So, TH02! Being the only game whose main binary hadn't seen any dedicated
attention ever, we get to start the TH02-related blog posts at the very
beginning with the most foundational pieces of code. The stage tile system
is the best place to start here: It not only blocks every entity that is
rendered on top of these tiles, but is curiously placed right next to
master.lib code in TH02, and would need to be separated out into its own
translation unit before we can do the same with all the master.lib
functions.
In late 2018, I already RE'd
📝 TH04's and TH05's stage tile implementation, but haven't properly documented it on this
blog yet, so this post is also going to include the details that are unique
to those games. On a high level, the stage tile system works identically in
all three games:
The tiles themselves are 16×16 pixels large, and a stage can use 100 of
them at the same time.
The optimal way of blitting tiles would involve VRAM-to-VRAM copies
within the same page using the EGC, and that's exactly what the games do.
All tiles are stored on both VRAM pages within the rightmost 64×400 pixels
of the screen just right next to the HUD, and you only don't see them
because the games cover the same area in text RAM with black cells:
To reduce the memory required for a map, tiles are arranged into fixed
vertical sections of a game-specific constant size.
The actual stage map then is simply a list of these tile sections,
ordered from the start/bottom to the top/end.
Any manipulation of specific tiles within the fixed tile sections has to
be hardcoded. An example can be found right in Stage 1, where the Shrine
Tank leaves track marks on the tiles it appears to drive over:
This video also shows off the two issues with Touhou's first-ever
midboss: The replaced tiles are rendered below the midboss
during their first 4 frames, and maybe ZUN should have stopped the
tile replacements one row before the timeout. The first one is
clearly a bug, but it's not so clear-cut with the second one. I'd
need to look at the code to tell for sure whether it's a quirk or a
bug.
The differences between the three games can best be summarized in a table:
TH02
TH04
TH05
Tile image file extension
.MPN
Tile section format
.MAP
Tile section order defined as part of
.DT1
.STD
Tile section index format
0-based ID
0-based ID × 2
Tile image index format
Index between 0 and 100, 1 byte
VRAM offset in tile source area, 2 bytes
Scroll speed control
Hardcoded
Part of the .STD format, defined per referenced tile
section
Redraw granularity
Full tiles (16×16)
Half tiles (16×8)
Rows per tile section
8
5
Maximum number of tile sections
16
32
Lowest number of tile sections used
5 (Stage 3 / Extra)
8 (Stage 6)
11 (Stage 2 / 4)
Highest number of tile sections used
13 (Stage 4)
19 (Extra)
24 (Stage 3)
Maximum length of a map
320 sections (static buffer)
256 sections (format limitation)
Shortest map
14 sections (Stage 5)
20 sections (Stage 5)
15 sections (Stage 2)
Longest map
143 sections (Stage 4)
95 sections (Stage 4)
40 sections (Stage 1 / 4 / Extra)
The most interesting part about stage tiles is probably the fact that some
of the .MAP files contain unused tile sections. 👀 Many
of these are empty, duplicates, or don't really make sense, but a few
are unique, fit naturally into their respective stage, and might have
been part of the map during development. In TH02, we can find three unused
sections in Stage 5:
The non-empty tile sections defined in TH02's STAGE4.MAP,
showing off three unused ones.
These unused tile sections are much more common in the later games though,
where we can find them in TH04's Stage 3, 4, and 5, and TH05's Stage 1, 2,
and 4. I'll document those once I get to finalize the tile rendering code of
these games, to leave some more content for that blog post. TH04/TH05 tile
code would be quite an effective investment of your money in general, as
most of it is identical across both games. Or how about going for a full-on
PC-98 Touhou map viewer and editor GUI?
Compared to TH04 and TH05, TH02's stage tile code definitely feels like ZUN
was just starting to understand how to pull off smooth vertical scrolling on
a PC-98. As such, it comes with a few inefficiencies and suboptimal
implementation choices:
The redraw flag for each tile is stored in a 24×25 bool
array that does nothing with 7 of the 8 bits.
During bombs and the Stage 4, 5, and Extra bosses, the game disables the
tile system to render more elaborate backgrounds, which require the
playfield to be flood-filled with a single color on every frame. ZUN uses
the GRCG's RMW mode rather than TDW mode for this, leaving almost half of
the potential performance on the table for no reason. Literally,
changing modes only involves changing a single constant.
The scroll speed could theoretically be changed at any time. However,
the function that scrolls in new stage tiles can only ever blit part of a
single tile row during every call, so it's up to the caller to ensure
that scrolling always ends up on an exact 16-pixel boundary. TH02 avoids
this problem by keeping the scroll speed constant across a stage, using 2
pixels for Stage 4 and 1 pixel everywhere else.
