⮜ Blog

⮜ List of tags

Showing all posts tagged
and

📝 Posted:
🚚 Summary of:
P0207, P0208, P0209, P0210, P0211
Commits:
454c105...c26ef4b, c26ef4b...239a3ec, 239a3ec...5030867, 5030867...149fbca, 149fbca...d398a94
💰 Funded by:
GhostPhanom, Yanga, Arandui, Lmocinemod
🏷 Tags:

Whew, TH01's boss code just had to end with another beast of a boss, taking way longer than it should have and leaving uncomfortably little time for the rest of the game. Let's get right into the overview of YuugenMagan, the most sequential and scripted battle in this game:


At a pixel-perfect 81×61 pixels, the Orb hitboxes are laid out rather generously this time, reaching quite a bit outside the 64×48 eye sprites:

TH01 YuugenMagan's hitboxes.

And that's about the only positive thing I can say about a position calculation in this fight. Phase 0 already starts with the lasers being off by 1 pixel from the center of the iris. Sure, 28 may be a nicer number to add than 29, but the result won't be byte-aligned either way? This is followed by the eastern laser's hitbox somehow being 24 pixels larger than the others, stretching a rather unexpected 70 pixels compared to the 46 of every other laser.
On a more hilarious note, the eye closing keyframe contains the following (pseudo-)code, comprising the only real accidentally "unused" danmaku subpattern in TH01:

// Did you mean ">= RANK_HARD"?
if(rank == RANK_HARD) {
	eye_north.fire_aimed_wide_5_spread();
	eye_southeast.fire_aimed_wide_5_spread();
	eye_southwest.fire_aimed_wide_5_spread();

	// Because this condition can never be true otherwise.
	// As a result, no pellets will be spawned on Lunatic mode.
	// (There is another Lunatic-exclusive subpattern later, though.)
	if(rank == RANK_LUNATIC) {
		eye_west.fire_aimed_wide_5_spread();
		eye_east.fire_aimed_wide_5_spread();
	}
}

Featuring the weirdly extended hitbox for the eastern laser, as well as an initial Reimu position that points out the disparity between byte-aligned rendering and the internal coordinates one final time.

After a few utility functions that look more like a quickly abandoned refactoring attempt, we quickly get to the main attraction: YuugenMagan combines the entire boss script and most of the pattern code into a single 2,634-instruction function, totaling 9,677 bytes inside REIIDEN.EXE. For comparison, ReC98's version of this code consists of at least 49 functions, excluding those I had to add to work around ZUN's little inconsistencies, or the ones I added for stylistic reasons.
In fact, this function is so large that Turbo C++ 4.0J refuses to generate assembly output for it via the -S command-line option, aborting with a Compiler table limit exceeded in function error. Contrary to what the Borland C++ 4.0 User Guide suggests, this instance of the error is not at all related to the number of function bodies or any metric of algorithmic complexity, but is simply a result of the compiler's internal text representation for a single function overflowing a 64 KiB memory segment. Merely shortening the names of enough identifiers within the function can help to get that representation down below 64 KiB. If you encounter this error during regular software development, you might interpret it as the compiler's roundabout way of telling you that it inlined way more function calls than you probably wanted to have inlined. Because you definitely won't explicitly spell out such a long function in newly-written code, right? :tannedcirno:
At least it wasn't the worst copy-pasting job in this game; that trophy still goes to 📝 Elis. And while the tracking code for adjusting an eye's sprite according to the player's relative position is one of the main causes behind all the bloat, it's also 100% consistent, and might have been an inlined class method in ZUN's original code as well.

The clear highlight in this fight though? Almost no coordinate is precisely calculated where you'd expect it to be. In particular, all bullet spawn positions completely ignore the direction the eyes are facing to:

Pellets unexpectedly spawned at the exact
	bottom center of an eye
Combining the bottom of the pupil with the exact horizontal center of the sprite as a whole might sound like a good idea, but looks especially wrong if the eye is facing right.
Missile spawn positions in the TH01
	YuugenMagan fight
Here it's the other way round: OK for a right-facing eye, really wrong for a left-facing one.
Spawn position of the 3-pixel laser in the
	TH01 YuugenMagan fight
Dude, the eye is even supposed to track the laser in this one!
The final center position of the regular
	pentagram in the TH01 YuugenMagan fight
Hint: That's not the center of the playfield. At least the pellets spawned from the corners are sort of correct, but with the corner calculates precomputed, you could only get them wrong on purpose.

Due to their effect on gameplay, these inaccuracies can't even be called "bugs", and made me devise a new "quirk" category instead. More on that in the TH01 100% blog post, though.


