And we're back to PC-98 Touhou for a brief interruption of the ongoing Shuusou Gyoku Linux port.
Let's clear some of the Touhou-related progress from the backlog, and use
the unconstrained nature of these contributions to prepare the
📝 upcoming non-ASCII translations commissioned by Touhou Patch Center.
The current budget won't cover all of my ambitions, but it would at least be
nice if all text in these games was feasibly translatable by the time I
officially start working on that project.
At a little over 3 pushes, it might be surprising to see that this took
longer than the
📝 TH03/TH04/TH05 cutscene system. It's
obvious that TH02 started out with a different system for in-game dialog,
but while TH04 and TH05 look identical on the surface, they only
actually share 30% of their dialog code. So this felt more like decompiling
2.4 distinct systems, as opposed to one identical base with tons of
game-specific differences on top.
The table of contents was pretty popular last time around, so let's have
another one:
Let's start with the ones from TH04 and TH05, since they are not that
broken. For TH04, ZUN started out by copy-pasting the cutscene system,
causing the result to inherit many of the caveats I already described in the
cutscene blog post:
It's still a plaintext format geared exclusively toward full-width
Japanese text.
The parser still ignores all whitespace, forcing ASCII text into hacks
with unassigned Shift-JIS lead bytes outside the second byte of a 2-byte
chunk.
Commands are still preceded by a 0x5C byte, which renders
as either a \ or a ¥ depending on your font and
interpretation of Shift-JIS.
Command parameters are parsed in exactly the same way, with all the same
limits.
A lot of the same script commands are identical, including 7 of them
that were not used in TH04's original dialog scripts.
Then, however, he greatly simplified the system. Mainly, this was done by
moving text rendering from the PC-98 graphics chip to the text chip, which
avoids the need for any text-related unblitting code, but ZUN also added a
bunch of smaller changes:
The player must advance through every dialog box by releasing any held
keys and then pressing any key mapped to a game action. There are no
timeouts.
The delay for every 2 bytes of text was doubled to 2 frames, and can't
be overridden.
Instead of holding ESC to fast-forward, pressing any key
will immediately print the entire rest of a text box.
Dialogs run in their own single-buffered frame loop, interrupting the
rest of the game. The other VRAM page keeps the background pixels required
for unblitting the face images.
All script commands that affect the graphics layer are preceded by a
1-frame delay. ZUN most likely did this because of the single-buffered
nature, as it prevents tearing on the first frame by waiting for the CRT
beam to return to the top-left corner before changing any pixels.
Both boxes are intended to contain up to 30 half-width characters on
each of their up to 3 lines, but nothing in the code enforces these limits.
There is no support for automatic line breaks or starting new boxes.
TH05 then moved from TH04's plaintext scripts to the binary
.TX2 format while removing all the unused commands copy-pasted
from the cutscene system. Except for a
single additional command intended to clear a text box, TH05's dialog
system only supports a strict subset of the features of TH04's system.
This change also introduced the following differences compared to TH04:
The game now stores the dialog of all 4 playable characters in the same
file, with a (4 + 1)-word header that indicates the byte offset
and length of each character's script. This way, it can load only the one
script for the currently played character.
Since there is no need for whitespace in a binary format, you can now
use ASCII 0x20 spaces even as the first byte of a 2-byte text
chunk! 🥳
All command parameters are now mandatory.
Filenames are now passed directly by pointer to the respective game
function. Therefore, they now need to be null-terminated, but can in turn be
as long as
📝 the number of remaining bytes in the allocated dialog segment.
In practice though, the game still runs on DOS and shares its restriction of
8.3 filenames…
When starting a new dialog box, any existing text in the other box is
now colored blue.
Thanks to ZUN messing up the return values of the command-interpreting
switch function, you can effectively use only line break and gaiji commands in the middle of text. All other
commands do execute, but the interpreter then also treats their command byte
as a Shift-JIS lead byte and places it in text RAM together with whatever
other byte follows in the script.
This is why TH04 can and does put its \= commandsinto the boxes
started with the 0 or 1 commands, but TH05 has to
put its 0x02 commands before the equivalent 0x0D.