Since the scroll speed is given in pixels, the slowest speed would be 1
pixel per frame. To allow the even slower speeds seen in the final game,
TH02 adds a separate scroll interval variable that only runs the
scroll function every 𝑛th frame, effectively adding a prescaler to the
scroll speed. In TH04 and TH05, the speed is specified as a Q12.4 value
instead, allowing true fractional speeds at any multiple of
1/16 pixels. This also necessitated a fixed algorithm
that correctly blits tile lines from two rows.
Finally, we've got a few inconsistencies in the way the code handles the
two VRAM pages, which cause a few unnecessary tiles to be rendered to just
one of the two pages. Mentioning that just in case someone tries to play
this game with a fully cleared text RAM and wonders where the flickering
tiles come from.
Even though this was ZUN's first attempt at scrolling tiles, he already saw
it fit to write most of the code in assembly. This was probably a reaction
to all of TH01's performance issues, and the frame rate reduction
workarounds he implemented to keep the game from slowing down too much in
busy places. "If TH01 was all C++ and slow, TH02 better contain more ASM
code, and then it will be fast, right?"
Another reason for going with ASM might be found in the kind of
documentation that may have been available to ZUN. Last year, the PC-98
community discovered and scanned two new game programming tutorial books
from 1991 (1, 2).
Their example code is not only entirely written in assembly, but restricts
itself to the bare minimum of x86 instructions that were available on the
8086 CPU used by the original PC-9801 model 9 years earlier. Such code is
not only suboptimal
on the 486, but can often be actually worse than what your C++
compiler would generate. TH02 is where the trend of bad hand-written ASM
code started, and it
📝 only intensified in ZUN's later games. So,
don't copy code from these books unless you absolutely want to target the
earlier 8086 and 286 models. Which,
📝 as we've gathered from the recent blitting benchmark results,
are not all too common among current real-hardware owners.
That said, all that ASM code really only impacts readability and
maintainability. Apart from the aforementioned issues, the algorithms
themselves are mostly fine – especially since most EGC and GRCG operations
are decently batched this time around, in contrast to TH01.
Luckily, the tile functions merely use inline assembly within a
typical C function and can therefore be at least part of a C++ source file,
even if the result is pretty ugly. This time, we can actually be sure that
they weren't written directly in a .ASM file, because they feature x86
instruction encodings that can only be generated with Turbo C++ 4.0J's
inline assembler, not with TASM. The same can't unfortunately be said about
the following function in the same segment, which marks the tiles covered by
the spark sprites for redrawing. In this one, it took just one dumb hand-written ASM
inconsistency in the function's epilog to make the entire function
undecompilable.
The standard x86 instruction sequence to set up a stack frame in a function prolog looks like this:
PUSH BP
MOV BP, SP
SUB SP, ?? ; if the function needs the stack for local variables
When compiling without optimizations, Turbo C++ 4.0J will
replace this sequence with a single ENTER instruction. That one
is two bytes smaller, but much slower on every x86 CPU except for the 80186
where it was introduced.
In functions without local variables, BP and SP
remain identical, and a single POP BP is all that's needed in
the epilog to tear down such a stack frame before returning from the
function. Otherwise, the function needs an additional MOV SP,
BP instruction to pop all local variables. With x86 being the helpful
CISC architecture that it is, the 80186 also introduced the
LEAVE instruction to perform both tasks. Unlike
ENTER, this single instruction
is faster than the raw two instructions on a lot of x86 CPUs (and
even current ones!), and it's always smaller, taking up just 1 byte instead
of 3. So what if you use LEAVE even if your function
doesn't use local variables? The fact that the
instruction first does the equivalent of MOV SP, BP doesn't
matter if these registers are identical, and who cares about the additional
CPU cycles of LEAVE compared to just POP BP,
right? So that's definitely something you could theoretically do, but
not something that any compiler would ever generate.
And so, TH02 MAIN.EXE decompilation already hits the first
brick wall after two pushes. Awesome! Theoretically,
we could slowly mash through this wall using the 📝 code generator. But having such an inconsistency in the
function epilog would mean that we'd have to keep Turbo C++ 4.0J from
emitting any epilog or prolog code so that we can write our
own. This means that we'd once again have to hide any use of the
SI and DI registers from the compiler… and doing
that requires code generation macros for 22 of the 49 instructions of
the function in question, almost none of which we currently have. So, this
gets quite silly quite fast, especially if we only need to do it
for one single byte.
Instead, wouldn't it be much better if we had a separate build step between
compile and link time that allowed us to replicate mistakes like these by
just patching the compiled .OBJ files? These files still contain the names
of exported functions for linking, which would allow us to look up the code
of a function in a robust manner, navigate to specific instructions using a
disassembler, replace them, and write the modified .OBJ back to disk before
linking. Such a system could then naturally expand to cover all other
decompilation issues, culminating in a full-on optimizer that could even
recreate ZUN's self-modifying code. At that point, we would have sealed away
all of ZUN's ugly ASM code within a separate build step, and could finally
decompile everything into readable C++.