While we did see an accidentally unused bullet pattern earlier, I can now say with certainty that there are no truly unused danmaku patterns in TH01, i.e., pattern code that exists but is never called. However, the code for YuugenMagan's phase 5 reveals another small piece of danmaku design intention that never shows up within the parameters of the original game.
By default, pellets are clipped when they fly past the top of the playfield, which we can clearly observe for the first few pellets of this pattern. Interestingly though, the second subpattern actually configures its pellets to fall straight down from the top of the playfield instead. You never see this happening in-game because ZUN limited that subpattern to a downwards angle range of 0x73 or 162°, resulting in none of its pellets ever getting close to the top of the playfield. If we extend that range to a full 360° though, we can see how ZUN might have originally planned the pattern to end:

YuugenMagan's phase 5 patterns on every difficulty, with the second subpattern extended to reveal the different pellet behavior that remained in the final game code. In the original game, the eyes would stop spawning bullets on the marked frame.

If we also disregard everything else about YuugenMagan that fits the upcoming definition of quirk, we're left with 6 "fixable" bugs, all of which are a symptom of general blitting and unblitting laziness. Funnily enough, they can all be demonstrated within a short 9-second part of the fight, from the end of phase 9 up until the pentagram starts spinning in phase 13:

  1. General flickering whenever any sprite overlaps an eye. This is caused by only reblitting each eye every 3 frames, and is an issue all throughout the fight. You might have already spotted it in the videos above.
  2. Each of the two lasers is unblitted and blitted individually instead of each operation being done for both lasers together. Remember how 📝 ZUN unblits 32 horizontal pixels for every row of a line regardless of its width? That's why the top part of the left, right-moving laser is never visible, because it's blitted before the other laser is unblitted.
  3. ZUN forgot to unblit the lasers when phase 9 ends. This footage was recorded by pressing ↵ Return in test mode (game t or game d), and it's probably impossible to achieve this during actual gameplay without TAS techniques. You would have to deal the required 6 points of damage within 491 frames, with the eye being invincible during 240 of them. Simply shooting up an Orb with a horizontal velocity of 0 would also only work a single time, as boss entities always repel the Orb with a horizontal velocity of ±4.
  4. The shrinking pentagram is unblitted after the eyes were blitted, adding another guaranteed frame of flicker on top of the ones in 1). Like in 2), the blockiness of the holes is another result of unblitting 32 pixels per row at a time.
  5. Another missing unblitting call in a phase transition, as the pentagram switches from its not quite correctly interpolated shrunk form to a regular star polygon with a radius of 64 pixels. Indirectly caused by the massively bloated coordinate calculation for the shrink animation being done separately for the unblitting and blitting calls. Instead of, y'know, just doing it once and storing the result in variables that can later be reused.
  6. The pentagram is not reblitted at all during the first 100 frames of phase 13. During that rather long time, it's easily possible to remove it from VRAM completely by covering its area with player shots. Or HARRY UP pellets.

Definitely an appropriate end for this game's entity blitting code. :onricdennat: I'm really looking forward to writing a proper sprite system for the Anniversary Edition…

And just in case you were wondering about the hitboxes of these pentagrams as they slam themselves into Reimu:

62 pixels on the X axis, centered around each corner point of the star, 16 pixels below, and extending infinitely far up. The latter part becomes especially devious because the game always collision-detects all 5 corners, regardless of whether they've already clipped through the bottom of the playfield. The simultaneously occurring shape distortions are simply a result of the line drawing function's rather poor re-interpolation of any line that runs past the 640×400 VRAM boundaries; 📝 I described that in detail back when I debugged the shootout laser crash. Ironically, using fixed-size hitboxes for a variable-sized pentagram means that the larger one is easier to dodge.


The final puzzle in TH01's boss code comes 📝 once again in the form of weird hardware palette changes. The kanji on the background image goes through various colors throughout the fight, which ZUN implemented by gradually incrementing and decrementing either a single one or none of the color's three 4-bit components at the beginning of each even-numbered phase. The resulting color sequence, however, doesn't quite seem to follow these simple rules:

Adding some debug output sheds light on what's going on there:

Since each iteration of phase 12 adds 63 to the red component, integer overflow will cause the color to infinitely alternate between dark-blue and red colors on every 2.03 iterations of the pentagram phase loop. The 65th iteration will therefore be the first one with a dark-blue color for a third iteration in a row – just in case you manage to stall the fight for that long.

Yup, ZUN had so much trust in the color clamping done by his hardware palette functions that he did not clamp the increment operation on the stage_palette itself. :zunpet: Therefore, the 邪 colors and even the timing of their changes from Phase 6 onwards are "defined" by wildly incrementing color components beyond their intended domain, so much that even the underlying signed 8-bit integer ends up overflowing. Given that the decrement operation on the stage_palette is clamped though, this might be another one of those accidents that ZUN deliberately left in the game, 📝 similar to the conclusion I reached with infinite bumper loops.
But guess what, that's also the last time we're going to encounter this type of palette component domain quirk! Later games use master.lib's 8-bit palette system, which keeps the comfort of using a single byte per component, but shifts the actual hardware color into the top 4 bits, leaving the bottom 4 bits for added precision during fades.

OK, but now we're done with TH01's bosses! 🎉That was the 8th PC-98 Touhou boss in total, leaving 23 to go.