For modding these files, you probably want to use TXDEF from
-Tom-'s MysticTK. It decodes these
files into a text representation, and its encoder then takes care of the
character-specific byte offsets in the 10-byte header. This text
representation simplifies the format a lot by avoiding all corner cases and
landmines you'd experience during hex-editing – most notably by interpreting
the box-starting 0x0D as a
command to show text that takes a string parameter, avoiding the broken
calls to script commands in the middle of text. However, you'd still have to
manually ensure an even number of bytes on every line of text.
In the entry function of TH05's dialog loop, we also encounter the hack that
is responsible for properly handling
📝 ZUN's hidden Extra Stage replay. Since the
dialog loop doesn't access the replay inputs but still requires key presses
to advance through the boxes, ZUN chose to just skip the dialog altogether in the
specific case of the Extra Stage replay being active, and replicated all
sprite management commands from the dialog script by just hardcoding
them.
And you know what? Not only do I not mind this hack, but I would have
preferred it over the actual dialog system! The aforementioned sprite
management commands effectively boil down to manual memory management,
deallocating all stage enemy and midboss sprites and thus ensuring that the
boss sprites end up at specific master.lib sprite IDs (patnums). The
hardcoded boss rendering function then expects these sprites to be available
at these exact IDs… which means that the otherwise hardcoded bosses can't
render properly without the dialog script running before them.
There is absolutely no excuse for the game to burden dialog scripts with
this functionality. Sure, delayed deallocation would allow them to blit
stage-specific sprites, but the original games don't do that; probably
because none of the two games feature an unblitting command. And even if
they did, it would have still been cleaner to expose the boss-specific
sprite setup as a single script command that can then also be called from
game code if the script didn't do so. Commands like these just are a recipe
for crashes, especially with parsers that expect fullwidth Shift-JIS
text and where misaligned ASCII text can easily cause these commands to be
skipped.
But then again, it does make for funny screenshot material if you
accidentally the deallocation and then see bosses being turned into stage
enemies:
With all the general details out of the way, here's the command reference:
0 1
0x00 0x01
Selects either the player character (0) or the boss (1) as the
currently speaking character, and moves the cursor to the beginning of
the text box. In TH04, this command also directly starts the new dialog
box, which is probably why it's not prefixed with a \ as it
only makes sense outside of text. TH05 requires a separate 0x0D command to do the
same.
\=1
0x02 0x!!
Replaces the face portrait of the currently active speaking
character with image #1 within her .CD2
file.
\=255
0x02 0xFF
Removes the face portrait from the currently active text box.
\l,filename
0x03 filename 0x00
Calls master.lib's super_entry_bfnt() function, which
loads sprites from a BFNT file to consecutive IDs starting at the
current patnum write cursor.
\c
0x04
Deallocates all stage-specific BFNT sprites (i.e., stage enemies and
midbosses), freeing up conventional RAM for the boss sprites and
ensuring that master.lib's patnum write cursor ends up at
128 /
180.
In TH05's Extra Stage, this command also replaces
📝 the sprites loaded from MIKO16.BFT with the ones from ST06_16.BFT.
\d
Deallocates all face portrait images.
The game automatically does this at the end of each dialog sequence.
However, ZUN wanted to load Stage 6 Yuuka's 76 KiB of additional
animations inside the script via \l, and would have once again
run up against the master.lib heap size limit without that extra free
memory.
\m,filename
0x05 filename 0x00
Stops the currently playing BGM, loads a new one from the given
file, and starts playback.
\m$
0x05 $ 0x00
Stops the currently playing BGM.
Note that TH05 interprets $ as a null-terminated filename as
well.
\m*
Restarts playback of the currently loaded BGM from the
beginning.
\b0,0,0
0x06 0x!!!!0x!!!!0x!!
Blits the master.lib patnum with the ID indicated by the third
parameter to the current VRAM page at the top-left screen position
indicated by the first two parameters.
\e0
Plays the sound effect with the given ID.
\t100
Sets palette brightness via master.lib's
palette_settone() to any value from 0 (fully black) to 200
(fully white). 100 corresponds to the palette's original colors.