Pulling that off would require a significant tooling investment though.
Patching that one byte in TH02's spark invalidation function could be done
within 1 or 2 pushes, but that's just one issue, and we currently have 32
other .ASM files with undecompilable code. Also, note that this is
fundamentally different from what we're doing with the
debloated branch and the Anniversary Editions. Mistake patching
would purely be about having readable code on master that
compiles into ZUN's exact binaries, without fixing weird
code. The Anniversary Editions go much further and rewrite such code in
a much more fundamental way, improving it further than mistake patching ever
could.
Right now, the Anniversary Editions seem much more
popular, which suggests that people just want 100% RE as fast as
possible so that I can start working on them. In that case, why bother with
such undecompilable functions, and not just leave them in raw and unreadable
x86 opcode form if necessary… But let's first
see how much backer support there actually is for mistake patching before
falling back on that.
The best part though: Once we've made a decision and then covered TH02's
spark and particle systems, that was it, and we will have already RE'd
all ZUN-written PC-98-specific blitting code in this game. Every further
sprite or shape is rendered via master.lib, and is thus decently abstracted.
Guess I'll need to update
📝 the assessment of which PC-98 Touhou game is the easiest to port,
because it sure isn't TH01, as we've seen with all the work required for the first Anniversary Edition build.
Until then, there are still enough parts of the game that don't use any of
the remaining few functions in the _TEXT segment. Previously, I
mentioned in the 📝 status overview blog post
that TH02 had a seemingly weird sprite system, but the spark and point popup
() structures showed that the game just
stores the current and previous position of its entities in a slightly
different way compared to the rest of PC-98 Touhou. Instead of having
dedicated structure fields, TH02 uses two-element arrays indexed with the
active VRAM page. Same thing, and such a pattern even helps during RE since
it's easy to spot once you know what to look for.
There's not much to criticize about the point popup system, except for maybe
a landmine that causes sprite glitches when trying to display more than
99,990 points. Sadly, the final push in this delivery was rounded out by yet
another piece of code at the opposite end of the quality spectrum. The
particle and smear effects for Reimu's bomb animations consist almost
entirely of assembly bloat, which would just be replaced with generic calls
to the generic blitter in this game's future Anniversary Edition.
If I continue to decompile TH02 while avoiding the brick wall, items would
be next, but they probably require two pushes. Next up, therefore:
Integrating Stripe as an alternative payment provider into the order form.
There have been at least three people who reported issues with PayPal, and
Stripe has been working much better in tests. In the meantime, here's a temporary Stripe
order link for everyone. This one is not connected to the cap yet, so
please make sure to stay within whatever value is currently shown on the
front page – I will treat any excess money as donations.
If there's some time left afterward, I might
also add some small improvements to the TH01 Anniversary Edition.
Whew, TH01's boss code just had to end with another beast of a boss, taking
way longer than it should have and leaving uncomfortably little time for the
rest of the game. Let's get right into the overview of YuugenMagan, the most
sequential and scripted battle in this game:
The fight consists of 14 phases, numbered (of course) from 0 to 13.
Unlike all other bosses, the "entrance phase" 0 is a proper gameplay-enabled
part of the fight itself, which is why I also count it here.
YuugenMagan starts with 16 HP, second only to Sariel's 18+6. The HP bar
visualizes the HP threshold for the end of phases 3 (white part) and 7
(red-white part), respectively.
All even-numbered phases change the color of the 邪 kanji in the stage
background, and don't check for collisions between the Orb and any eye.
Almost all of them consequently don't feature an attack, except for phase
0's 1-pixel lasers, spawning symmetrically from the left and right edges of
the playfield towards the center. Which means that yes, YuugenMagan is in
fact invincible during this first attack.
All other attacks are part of the odd-numbered phases:
Phase 1: Slow pellets from the lateral eyes. Ends
at 15 HP.
Phase 3: Missiles from the southern eyes, whose
angles first shift away from Reimu's tracked position and then towards
it. Ends at 12 HP.
Phase 5: Circular pellets sprayed from the lateral
eyes. Ends at 10 HP.
Phase 7: Another missile pattern, but this time
with both eyes shifting their missile angles by the same
(counter-)clockwise delta angles. Ends at 8 HP.
Phase 9: The 3-pixel 3-laser sequence from the
northern eye. Ends at 2 HP.
Phase 11: Spawns the pentagram with one corner out
of every eye, then gradually shrinks and moves it towards the center of
the playfield. Not really an "attack" (surprise) as the pentagram can't
reach the player during this phase, but collision detection is
technically already active here. Ends at 0 HP, marking the earliest
point where the fight itself can possibly end.