With all the necessary research into these quirks going well into a fifth push, I spent the remaining time in that one with transferring most of the data between YuugenMagan and the upcoming rest of REIIDEN.EXE into C land. This included the one piece of technical debt in TH01 we've been carrying around since March 2015, as well as the final piece of the ending sequence in FUUIN.EXE. Decompiling that executable's main() function in a meaningful way requires pretty much all remaining data from REIIDEN.EXE to also be moved into C land, just in case you were wondering why we're stuck at 99.46% there.
On a more disappointing note, the static initialization code for the 📝 5 boss entity slots ultimately revealed why YuugenMagan's code is as bloated and redundant as it is: The 5 slots really are 5 distinct variables rather than a single 5-element array. That's why ZUN explicitly spells out all 5 eyes every time, because the array he could have just looped over simply didn't exist. 😕 And while these slot variables are stored in a contiguous area of memory that I could just have taken the address of and then indexed it as if it were an array, I didn't want to annoy future port authors with what would technically be out-of-bounds array accesses for purely stylistic reasons. At least it wasn't that big of a deal to rewrite all boss code to use these distinct variables, although I certainly had to get a bit creative with Elis.

Next up: Finding out how many points we got in totle, and hoping that ZUN didn't hide more unexpected complexities in the remaining 45 functions of this game. If you have to spare, there are two ways in which that amount of money would help right now:

📝 Posted:
🚚 Summary of:
P0193, P0194, P0195, P0196, P0197
Commits:
e1f3f9f...183d7a2, 183d7a2...5d93a50, 5d93a50...e18c53d, e18c53d...57c9ac5, 57c9ac5...48db0b7
💰 Funded by:
Ember2528, Yanga
🏷 Tags:

With Elis, we've not only reached the midway point in TH01's boss code, but also a bunch of other milestones: Both REIIDEN.EXE and TH01 as a whole have crossed the 75% RE mark, and overall position independence has also finally cracked 80%!

And it got done in 4 pushes again? Yup, we're back to 📝 Konngara levels of redundancy and copy-pasta. This time, it didn't even stop at the big copy-pasted code blocks for the rift sprite and 256-pixel circle animations, with the words "redundant" and "unnecessary" ending up a total of 18 times in my source code comments.
But damn is this fight broken. As usual with TH01 bosses, let's start with a high-level overview:

This puts the earliest possible end of the fight at the first frame of phase 5. However, nothing prevents Elis' HP from reaching 0 before that point. You can nicely see this in 📝 debug mode: Wait until the HP bar has filled up to avoid heap corruption, hold ↵ Return to reduce her HP to 0, and watch how Elis still goes through a total of two patterns* and four teleport animations before accepting defeat.

But wait, heap corruption? Yup, there's a bug in the HP bar that already affected Konngara as well, and it isn't even just about the graphical glitches generated by negative HP:

Since Elis starts with 14 HP, which is an even number, this corruption is trivial to cause: Simply hold ↵ Return from the beginning of the fight, and the completion condition will never be true, as the HP and frame numbers run past the off-by-one meeting point.

Edit (2023-07-21): Pressing ↵ Return to reduce HP also works in test mode (game t). There, the game doesn't even check the heap, and consequently won't report any corruption, allowing the HP bar to be glitched even further.

Regular gameplay, however, entirely prevents this due to the fixed start positions of Reimu and the Orb, the Orb's fixed initial trajectory, and the 50 frames of delay until a bomb deals damage to a boss. These aspects make it impossible to hit Elis within the first 14 frames of phase 1, and ensure that her HP bar is always filled up completely. So ultimately, this bug ends up comparable in seriousness to the 📝 recursion / stack overflow bug in the memory info screen.


These wavy teleport animations point to a quite frustrating architectural issue in this fight. It's not even the fact that unblitting the yellow star sprites rips temporary holes into Elis' sprite; that's almost expected from TH01 at this point. Instead, it's all because of this unused frame of the animation:

An unused wave animation frame from TH01's BOSS5.BOS

With this sprite still being part of BOSS5.BOS, Girl-Elis has a total of 9 animation frames, 1 more than the 📝 8 per-entity sprites allowed by ZUN's architecture. The quick and easy solution would have been to simply bump the sprite array size by 1, but… nah, this would have added another 20 bytes to all 6 of the .BOS image slots. :zunpet: Instead, ZUN wrote the manual position synchronization code I mentioned in that 2020 blog post. Ironically, he then copy-pasted this snippet of code often enough that it ended up taking up more than 120 bytes in the Elis fight alone – with, you guessed it, some of those copies being redundant. Not to mention that just going from 8 to 9 sprites would have allowed ZUN to go down from 6 .BOS image slots to 3. That would have actually saved 420 bytes in addition to the manual synchronization trouble. Looking forward to SinGyoku, that's going to be fun again…


As for the fight itself, it doesn't take long until we reach its most janky danmaku pattern, right in phase 1:

The "pellets along circle" pattern on Lunatic, in its original version and with fanfiction fixes for everything that can potentially be interpreted as a bug.