\fo1
\fi1
Calls master.lib's palette_black_out() or
palette_black_in() to play a hardware palette fade
animation from or to black, spending roughly 1 frame on each of the 16 fade steps.
\wo1
\wi1
0x09 0x!!
0x0A 0x!!
Calls master.lib's palette_white_out() or
palette_white_in() to play a hardware palette fade
animation from or to white, spending roughly 1 frame on each of the 16 fade steps. The
TH05 version of 0x09 also clears the text in both boxes
before the animation.
\n
0x0B
Starts a new line by resetting the X coordinate of the TRAM cursor
to the left edge of the text area and incrementing the Y coordinate.
The new line will always be the next one below the last one that was
properly started, regardless of whether the text previously wrapped to
the next TRAM row at the edge of the screen.
\g8
Plays a blocking 8-frame screen shake
animation. Copy-pasted from the cutscene parser, but actually used right
at the end of the dialog shown before TH04's Bad Ending.
\ga0
0x0C 0x!!
Shows the gaiji with the given ID from 0 to 255
at the current cursor position, ignoring the per-glyph delay.
\k0
Waits 0 frames (0 = forever) for any key
to be pressed before continuing script execution.
Takes the current dialog cursor as the top-left corner of a
240×48-pixel rectangle, and replaces all text RAM characters within that
rectangle with whitespace.
This is only used to clear the player character's text box before
Shinki's final いくよ‼ box. Shinki has two
consecutive text boxes in all 4 scripts here, and ZUN probably wanted to
clear the otherwise blue text to imply a dramatic pause before Shinki's
final sentence. Nice touch.
(You could, however, also use it after a
box-ending 0xFF command to mess with text RAM in
general.)
\#
Quits the currently running loop. This returns from either the text
loop to the command loop, or it ends the dialog sequence by returning
from the command loop back to gameplay. If this stage of the game later
starts another dialog sequence, it will start at the next script
byte.
\$
Like \#, but first waits for any key to be
pressed.
0xFF
Behaves like TH04's \$ in the text loop, and like
\# in the command loop. Hence, it's not possible in TH05 to
automatically end a text box and advance to the next one without waiting
for a key press.
Unused commands are in gray.
At the end of the day, you might criticize the system for how its landmines
make it annoying to mod in ASCII text, but it all works and does what it's
supposed to. ZUN could have written the cleanest single and central
Shift-JIS iterator that properly chunks a byte buffer into halfwidth and
fullwidth codepoints, and I'd still be throwing it out for the upcoming
non-ASCII translations in favor of something that either also supports UTF-8
or performs dictionary lookups with a full box of text.
The only actual bug can be found in the input detection, which once
again doesn't correctly handle the infamous key
up/key down scancode quirk of PC-98 keyboards. All it takes
is one wrongly placed input polling call, and suddenly you have to think
about how the update cycle behind the PC-98 keyboard state bytes
might cause the game to run the regular 2-frame delay for a single
2-byte chunk of text before it shows the full text of a box after
all… But even this bug is highly theoretical and could probably only be
observed very, very rarely, and exclusively on real hardware.
The same can't be said about TH02 though, but more on that later. Let's
first take a look at its data, which started out much simpler in that game.
The STAGE?.TXT files contain just raw Shift-JIS text with no
trace of commands or structure. Turning on the whitespace display feature in
your editor reveals how the dialog system even assumes a fixed byte
length for each box: 36 bytes per line which will appear on screen, followed
by 4 bytes of padding, which the original files conveniently use to visually
split the lines via a CR/LF newline sequence. Make sure to disable trimming
of trailing whitespace in your editor to not ruin the file when modding the
text…
Consequently, everything else is hardcoded – every effect shown between text
boxes, the face portrait shown for each box, and even how many boxes are
part of each dialog sequence. Which means that the source code now contains
a
long hardcoded list of face IDs for most of the text boxes in the game,
with the rest being part of the
dedicated hardcoded dialog scripts for 2/3 of the
game's stages.