Phase 13: Runs through the parallel "pentagram
attack phases". The first five consist of the pentagram alternating its
spinning direction between clockwise and counterclockwise while firing
pellets from each of the five star corners. After that, the pentagram
slams itself into the player, before YuugenMagan loops back to phase
10 to spawn a new pentagram. On the next run through phase 13, the
pentagram grows larger and immediately slams itself into the player,
before starting a new pentagram attack phase cycle with another loop
back to phase 10.
Since the HP bar fills up in a phase with no collision detection,
YuugenMagan is immune to
📝 test/debug mode heap corruption. It's
generally impossible to get YuugenMagan's HP into negative numbers, with
collision detection being disabled every other phase, and all odd-numbered
phases ending immediately upon reaching their HP threshold.
All phases until the very last one have a timeout condition, independent
from YuugenMagan's current HP:
Phase 0: 331 frames
Phase 1: 1101 frames
Phases 2, 4, 6, 8, 10, and 12: 70 frames each
Phases 3 and 7: 5 iterations of the pattern, or
1845 frames each
Phase 5: 5 iterations of the pattern, or 2230
frames
Phase 9: The full duration of the sequence, or 491
frames
Phase 11: Until the pentagram reached its target
position, or 221 frames
This makes it possible to reach phase 13 without dealing a single point of
damage to YuugenMagan, after almost exactly 2½ minutes on any difficulty.
Your actual time will certainly be higher though, as you will have to
HARRY UP at least once during the attempt.
And let's be real, you're very likely to subsequently lose a
life.
At a pixel-perfect 81×61 pixels, the Orb hitboxes are laid out rather
generously this time, reaching quite a bit outside the 64×48 eye sprites:
And that's about the only positive thing I can say about a position
calculation in this fight. Phase 0 already starts with the lasers being off
by 1 pixel from the center of the iris. Sure, 28 may be a nicer number to
add than 29, but the result won't be byte-aligned either way? This is
followed by the eastern laser's hitbox somehow being 24 pixels larger than
the others, stretching a rather unexpected 70 pixels compared to the 46 of
every other laser.
On a more hilarious note, the eye closing keyframe contains the following
(pseudo-)code, comprising the only real accidentally "unused" danmaku
subpattern in TH01:
// Did you mean ">= RANK_HARD"?
if(rank == RANK_HARD) {
eye_north.fire_aimed_wide_5_spread();
eye_southeast.fire_aimed_wide_5_spread();
eye_southwest.fire_aimed_wide_5_spread();
// Because this condition can never be true otherwise.
// As a result, no pellets will be spawned on Lunatic mode.
// (There is another Lunatic-exclusive subpattern later, though.)
if(rank == RANK_LUNATIC) {
eye_west.fire_aimed_wide_5_spread();
eye_east.fire_aimed_wide_5_spread();
}
}
Featuring the weirdly extended hitbox for the eastern laser, as well as
an initial Reimu position that points out the disparity between
byte-aligned rendering and the internal coordinates one final time.
After a few utility functions that look more like a quickly abandoned
refactoring attempt, we quickly get to the main attraction: YuugenMagan
combines the entire boss script and most of the pattern code into a single
2,634-instruction function, totaling 9,677 bytes inside
REIIDEN.EXE. For comparison, ReC98's version of this code
consists of at least 49 functions, excluding those I had to add to work
around ZUN's little inconsistencies, or the ones I added for stylistic
reasons.
In fact, this function is so large that Turbo C++ 4.0J refuses to generate
assembly output for it via the -S command-line option, aborting
with a Compiler table limit exceeded in function error.
Contrary to what the Borland C++ 4.0 User Guide suggests, this
instance of the error is not at all related to the number of function bodies
or any metric of algorithmic complexity, but is simply a result of the
compiler's internal text representation for a single function overflowing a
64 KiB memory segment. Merely shortening the names of enough identifiers
within the function can help to get that representation down below 64 KiB.
If you encounter this error during regular software development, you might
interpret it as the compiler's roundabout way of telling you that it inlined
way more function calls than you probably wanted to have inlined. Because
you definitely won't explicitly spell out such a long function
in newly-written code, right?
At least it wasn't the worst copy-pasting job in this
game; that trophy still goes to 📝 Elis. And
while the tracking code for adjusting an eye's sprite according to the
player's relative position is one of the main causes behind all the bloat,
it's also 100% consistent, and might have been an inlined class method in
ZUN's original code as well.
The clear highlight in this fight though? Almost no coordinate is
precisely calculated where you'd expect it to be. In particular, all
bullet spawn positions completely ignore the direction the eyes are facing
to:
Combining the bottom of the pupil with the exact horizontal
center of the sprite as a whole might sound like a good idea, but looks
especially wrong if the eye is facing right.Here it's the other way round: OK for a right-facing eye, really
wrong for a left-facing one.Dude, the eye is even supposed to track the laser in this
one!Hint: That's not the center of the playfield. At least the
pellets spawned from the corners are sort of correct, but with the corner
calculates precomputed, you could only get them wrong on
purpose.
