instructions after multiple successive CALLs to
__cdecl functions into a single ADD SP with the
combined parameter stack size of all function calls
But how can the ASM for these functions exhibit #1 but not #2? How
can it be seemingly optimized and unoptimized at the same time? The
only option that gets somewhat close would be -O- -y, which
emits line number information into the .OBJ files for debugging. This
combination provides its own kind of #1, but these functions clearly need
the real deal.
The research into this issue ended up consuming a full push on its own.
In the end, this solution turned out to be completely unrelated to compiler
options, and instead came from the effects of a compiler bug in a totally
different place. Initializing a local structure instance or array like
const uint4_t flash_colors[3] = { 3, 4, 5 };
always emits the { 3, 4, 5 } array into the program's data
segment, and then generates a call to the internal SCOPY@
function which copies this data array to the local variable on the stack.
And as soon as this SCOPY@ call is emitted, the -O
optimization #1 is disabled for the entire rest of the translation
unit?!
So, any code segment with an SCOPY@ call followed by
__cdecl functions must strictly be decompiled from top to
bottom, mirroring the original layout of translation units. That means no
TH01 continue and pause menus before we haven't decompiled the bomb
animation, which contains such an SCOPY@ call. 😕
Luckily, TH01 is the only game where this bug leads to significant
restrictions in decompilation order, as later games predominantly use the
pascal calling convention, in which each function itself clears
its stack as part of its RET instruction.
What now, then? With 51% of REIIDEN.EXE decompiled, we're
slowly running out of small features that can be decompiled within ⅜ of a
push. Good that I haven't been looking a lot into OP.EXE and
FUUIN.EXE, which pretty much only got easy pieces of
code left to do. Maybe I'll end up finishing their decompilations entirely
within these smaller gaps? I still ended up finding one more small
piece in REIIDEN.EXE though: The particle system, seen in the
Mima fight.
I like how everything about this animation is contained within a single
function that is called once per frame, but ZUN could have really
consolidated the spawning code for new particles a bit. In Mima's fight,
particles are only spawned from the top and right edges of the screen, but
the function in fact contains unused code for all other 7 possible
directions, written in quite a bloated manner. This wouldn't feel quite as
unused if ZUN had used an angle parameter instead…
Also, why unnecessarily waste another 40 bytes of
the BSS segment?
But wait, what's going on with the very first spawned particle that just
stops near the bottom edge of the screen in the video above? Well, even in
such a simple and self-contained function, ZUN managed to include an
off-by-one error. This one then results in an out-of-bounds array access on
the 80th frame, where the code attempts to spawn a 41st
particle. If the first particle was unlucky to be both slow enough and
spawned away far enough from the bottom and right edges, the spawning code
will then kill it off before its unblitting code gets to run, leaving its
pixel on the screen until something else overlaps it and causes it to be
unblitted.
Which, during regular gameplay, will quickly happen with the Orb, all the
pellets flying around, and your own player movement. Also, the RNG can
easily spawn this particle at a position and velocity that causes it to
leave the screen more quickly. Kind of impressive how ZUN laid out the
structure
of arrays in a way that ensured practically no effect of this bug on the
game; this glitch could have easily happened every 80 frames instead.
He almost got close to all bugs canceling out each other here!
Next up: The player control functions, including the second-biggest function
in all of PC-98 Touhou.
…or maybe not that soon, as it would have only wasted time to
untangle the bullet update commits from the rest of the progress. So,
here's all the bullet spawning code in TH04 and TH05 instead. I hope
you're ready for this, there's a lot to talk about!
(For the sake of readability, "bullets" in this blog post refers to the
white 8×8 pellets
and all 16×16 bullets loaded from MIKO16.BFT, nothing else.)
But first, what was going on📝 in 2020? Spent 4 pushes on the basic types
and constants back then, still ended up confusing a couple of things, and
even getting some wrong. Like how TH05's "bullet slowdown" flag actually
always prevents slowdown and fires bullets at a constant speed
instead. Or how "random spread" is not the
best term to describe that unused bullet group type in TH04.
Or that there are two distinct ways of clearing all bullets on screen,
which deserve different names:
Bullets are zapped at the end of most midboss and boss phases, and
cleared everywhere else – most notably, during bombs, when losing a
life, or as rewards for extends or a maximized Dream bonus. The
Bonus!! points awarded for zapping bullets are calculated iteratively,
so it's not trivial to give an exact formula for these. For a small number
𝑛 of bullets, it would exactly be 5𝑛³ - 10𝑛² + 15𝑛
points – or, using uth05win's (correct) recursive definition,
Bonus(𝑛) = Bonus(𝑛-1) + 15𝑛² - 5𝑛 + 10.
However, one of the internal step variables is capped at a different number
of points for each difficulty (and game), after which the points only
increase linearly. Hence, "semi-exponential".
On to TH04's bullet spawn code then, because that one can at least be
decompiled. And immediately, we have to deal with a pointless distinction
between regular bullets, with either a decelerating or constant
velocity, and special bullets, with preset velocity changes during
their lifetime. That preset has to be set somewhere, so why have
separate functions? In TH04, this separation continues even down to the
lowest level of functions, where values are written into the global bullet
array. TH05 merges those two functions into one, but then goes too far and
uses self-modifying code to save a grand total of two local variables…
Luckily, the rest of its actual code is identical to TH04.