Then again, it might very well be that all of this was intended, or, most likely, just left in the game as a happy accident. The latter interpretation would explain why ZUN didn't just delete the rendering calls for the lower-right quarter of the circle, because seriously, how would you not spot that? The phase 3 patterns continue with more minor graphical glitches that aren't even worth talking about anymore.


And then Elis transforms into her bat form at the beginning of Phase 5, which displays some rather unique hitboxes. The one against the Orb is fine, but the one against player shots…

… uses the bat's X coordinate for both X and Y dimensions. :zunpet: In regular gameplay, it's not too bad as most of the bat patterns fire aimed pellets which typically don't allow you to move below her sprite to begin with. But if you ever tried destroying these pellets while standing near the middle of the playfield, now you know why that didn't work. This video also nicely points out how the bat, like any boss sprite, is only ever blitted at positions on the 8×1-pixel VRAM byte grid, while collision detection uses the actual pixel position.

The bat form patterns are all relatively simple, with little variation depending on the difficulty level, except for the "slow pellet spreads" pattern. This one is almost easiest to dodge on Lunatic, where the 5-spreads are not only always fired downwards, but also at the hardcoded narrow delta angle, leaving plenty of room for the player to move out of the way:

The "slow pellet spreads" pattern of Elis' bat form, on every difficulty. Which version do you think is the easiest one?

Finally, we've got another potential timesave in the girl form's "safety circle" pattern:

After the circle spawned completely, you lose a life by moving outside it, but doing that immediately advances the pattern past the circle part. This part takes 200 frames, but the defeat animation only takes 82 frames, so you can save up to 118 frames there.

Final funny tidbit: As with all dynamic entities, this circle is only blitted to VRAM page 0 to allow easy unblitting. However, it's also kind of static, and there needs to be some way to keep the Orb, the player shots, and the pellets from ripping holes into it. So, ZUN just re-blits the circle every… 4 frames?! 🤪 The same is true for the Star of David and its surrounding circle, but there you at least get a flash animation to justify it. All the overlap is actually quite a good reason for not even attempting to 📝 mess with the hardware color palette instead.


And that's the 4th PC-98 Touhou boss decompiled, 27 to go… but wait, all these quirks, and I still got nothing about the one actual crash that can appear in regular gameplay? There has even been a recent video about it. The cause has to be in Elis' main function, after entering the defeat branch and before the blocking white-out animation. It can't be anywhere else other than in the 📝 central line blitting and unblitting function, called from 📝 that one broken laser reset+unblit function, because everything else in that branch looks fine… and I think we can rule out a crash in MDRV2's non-blocking fade-out call. That's going to need some extra research, and a 5th push added on top of this delivery.

Reproducing the crash was the whole challenge here. Even after moving Elis and Reimu to the exact positions seen in Pearl's video and setting Elis' HP to 0 on the exact same frame, everything ran fine for me. It's definitely no division by 0 this time, the function perfectly guards against that possibility. The line specified in the function's parameters is always clipped to the VRAM region as well, so we can also rule out illegal memory accesses here…

… or can we? Stepping through it all reminded me of how this function brings unblitting sloppiness to the next level: For each VRAM byte touched, ZUN actually unblits the 4 surrounding bytes, adding one byte to the left and two bytes to the right, and using a single 32-bit read and write per bitplane. So what happens if the function tries to unblit the topmost byte of VRAM, covering the pixel positions from (0, 0) to (7, 0) inclusive? The VRAM offset of 0x0000 is decremented to 0xFFFF to cover the one byte to the left, 4 bytes are written to this address, the CPU's internal offset overflows… and as it turns out, that is illegal even in Real Mode as of the 80286, and will raise a General Protection Fault. Which is… ignored by DOSBox-X, every Neko Project II version in common use, the CSCP emulators, SL9821, and T98-Next. Only Anex86 accurately emulates the behavior of real hardware here.

OK, but no laser fired by Elis ever reaches the top-left corner of the screen. How can such a fault even happen in practice? That's where the broken laser reset+unblit function comes in: Not only does it just flat out pass the wrong parameters to the line unblitting function – describing the line already traveled by the laser and stopping where the laser begins – but it also passes them wrongly, in the form of raw 32-bit fixed-point Q24.8 values, with no conversion other than a truncation to the signed 16-bit pixels expected by the function. What then follows is an attempt at interpolation and clipping to find a line segment between those garbage coordinates that actually falls within the boundaries of VRAM:

  1. right/bottom correspond to a laser's origin position, and left/top to the leftmost pixel of its moved-out top line. The bug therefore only occurs with lasers that stopped growing and have started moving.
  2. Moreover, it will only happen if either (left % 256) or (right % 256) is ≤ 127 and the other one of the two is ≥ 128. The typecast to signed 16-bit integers then turns the former into a large positive value and the latter into a large negative value, triggering the function's clipping code.
  3. The function then follows Bresenham's algorithm: left is ensured to be smaller than right by swapping the two values if necessary. If that happened, top and bottom are also swapped, regardless of their value – the algorithm does not care about their order.
  4. The slope in the X dimension is calculated using an integer division of ((bottom - top) / (right - left)). Both subtractions are done on signed 16-bit integers, and overflow accordingly.
  5. (-left × slope_x) is added to top, and left is set to 0.
  6. If both top and bottom are < 0 or ≥ 640, there's nothing to be unblitted. Otherwise, the final coordinates are clipped to the VRAM range of [(0, 0), (639, 399)].
  7. If the function got this far, the line to be unblitted is now very likely to reach from
    1. the top-left to the bottom-right corner, starting out at (0, 0) right away, or
    2. from the bottom-left corner to the top-right corner. In this case, you'd expect unblitting to end at (639, 0), but thanks to an off-by-one error, it actually ends at (640, -1), which is equivalent to (0, 0). Why add clipping to VRAM offset calculations when everything else is clipped already, right? :godzun:
Possible laser states that will cause the fault, with some debug output to help understand the cause, and any pellets removed for better readability. This can happen for all bosses that can potentially have shootout lasers on screen when being defeated, so it also applies to Mima. Fixing this is easier than understanding why it happens, but since y'all love reading this stuff…

tl;dr: TH01 has a high chance of freezing at a boss defeat sequence if there are diagonally moving lasers on screen, and if your PC-98 system raises a General Protection Fault on a 4-byte write to offset 0xFFFF, and if you don't run a TSR with an INT 0Dh handler that might handle this fault differently.

The easiest fix option would be to just remove the attempted laser unblitting entirely, but that would also have an impact on this game's… distinctive visual glitches, in addition to touching a whole lot of code bytes. If I ever get funded to work on a hypothetical TH01 Anniversary Edition that completely rearchitects the game to fix all these glitches, it would be appropriate there, but not for something that purports to be the original game.

(Sidenote to further hype up this Anniversary Edition idea for PC-98 hardware owners: With the amount of performance left on the table at every corner of this game, I'm pretty confident that we can get it to work decently on PC-98 models with just an 80286 CPU.)

Since we're in critical infrastructure territory once again, I went for the most conservative fix with the least impact on the binary: Simply changing any VRAM offsets >= 0xFFFD to 0x0000 to avoid the GPF, and leaving all other bugs in place. Sure, it's rather lazy and "incorrect"; the function still unblits a 32-pixel block there, but adding a special case for blitting 24 pixels would add way too much code. And seriously, it's not like anything happens in the 8 pixels between (24, 0) and (31, 0) inclusive during gameplay to begin with. To balance out the additional per-row if() branch, I inlined the VRAM page change I/O, saving two function calls and one memory write per unblitted row.

That means it's time for a new community_choice_fixes build, containing the new definitive bugfixed versions of these games: 2022-05-31-community-choice-fixes.zip Check the th01_critical_fixes branch for the modified TH01 code. It also contains a fix for the HP bar heap corruption in test or debug mode – simply changing the == comparison to <= is enough to avoid it, and negative HP will still create aesthetic glitch art.


Once again, I then was left with ½ of a push, which I finally filled with some FUUIN.EXE code, specifically the verdict screen. The most interesting part here is the player title calculation, which is quite sneaky: There are only 6 skill levels, but three groups of titles for each level, and the title you'll see is picked from a random group. It looks like this is the first time anyone has documented the calculation?
As for the levels, ZUN definitely didn't expect players to do particularly well. With a 1cc being the standard goal for completing a Touhou game, it's especially funny how TH01 expects you to continue a lot: The code has branches for up to 21 continues, and the on-screen table explicitly leaves room for 3 digits worth of continues per 5-stage scene. Heck, these counts are even stored in 32-bit long variables.

Next up: 📝 Finally finishing the long overdue Touhou Patch Center MediaWiki update work, while continuing with Kikuri in the meantime. Originally I wasn't sure about what to do between Elis and Seihou, but with Ember2528's surprise contribution last week, y'all have demonstrated more than enough interest in the idea of getting TH01 done sooner rather than later. And I agree – after all, we've got the 25th anniversary of its first public release coming up on August 15, and I might still manage to completely decompile this game by that point…

📝 Posted:
🚚 Summary of:
P0174, P0175, P0176, P0177, P0178, P0179, P0180, P0181
Commits:
27f901c...a0fe812, a0fe812...40ac9a7, 40ac9a7...c5dc45b, c5dc45b...5f0cabc, 5f0cabc...60621f8, 60621f8...9e5b344, 9e5b344...091f19f, 091f19f...313450f
💰 Funded by:
Ember2528, Yanga
🏷 Tags:

Here we go, TH01 Sariel! This is the single biggest boss fight in all of PC-98 Touhou: If we include all custom effect code we previously decompiled, it amounts to a total of 10.31% of all code in TH01 (and 3.14% overall). These 8 pushes cover the final 8.10% (or 2.47% overall), and are likely to be the single biggest delivery this project will ever see. Considering that I only managed to decompile 6.00% across all games in 2021, 2022 is already off to a much better start!