Due to their effect on gameplay, these inaccuracies can't even be called
"bugs", and made me devise a new "quirk" category instead. More on that in
the TH01 100% blog post, though.
While we did see an accidentally unused bullet pattern earlier, I can
now say with certainty that there are no truly unused danmaku
patterns in TH01, i.e., pattern code that exists but is never called.
However, the code for YuugenMagan's phase 5 reveals another small piece of
danmaku design intention that never shows up within the parameters of
the original game.
By default, pellets are clipped when they fly past the top of the playfield,
which we can clearly observe for the first few pellets of this pattern.
Interestingly though, the second subpattern actually configures its pellets
to fall straight down from the top of the playfield instead. You never see
this happening in-game because ZUN limited that subpattern to a downwards
angle range of 0x73 or 162°, resulting in none of its pellets
ever getting close to the top of the playfield. If we extend that range to a
full 360° though, we can see how ZUN might have originally planned the
pattern to end:
YuugenMagan's phase 5 patterns on every difficulty, with the
second subpattern extended to reveal the different pellet behavior that
remained in the final game code. In the original game, the eyes would stop
spawning bullets on the marked frame.
If we also disregard everything else about YuugenMagan that fits the
upcoming definition of quirk, we're left with 6 "fixable" bugs, all
of which are a symptom of general blitting and unblitting laziness. Funnily
enough, they can all be demonstrated within a short 9-second part of the
fight, from the end of phase 9 up until the pentagram starts spinning in
phase 13:
General flickering whenever any sprite overlaps an eye. This is caused
by only reblitting each eye every 3 frames, and is an issue all throughout
the fight. You might have already spotted it in the videos above.
Each of the two lasers is unblitted and blitted individually instead of
each operation being done for both lasers together. Remember how
📝 ZUN unblits 32 horizontal pixels for every row of a line regardless of its width?
That's why the top part of the left, right-moving laser is never visible,
because it's blitted before the other laser is unblitted.
ZUN forgot to unblit the lasers when phase 9 ends. This footage was
recorded by pressing ↵ Return in test mode (game t or
game d), and it's probably impossible to achieve this during
actual gameplay without TAS techniques. You would have to deal the required
6 points of damage within 491 frames, with the eye being invincible during
240 of them. Simply shooting up an Orb with a horizontal velocity of 0 would
also only work a single time, as boss entities always repel the Orb with a
horizontal velocity of ±4.
The shrinking pentagram is unblitted after the eyes were blitted,
adding another guaranteed frame of flicker on top of the ones in 1). Like in
2), the blockiness of the holes is another result of unblitting 32 pixels
per row at a time.
Another missing unblitting call in a phase transition, as the pentagram
switches from its not quite correctly interpolated shrunk form to a regular
star polygon with a radius of 64 pixels. Indirectly caused by the massively
bloated coordinate calculation for the shrink animation being done
separately for the unblitting and blitting calls. Instead of, y'know, just
doing it once and storing the result in variables that can later be
reused.
The pentagram is not reblitted at all during the first 100 frames of
phase 13. During that rather long time, it's easily possible to remove
it from VRAM completely by covering its area with player shots. Or HARRY UP pellets.
Definitely an appropriate end for this game's entity blitting code.
I'm really looking forward to writing a
proper sprite system for the Anniversary Edition…
And just in case you were wondering about the hitboxes of these pentagrams
as they slam themselves into Reimu:
62 pixels on the X axis, centered around each corner point of the star, 16
pixels below, and extending infinitely far up. The latter part becomes
especially devious because the game always collision-detects
all 5 corners, regardless of whether they've already clipped through
the bottom of the playfield. The simultaneously occurring shape distortions
are simply a result of the line drawing function's rather poor
re-interpolation of any line that runs past the 640×400 VRAM boundaries;
📝 I described that in detail back when I debugged the shootout laser crash.
Ironically, using fixed-size hitboxes for a variable-sized pentagram means
that the larger one is easier to dodge.
The final puzzle in TH01's boss code comes
📝 once again in the form of weird hardware
palette changes. The 邪 kanji on the background
image goes through various colors throughout the fight, which ZUN
implemented by gradually incrementing and decrementing either a single one
or none of the color's three 4-bit components at the beginning of each
even-numbered phase. The resulting color sequence, however, doesn't
quite seem to follow these simple rules:
Phase 0: #DD5邪
Phase 2: #0DF邪
Phase 4: #F0F邪
Phase 6: #00F邪, but at the
end of the phase?!
Phase 8: #0FF邪, at the start
of the phase, #0F5邪, at the end!?
Phase 10: #FF5邪, at the start of
the phase, #F05邪, at the end
Second repetition of phase 12: #005邪
shortly after the start of the phase?!