Most of the complexity in bullet spawning comes from the (thankfully
shared) helper function that calculates the velocities of the individual
bullets within a group. Both games handle each group type via a large
switch statement, which is where TH04 shows off another Turbo
C++ 4.0 optimization: If the range of case values is too
sparse to be meaningfully expressed in a jump table, it usually generates a
linear search through a second value table. But with the -G
command-line option, it instead generates branching code for a binary
search through the set of cases. 𝑂(log 𝑛) as the worst case for a
switch statement in a C++ compiler from 1994… that's so cool.
But still, why are the values in TH04's group type enum all
over the place to begin with?
Unfortunately, this optimization is pretty rare in PC-98 Touhou. It only
shows up here and in a few places in TH02, compared to at least 50
switch value tables.
In all of its micro-optimized pointlessness, TH05's undecompilable version
at least fixes some of TH04's redundancy. While it's still not even
optimal, it's at least a decently written piece of ASM…
if you take the time to understand what's going on there, because it
certainly took quite a bit of that to verify that all of the things which
looked like bugs or quirks were in fact correct. And that's how the code
for this function ended up with 35% comments and blank lines before I could
confidently call it "reverse-engineered"…
Oh well, at least it finally fixes a correctness issue from TH01 and TH04,
where an invalid bullet group type would fill all remaining slots in the
bullet array with identical versions of the first bullet.
Something that both games also share in these functions is an over-reliance
on globals for return values or other local state. The most ridiculous
example here: Tuning the speed of a bullet based on rank actually mutates
the global bullet template… which ZUN then works around by adding a wrapper
function around both regular and special bullet spawning, which saves the
base speed before executing that function, and restores it afterward.
Add another set of wrappers to bypass that exact
tuning, and you've expanded your nice 1-function interface to 4 functions.
Oh, and did I mention that TH04 pointlessly duplicates the first set of
wrapper functions for 3 of the 4 difficulties, which can't even be
explained with "debugging reasons"? That's 10 functions then… and probably
explains why I've procrastinated this feature for so long.
At this point, I also finally stopped decompiling ZUN's original ASM just
for the sake of it. All these small TH05 functions would look horribly
unidiomatic, are identical to their decompiled TH04 counterparts anyway,
except for some unique constant… and, in the case of TH05's rank-based
speed tuning function, actually become undecompilable as soon as we
want to return a C++ class to preserve the semantic meaning of the return
value. Mainly, this is because Turbo C++ does not allow register
pseudo-variables like _AX or _AL to be cast into
class types, even if their size matches. Decompiling that function would
have therefore lowered the quality of the rest of the decompiled code, in
exchange for the additional maintenance and compile-time cost of another
translation unit. Not worth it – and for a TH05 port, you'd already have to
decompile all the rest of the bullet spawning code anyway!
The only thing in there that was still somewhat worth being
decompiled was the pre-spawn clipping and collision detection function. Due
to what's probably a micro-optimization mistake, the TH05 version continues
to spawn a bullet even if it was spawned on top of the player. This might
sound like it has a different effect on gameplay… until you realize that
the player got hit in this case and will either lose a life or deathbomb,
both of which will cause all on-screen bullets to be cleared anyway.
So it's at most a visual glitch.
But while we're at it, can we please stop talking about hitboxes? At least
in the context of TH04 and TH05 bullets. The actual collision detection is
described way better as a kill delta of 8×8 pixels between the
center points of the player and a bullet. You can distribute these pixels
to any combination of bullet and player "hitboxes" that make up 8×8. 4×4
around both the player and bullets? 1×1 for bullets, and 8×8 for the
player? All equally valid… or perhaps none of them, once you keep in mind
that other entity types might have different kill deltas. With that in
mind, the concept of a "hitbox" turns into just a confusing abstraction.
The same is true for the 36×44 graze box delta. For some reason,
this one is not exactly around the center of a bullet, but shifted to the
right by 2 pixels. So, a bullet can be grazed up to 20 pixels right of the
player, but only up to 16 pixels left of the player. uth05win also spotted
this… and rotated the deltas clockwise by 90°?!
Which brings us to the bullet updates… for which I still had to
research a decompilation workaround, because
📝 P0148 turned out to not help at all?
Instead, the solution was to lie to the compiler about the true segment
distance of the popup function and declare its signature far
rather than near. This allowed ZUN to save that ridiculous overhead of 1 additional far function
call/return per frame, and those precious 2 bytes in the BSS segment
that he didn't have to spend on a segment value.
📝 Another function that didn't have just a
single declaration in a common header file… really,
📝 how were these games even built???
The function itself is among the longer ones in both games. It especially
stands out in the indentation department, with 7 levels at its most
indented point – and that's the minimum of what's possible without
goto. Only two more notable discoveries there:
Bullets are the only entity affected by Slow Mode. If the number of
bullets on screen is ≥ (24 + (difficulty * 8) + rank) in TH04,
or (42 + (difficulty * 8)) in TH05, Slow Mode reduces the frame
rate by 33%, by waiting for one additional VSync event every two frames.
The code also reveals a second tier, with 50% slowdown for a slightly
higher number of bullets, but that conditional branch can never be executed
Bullets must have been grazed in a previous frame before they can
be collided with. (Note how this does not apply to bullets that spawned
on top of the player, as explained earlier!)
Whew… When did ReC98 turn into a full-on code review?! 😅 And after all
this, we're still not done with TH04 and TH05 bullets, with all the
special movement types still missing. That should be less than one push
though, once we get to it. Next up: Back to TH01 and Konngara! Now have fun
rewriting the Touhou Wiki Gameplay pages 😛