So, how can Sariel's code be that large? Well, we've got:

In total, it's just under 3,000 lines of C++ code, containing a total of 8 definite ZUN bugs, 3 of them being subpixel/pixel confusions. That might not look all too bad if you compare it to the 📝 player control function's 8 bugs in 900 lines of code, but given that Konngara had 0… (Edit (2022-07-17): Konngara contains two bugs after all: A 📝 possible heap corruption in test or debug mode, and the infamous 📝 temporary green discoloration.) And no, the code doesn't make it obvious whether ZUN coded Konngara or Sariel first; there's just as much evidence for either.

Some terminology before we start: Sariel's first form is separated into four phases, indicated by different background images, that cycle until Sariel's HP reach 0 and the second, single-phase form starts. The danmaku patterns within each phase are also on a cycle, and the game picks a random but limited number of patterns per phase before transitioning to the next one. The fight always starts at pattern 1 of phase 1 (the random purple lasers), and each new phase also starts at its respective first pattern.


Sariel's bugs already start at the graphics asset level, before any code gets to run. Some of the patterns include a wand raise animation, which is stored in BOSS6_2.BOS:

TH01 BOSS6_2.BOS
Umm… OK? The same sprite twice, just with slightly different colors? So how is the wand lowered again?

The "lowered wand" sprite is missing in this file simply because it's captured from the regular background image in VRAM, at the beginning of the fight and after every background transition. What I previously thought to be 📝 background storage code has therefore a different meaning in Sariel's case. Since this captured sprite is fully opaque, it will reset the entire 128×128 wand area… wait, 128×128, rather than 96×96? Yup, this lowered sprite is larger than necessary, wasting 1,967 bytes of conventional memory.
That still doesn't quite explain the second sprite in BOSS6_2.BOS though. Turns out that the black part is indeed meant to unblit the purple reflection (?) in the first sprite. But… that's not how you would correctly unblit that?

VRAM after blitting the first sprite of TH01's BOSS6_2.BOS VRAM after blitting the second sprite of TH01's BOSS6_2.BOS

The first sprite already eats up part of the red HUD line, and the second one additionally fails to recover the seal pixels underneath, leaving a nice little black hole and some stray purple pixels until the next background transition. :tannedcirno: Quite ironic given that both sprites do include the right part of the seal, which isn't even part of the animation.


Just like Konngara, Sariel continues the approach of using a single function per danmaku pattern or custom entity. While I appreciate that this allows all pattern- and entity-specific state to be scoped locally to that one function, it quickly gets ugly as soon as such a function has to do more than one thing.
The "bird function" is particularly awful here: It's just one if(…) {…} else if(…) {…} else if(…) {…} chain with different branches for the subfunction parameter, with zero shared code between any of these branches. It also uses 64-bit floating-point double as its subpixel type… and since it also takes four of those as parameters (y'know, just in case the "spawn new bird" subfunction is called), every call site has to also push four double values onto the stack. Thanks to Turbo C++ even using the FPU for pushing a 0.0 constant, we have already reached maximum floating-point decadence before even having seen a single danmaku pattern. Why decadence? Every possible spawn position and velocity in both bird patterns just uses pixel resolution, with no fractional component in sight. And there goes another 720 bytes of conventional memory.

Speaking about bird patterns, the red-bird one is where we find the first code-level ZUN bug: The spawn cross circle sprite suddenly disappears after it finished spawning all the bird eggs. How can we tell it's a bug? Because there is code to smoothly fly this sprite off the playfield, that code just suddenly forgets that the sprite's position is stored in Q12.4 subpixels, and treats it as raw screen pixels instead. :zunpet: As a result, the well-intentioned 640×400 screen-space clipping rectangle effectively shrinks to 38×23 pixels in the top-left corner of the screen. Which the sprite is always outside of, and thus never rendered again.
The intended animation is easily restored though:

Sariel's third pattern, and the first to spawn birds, in its original and fixed versions. Note that I somewhat fixed the bird hatch animation as well: ZUN's code never unblits any frame of animation there, and simply blits every new one on top of the previous one.

Also, did you know that birds actually have a quite unfair 14×38-pixel hitbox? Not that you'd ever collide with them in any of the patterns…

Another 3 of the 8 bugs can be found in the symmetric, interlaced spawn rays used in three of the patterns, and the 32×32 debris "sprites" shown at their endpoint, at the edge of the screen. You kinda have to commend ZUN's attention to detail here, and how he wrote a lot of code for those few rapidly animated pixels that you most likely don't even notice, especially with all the other wrong pixels resulting from rendering glitches. One of the bugs in the very final pattern of phase 4 even turns them into the vortex sprites from the second pattern in phase 1 during the first 5 frames of the first time the pattern is active, and I had to single-step the blitting calls to verify it.
It certainly was annoying how much time I spent making sense of these bugs, and all weird blitting offsets, for just a few pixels… Let's look at something more wholesome, shall we?