Adding some debug output sheds light on what's going on there:
Since each iteration of phase 12 adds 63 to the red component, integer
overflow will cause the color to infinitely alternate between dark-blue
and red colors on every 2.03 iterations of the pentagram phase loop. The
65th iteration will therefore be the first one with a dark-blue color
for a third iteration in a row – just in case you manage to stall the
fight for that long.
Yup, ZUN had so much trust in the color clamping done by his hardware
palette functions that he did not clamp the increment operation on the
stage_palette itself. Therefore, the 邪
colors and even the timing of their changes from Phase 6 onwards are
"defined" by wildly incrementing color components beyond their intended
domain, so much that even the underlying signed 8-bit integer ends up
overflowing. Given that the decrement operation on the
stage_paletteis clamped though, this might be another
one of those accidents that ZUN deliberately left in the game,
📝 similar to the conclusion I reached with infinite bumper loops.
But guess what, that's also the last time we're going to encounter this type
of palette component domain quirk! Later games use master.lib's 8-bit
palette system, which keeps the comfort of using a single byte per
component, but shifts the actual hardware color into the top 4 bits, leaving
the bottom 4 bits for added precision during fades.
OK, but now we're done with TH01's bosses! 🎉That was the
8th PC-98 Touhou boss in total, leaving 23 to go.
With all the necessary research into these quirks going well into a fifth
push, I spent the remaining time in that one with transferring most of the
data between YuugenMagan and the upcoming rest of REIIDEN.EXE
into C land. This included the one piece of technical debt in TH01 we've
been carrying around since March 2015, as well as the final piece of the
ending sequence in FUUIN.EXE. Decompiling that executable's
main() function in a meaningful way requires pretty much all
remaining data from REIIDEN.EXE to also be moved into C land,
just in case you were wondering why we're stuck at 99.46% there.
On a more disappointing note, the static initialization code for the
📝 5 boss entity slots ultimately revealed why
YuugenMagan's code is as bloated and redundant as it is: The 5 slots really
are 5 distinct variables rather than a single 5-element array. That's why
ZUN explicitly spells out all 5 eyes every time, because the array he could
have just looped over simply didn't exist. 😕 And while these slot variables
are stored in a contiguous area of memory that I could just have
taken the address of and then indexed it as if it were an array, I
didn't want to annoy future port authors with what would technically be
out-of-bounds array accesses for purely stylistic reasons. At least it
wasn't that big of a deal to rewrite all boss code to use these distinct
variables, although I certainly had to get a bit creative with Elis.
Next up: Finding out how many points we got in totle, and hoping that ZUN
didn't hide more unexpected complexities in the remaining 45 functions of
this game. If you have to spare, there are two ways
in which that amount of money would help right now:
I'm expecting another subscription transaction
from Yanga before the 15th, which would leave to
round out one final TH01 RE push. With that, there'd be a total of 5 left in
the backlog, which should be enough to get the rest of this game done.
I really need to address the performance and usability issues
with all the small videos in this blog. Just look at the video immediately
above, where I disabled the controls because they would cover the debug text
at the bottom… Edit (2022-10-31):… which no longer is an
issue with our 📝 custom video player.
I already reserved this month's anonymous contribution for this work, so it would take another to be turned into a full push.
Here we go, TH01 Sariel! This is the single biggest boss fight in all of
PC-98 Touhou: If we include all custom effect code we previously decompiled,
it amounts to a total of 10.31% of all code in TH01 (and 3.14%
overall). These 8 pushes cover the final 8.10% (or 2.47% overall),
and are likely to be the single biggest delivery this project will ever see.
Considering that I only managed to decompile 6.00% across all games in 2021,
2022 is already off to a much better start!
So, how can Sariel's code be that large? Well, we've got:
16 danmaku patterns; including the one snowflake detonating into a giant
94×32 hitbox
Gratuitous usage of floating-point variables, bloating the binary thanks
to Turbo C++ 4.0J's particularly horrid code generation
The hatching birds that shoot pellets
3 separate particle systems, sharing the general idea, overall code
structure, and blitting algorithm, but differing in every little detail
The "gust of wind" background transition animation
5 sets of custom monochrome sprite animations, loaded from
BOSS6GR?.GRC
A further 3 hardcoded monochrome 8×8 sprites for the "swaying leaves"
pattern during the second form
In total, it's just under 3,000 lines of C++ code, containing a total of 8
definite ZUN bugs, 3 of them being subpixel/pixel confusions. That might not
look all too bad if you compare it to the
📝 player control function's 8 bugs in 900 lines of code,
but given that Konngara had 0… (Edit (2022-07-17):
Konngara contains two bugs after all: A
📝 possible heap corruption in test or debug mode,
and the infamous
📝 temporary green discoloration.)
And no, the code doesn't make it obvious whether ZUN coded Konngara or
Sariel first; there's just as much evidence for either.