So far, we've only seen the PC-98 GRCG being used in RMW (read-modify-write) mode, which I previously 📝 explained in the context of TH01's red-white HP pattern. The second of its three modes, TCR (Tile Compare Read), affects VRAM reads rather than writes, and performs "color extraction" across all 4 bitplanes: Instead of returning raw 1bpp data from one plane, a VRAM read will instead return a bitmask, with a 1 bit at every pixel whose full 4-bit color exactly matches the color at that offset in the GRCG's tile register, and 0 everywhere else. Sariel uses this mode to make sure that the 2×2 particles and the wind effect are only blitted on top of "air color" pixels, with other parts of the background behaving like a mask. The algorithm:

  1. Set the GRCG to TCR mode, and all 8 tile register dots to the air color
  2. Read N bits from the target VRAM position to obtain an N-bit mask where all 1 bits indicate air color pixels at the respective position
  3. AND that mask with the alpha plane of the sprite to be drawn, shifted to the correct start bit within the 8-pixel VRAM byte
  4. Set the GRCG to RMW mode, and all 8 tile register dots to the color that should be drawn
  5. Write the previously obtained bitmask to the same position in VRAM

Quite clever how the extracted colors double as a secondary alpha plane, making for another well-earned good-code tag. The wind effect really doesn't deserve it, though:

As far as I can tell, ZUN didn't use TCR mode anywhere else in PC-98 Touhou. Tune in again later during a TH04 or TH05 push to learn about TDW, the final GRCG mode!


Speaking about the 2×2 particle systems, why do we need three of them? Their only observable difference lies in the way they move their particles:

  1. Up or down in a straight line (used in phases 4 and 2, respectively)
  2. Left or right in a straight line (used in the second form)
  3. Left and right in a sinusoidal motion (used in phase 3, the "dark orange" one)

Out of all possible formats ZUN could have used for storing the positions and velocities of individual particles, he chose a) 64-bit / double-precision floating-point, and b) raw screen pixels. Want to take a guess at which data type is used for which particle system?

If you picked double for 1) and 2), and raw screen pixels for 3), you are of course correct! :godzun: Not that I'm implying that it should have been the other way round – screen pixels would have perfectly fit all three systems use cases, as all 16-bit coordinates are extended to 32 bits for trigonometric calculations anyway. That's what, another 1.080 bytes of wasted conventional memory? And that's even calculated while keeping the current architecture, which allocates space for 3×30 particles as part of the game's global data, although only one of the three particle systems is active at any given time.

That's it for the first form, time to put on "Civilization of Magic"! Or "死なばもろとも"? Or "Theme of 地獄めくり"? Or whatever SYUGEN is supposed to mean…


… and the code of these final patterns comes out roughly as exciting as their in-game impact. With the big exception of the very final "swaying leaves" pattern: After 📝 Q4.4, 📝 Q28.4, 📝 Q24.8, and double variables, this pattern uses… decimal subpixels? Like, multiplying the number by 10, and using the decimal one's digit to represent the fractional part? Well, sure, if you really insist on moving the leaves in cleanly represented integer multiples of ⅒, which is infamously impossible in IEEE 754. Aside from aesthetic reasons, it only really combines less precision (10 possible fractions rather than the usual 16) with the inferior performance of having to use integer divisions and multiplications rather than simple bit shifts. And it's surely not because the leaf sprites needed an extended integer value range of [-3276, +3276], compared to Q12.4's [-2047, +2048]: They are clipped to 640×400 screen space anyway, and are removed as soon as they leave this area.

This pattern also contains the second bug in the "subpixel/pixel confusion hiding an entire animation" category, causing all of BOSS6GR4.GRC to effectively become unused:

The "swaying leaves" pattern. ZUN intended a splash animation to be shown once each leaf "spark" reaches the top of the playfield, which is never displayed in the original game.

At least their hitboxes are what you would expect, exactly covering the 30×30 pixels of Reimu's sprite. Both animation fixes are available on the th01_sariel_fixes branch.

After all that, Sariel's main function turned out fairly unspectacular, just putting everything together and adding some shake, transition, and color pulse effects with a bunch of unnecessary hardware palette changes. There is one reference to a missing BOSS6.GRP file during the first→second form transition, suggesting that Sariel originally had a separate "first form defeat" graphic, before it was replaced with just the shaking effect in the final game.
Speaking about the transition code, it is kind of funny how the… um, imperative and concrete nature of TH01 leads to these 2×24 lines of straight-line code. They kind of look like ZUN rattling off a laundry list of subsystems and raw variables to be reinitialized, making damn sure to not forget anything.