Some terminology before we start: Sariel's first form is separated
into four phases, indicated by different background images, that
cycle until Sariel's HP reach 0 and the second, single-phase form
starts. The danmaku patterns within each phase are also on a cycle,
and the game picks a random but limited number of patterns per phase before
transitioning to the next one. The fight always starts at pattern 1 of phase
1 (the random purple lasers), and each new phase also starts at its
respective first pattern.
Sariel's bugs already start at the graphics asset level, before any code
gets to run. Some of the patterns include a wand raise animation, which is
stored in BOSS6_2.BOS:
Umm… OK? The same sprite twice, just with slightly different
colors? So how is the wand lowered again?
The "lowered wand" sprite is missing in this file simply because it's
captured from the regular background image in VRAM, at the beginning of the
fight and after every background transition. What I previously thought to be
📝 background storage code has therefore a
different meaning in Sariel's case. Since this captured sprite is fully
opaque, it will reset the entire 128×128 wand area… wait, 128×128, rather
than 96×96? Yup, this lowered sprite is larger than necessary, wasting 1,967
bytes of conventional memory. That still doesn't quite explain the
second sprite in BOSS6_2.BOS though. Turns out that the black
part is indeed meant to unblit the purple reflection (?) in the first
sprite. But… that's not how you would correctly unblit that?
The first sprite already eats up part of the red HUD line, and the second
one additionally fails to recover the seal pixels underneath, leaving a nice
little black hole and some stray purple pixels until the next background
transition. Quite ironic given that both
sprites do include the right part of the seal, which isn't even part of the
animation.
Just like Konngara, Sariel continues the approach of using a single function
per danmaku pattern or custom entity. While I appreciate that this allows
all pattern- and entity-specific state to be scoped locally to that one
function, it quickly gets ugly as soon as such a function has to do more than one thing.
The "bird function" is particularly awful here: It's just one if(…)
{…} else if(…) {…} else if(…) {…} chain with different
branches for the subfunction parameter, with zero shared code between any of
these branches. It also uses 64-bit floating-point double as
its subpixel type… and since it also takes four of those as parameters
(y'know, just in case the "spawn new bird" subfunction is called), every
call site has to also push four double values onto the stack.
Thanks to Turbo C++ even using the FPU for pushing a 0.0 constant, we
have already reached maximum floating-point decadence before even having
seen a single danmaku pattern. Why decadence? Every possible spawn position
and velocity in both bird patterns just uses pixel resolution, with no
fractional component in sight. And there goes another 720 bytes of
conventional memory.
Speaking about bird patterns, the red-bird one is where we find the first
code-level ZUN bug: The spawn cross circle sprite suddenly disappears after
it finished spawning all the bird eggs. How can we tell it's a bug? Because
there is code to smoothly fly this sprite off the playfield, that
code just suddenly forgets that the sprite's position is stored in Q12.4
subpixels, and treats it as raw screen pixels instead.
As a result, the well-intentioned 640×400
screen-space clipping rectangle effectively shrinks to 38×23 pixels in the
top-left corner of the screen. Which the sprite is always outside of, and
thus never rendered again.
The intended animation is easily restored though:
Sariel's third pattern, and the first to spawn birds, in its original
and fixed versions. Note that I somewhat fixed the bird hatch animation
as well: ZUN's code never unblits any frame of animation there, and
simply blits every new one on top of the previous one.
Also, did you know that birds actually have a quite unfair 14×38-pixel
hitbox? Not that you'd ever collide with them in any of the patterns…
Another 3 of the 8 bugs can be found in the symmetric, interlaced spawn rays
used in three of the patterns, and the 32×32 debris "sprites" shown at their endpoint, at
the edge of the screen. You kinda have to commend ZUN's attention to detail
here, and how he wrote a lot of code for those few rapidly animated pixels
that you most likely don't
even notice, especially with all the other wrong pixels
resulting from rendering glitches. One of the bugs in the very final pattern
of phase 4 even turns them into the vortex sprites from the second pattern
in phase 1 during the first 5 frames of
the first time the pattern is active, and I had to single-step the blitting
calls to verify it.
It certainly was annoying how much time I spent making sense of these bugs,
and all weird blitting offsets, for just a few pixels… Let's look at
something more wholesome, shall we?
So far, we've only seen the PC-98 GRCG being used in RMW (read-modify-write)
mode, which I previously
📝 explained in the context of TH01's red-white HP pattern.