Whew! Second PC-98 Touhou boss completely decompiled, 29 to go, and they'll only get easier from here! 🎉 The next one in line, Elis, is somewhere between Konngara and Sariel as far as x86 instruction count is concerned, so that'll need to wait for some additional funding. Next up, therefore: Looking at a thing in TH03's main game code – really, I have little idea what it will be!

Now that the store is open again, also check out the 📝 updated RE progress overview I've posted together with this one. In addition to more RE, you can now also directly order a variety of mods; all of these are further explained in the order form itself.

📝 Posted:
🚚 Summary of:
P0162, P0163, P0164
Commits:
81dd96e...24b3a0d, 24b3a0d...6d572b3, 6d572b3...7a0e5d8
💰 Funded by:
Ember2528, Yanga
🏷 Tags:

No technical obstacles for once! Just pure overcomplicated ZUN code. Unlike 📝 Konngara's main function, the main TH01 player function was every bit as difficult to decompile as you would expect from its size.

With TH01 using both separate left- and right-facing sprites for all of Reimu's moves and separate classes for Reimu's 32×32 and 48×* sprites, we're already off to a bad start. Sure, sprite mirroring is minimally more involved on PC-98, as the planar nature of VRAM requires the bits within an 8-pixel byte to also be mirrored, in addition to writing the sprite bytes from right to left. TH03 uses a 256-byte lookup table for this, generated at runtime by an infamous micro-optimized and undecompilable ASM algorithm. With TH01's existing architecture, ZUN would have then needed to write 3 additional blitting functions. But instead, he chose to waste a total of 26,112 bytes of memory on pre-mirrored sprites… :godzun:

Alright, but surely selecting those sprites from code is no big deal? Just store the direction Reimu is facing in, and then add some branches to the rendering code. And there is in fact a variable for Reimu's direction… during regular arrow-key movement, and another one while shooting and sliding, and a third as part of the special attack types, launched out of a slide.
Well, OK, technically, the last two are the same variable. But that's even worse, because it means that ZUN stores two distinct enums at the same place in memory: Shooting and sliding uses 1 for left, 2 for right, and 3 for the "invalid" direction of holding both, while the special attack types indicate the direction in their lowest bit, with 0 for right and 1 for left. I decompiled the latter as bitflags, but in ZUN's code, each of the 8 permutations is handled as a distinct type, with copy-pasted and adapted code… :zunpet: The interpretation of this two-enum "sub-mode" union variable is controlled by yet another "mode" variable… and unsurprisingly, two of the bugs in this function relate to the sub-mode variable being interpreted incorrectly.

Also, "rendering code"? This one big function basically consists of separate unblit→update→render code snippets for every state and direction Reimu can be in (moving, shooting, swinging, sliding, special-attacking, and bombing), pasted together into a tangled mess of nested if(…) statements. While a lot of the code is copy-pasted, there are still a number of inconsistencies that defeat the point of my usual refactoring treatment. After all, with a total of 85 conditional branches, anything more than I did would have just obscured the control flow too badly, making it even harder to understand what's going on.
In the end, I spotted a total of 8 bugs in this function, all of which leave Reimu invisible for one or more frames:

Thanks to the last one, Reimu's first swing animation frame is never actually rendered. So whenever someone complains about TH01 sprite flickering on an emulator: That emulator is accurate, it's the game that's poorly written. :tannedcirno:

And guess what, this function doesn't even contain everything you'd associate with per-frame player behavior. While it does handle Yin-Yang Orb repulsion as part of slides and special attacks, it does not handle the actual player/Orb collision that results in lives being lost. The funny thing about this: These two things are done in the same function… :onricdennat:

Therefore, the life loss animation is also part of another function. This is where we find the final glitch in this 3-push series: Before the 16-frame shake, this function only unblits a 32×32 area around Reimu's center point, even though it's possible to lose a life during the non-deflecting part of a 48×48-pixel animation. In that case, the extra pixels will just stay on screen during the shake. They are unblitted afterwards though, which suggests that ZUN was at least somewhat aware of the issue?
Finally, the chance to see the alternate life loss sprite Alternate TH01 life loss sprite is exactly ⅛.


As for any new insights into game mechanics… you know what? I'm just not going to write anything, and leave you with this flowchart instead. Here's the definitive guide on how to control Reimu in TH01 we've been waiting for 24 years:

(SVG download)

Pellets are deflected during all gray states. Not shown is the obvious "double-tap Z and X" transition from all non-(#1) states to the Bomb state, but that would have made this diagram even more unwieldy than it turned out. And yes, you can shoot twice as fast while moving left or right.

While I'm at it, here are two more animations from MIKO.PTN which aren't referenced by any code:

An unused animation from TH01's MIKO.PTNAn unused animation from TH01's MIKO.PTN

With that monster of a function taken care of, we've only got boss sprite animation as the final blocker of uninterrupted Sariel progress. Due to some unfavorable code layout in the Mima segment though, I'll need to spend a bit more time with some of the features used there. Next up: The missile bullets used in the Mima and YuugenMagan fights.