The second of its three modes, TCR (Tile Compare Read), affects VRAM reads
rather than writes, and performs "color extraction" across all 4 bitplanes:
Instead of returning raw 1bpp data from one plane, a VRAM read will instead
return a bitmask, with a 1 bit at every pixel whose full 4-bit color exactly
matches the color at that offset in the GRCG's tile register, and 0
everywhere else. Sariel uses this mode to make sure that the 2×2 particles
and the wind effect are only blitted on top of "air color" pixels, with
other parts of the background behaving like a mask. The algorithm:
Set the GRCG to TCR mode, and all 8 tile register dots to the air
color
Read N bits from the target VRAM position to obtain an N-bit mask where
all 1 bits indicate air color pixels at the respective position
AND that mask with the alpha plane of the sprite to be drawn, shifted to
the correct start bit within the 8-pixel VRAM byte
Set the GRCG to RMW mode, and all 8 tile register dots to the color that
should be drawn
Write the previously obtained bitmask to the same position in VRAM
Quite clever how the extracted colors double as a secondary alpha plane,
making for another well-earned good-code tag. The wind effect really doesn't deserve it, though:
ZUN calculates every intermediate result inside this function
over and over and over again… Together with some ugly
pointer arithmetic, this function turned into one of the most tedious
decompilations in a long while.
This gradual effect is blitted exclusively to the front page of VRAM,
since parts of it need to be unblitted to create the illusion of a gust of
wind. Then again, anything that moves on top of air-colored background –
most likely the Orb – will also unblit whatever it covered of the effect…
As far as I can tell, ZUN didn't use TCR mode anywhere else in PC-98 Touhou.
Tune in again later during a TH04 or TH05 push to learn about TDW, the final
GRCG mode!
Speaking about the 2×2 particle systems, why do we need three of them? Their
only observable difference lies in the way they move their particles:
Up or down in a straight line (used in phases 4 and 2,
respectively)
Left or right in a straight line (used in the second form)
Left and right in a sinusoidal motion (used in phase 3, the "dark
orange" one)
Out of all possible formats ZUN could have used for storing the positions
and velocities of individual particles, he chose a) 64-bit /
double-precision floating-point, and b) raw screen pixels. Want to take a
guess at which data type is used for which particle system?
If you picked double for 1) and 2), and raw screen pixels for
3), you are of course correct! Not that I'm implying
that it should have been the other way round – screen pixels would have
perfectly fit all three systems use cases, as all 16-bit coordinates
are extended to 32 bits for trigonometric calculations anyway. That's what,
another 1.080 bytes of wasted conventional memory? And that's even
calculated while keeping the current architecture, which allocates
space for 3×30 particles as part of the game's global data, although only
one of the three particle systems is active at any given time.
That's it for the first form, time to put on "Civilization
of Magic"! Or "死なばもろとも"? Or "Theme of 地獄めくり"? Or whatever SYUGEN is
supposed to mean…
… and the code of these final patterns comes out roughly as exciting as
their in-game impact. With the big exception of the very final "swaying
leaves" pattern: After 📝 Q4.4,
📝 Q28.4,
📝 Q24.8, and double variables,
this pattern uses… decimal subpixels? Like, multiplying the number by
10, and using the decimal one's digit to represent the fractional part?
Well, sure, if you really insist on moving the leaves in cleanly
represented integer multiples of ⅒, which is infamously impossible in IEEE
754. Aside from aesthetic reasons, it only really combines less precision
(10 possible fractions rather than the usual 16) with the inferior
performance of having to use integer divisions and multiplications rather
than simple bit shifts. And it's surely not because the leaf sprites needed
an extended integer value range of [-3276, +3276], compared to
Q12.4's [-2047, +2048]: They are clipped to 640×400 screen space
anyway, and are removed as soon as they leave this area.
This pattern also contains the second bug in the "subpixel/pixel confusion
hiding an entire animation" category, causing all of
BOSS6GR4.GRC to effectively become unused:
The "swaying leaves" pattern. ZUN intended a splash animation to be
shown once each leaf "spark" reaches the top of the playfield, which is
never displayed in the original game.
At least their hitboxes are what you would expect, exactly covering the
30×30 pixels of Reimu's sprite. Both animation fixes are available on the th01_sariel_fixes
branch.
After all that, Sariel's main function turned out fairly unspectacular, just
putting everything together and adding some shake, transition, and color
pulse effects with a bunch of unnecessary hardware palette changes. There is
one reference to a missing BOSS6.GRP file during the
first→second form transition, suggesting that Sariel originally had a
separate "first form defeat" graphic, before it was replaced with just the
shaking effect in the final game.
Speaking about the transition code, it is kind of funny how the… um,
imperative and concrete nature of TH01 leads to these 2×24
lines of straight-line code. They kind of look like ZUN rattling off a
laundry list of subsystems and raw variables to be reinitialized, making
damn sure to not forget anything.
Whew! Second PC-98 Touhou boss completely decompiled, 29 to go, and they'll
only get easier from here! 🎉 The next one in line, Elis, is somewhere
between Konngara and Sariel as far as x86 instruction count is concerned, so
that'll need to wait for some additional funding. Next up, therefore:
Looking at a thing in TH03's main game code – really, I have little
idea what it will be!
Now that the store is open again, also check out the
📝 updated RE progress overview I've posted
together with this one. In addition to more RE, you can now also directly
order a variety of mods; all of these are further explained in the order
form itself.