Without the restriction to a fixed set of scripting commands, TH02 naturally
gravitated to having the most varied dialog sequences of all PC-98 Touhou
games. This flexibility certainly facilitated Mima's grand entrance
animation in Stage 4, or the different lines in Stage 4 and 5 depending on
whether you already used a continue or not. Marisa's post-boss dialog even
inserts the number of continues into the text itself – by, you guessed it,
writing to hardcoded byte offsets inside the dialog text before printing it
to the screen. But once again, I have nothing to
criticize here – not even the fact that the alternate dialog scripts have to
mutate the "box cursor" to jump to the intended boxes within the file. I
know that some people in my audience like VMs, but I would have considered
it more bloated if ZUN had implemented a full-blown scripting
language just to handle all these special cases.
Another unique aspect of TH02 is the way it stores its face portraits, which
are infamous for how hard they are to find in the original data files. These
sprites are actually map tiles, stored in MIKO_K.MPN,
and drawn using the same functions used to blit the regular map tiles to the
📝 tile source area in VRAM. We can only guess
why ZUN chose this one out of the three graphics formats he used in TH02:
BFNT supports transparency, but sacrifices one of the 16 colors to do
so. ZUN only used 15 colors for the face portraits, but might have wanted to
keep open the option to use that 16th color. The detailed
backgrounds also suggest that these images were never supposed to be
transparent to begin with.
PI is used for all bigger and non-transparent images, but ZUN would have
had to write a separate small function to blit a 48×48 subsection of such an
image. That certainly wouldn't have stopped him in the TH01 days, but he
probably was already past that point by this game.
That only leaves .MPN. Sure, he did have to slice each face into 9
separate 16×16 "map" tiles to use this format, but that's a small price to
pay in exchange for not having to write any new low-level blitting code,
especially since he must have already had an asset pipeline to generate
these files.
And since you're certainly wondering about all these black tiles at the
edges: Yes, these are not only part of the file and pad it from the required
240×192 pixels to 256×256, but also kept in memory during a stage, wasting
9.5 KiB of conventional RAM. That's 172 seconds of potential input
replay data, just for those people who might still think that we need EMS
for replays.
Alright, we've got the text, we've got the faces, let's slide in the box and
display it all on screen. Apparently though, we also have to blit the player
and option sprites using raw, low-level master.lib function calls in the
process? This can't be right, especially because ZUN
always blits the option sprite associated with the Reimu-A shot type,
regardless of which one the player actually selected. And if you keep moving
above the box area before the dialog starts, you get to see exactly how
wrong this is:
Let's look closer at Reimu's sprite during the slide-in animation, and in
the two frames before:
This one image shows off no less than 4 bugs:
ZUN blits the stationary player sprite here, regardless of whether the
player was previously moving left or right. This is a nice way of indicating
that Reimu stops moving once the dialog starts, but maybe ZUN should
have unblitted the old sprite so that the new one wouldn't have appeared on
top. The game only unblits the 384×64 pixels covered by the dialog box on
every frame of the slide-in animation, so Reimu would only appear correctly
if her sprite happened to be entirely located within that area.
All sprites are shifted up by 1 pixel in frame 2️⃣. This one is not a
bug in the dialog system, but in the main game loop. The game runs the
relevant actions in the following order:
Invalidate any map tiles covered by entities
Redraw invalidated tiles
Decrement the Y coordinate at the top of VRAM according to the
scroll speed
Update and render all game entities
Scroll in new tiles as necessary according to the scroll speed, and
report whether the game has scrolled one pixel past the end of the
map
If that happened, pretend it didn't by incrementing the value
calculated in #3 for all further frames and skipping to
#8.
Issue a GDC SCROLL command to reflect the line
calculated in #3 on the display
Wait for VSync
Flip VRAM pages
Start boss if we're past the end of the map
The problem here: Once the dialog starts, the game has already rendered
an entire new frame, with all sprites being offset by a new Y scroll
offset, without adjusting the graphics GDC's scroll registers to
compensate. Hence, the Y position in 3️⃣ is the correct one, and the
whole existence of frame 2️⃣ is a bug in itself. (Well… OK, probably a
quirk because speedrunning exists, and it would be pretty annoying to
synchronize any video regression tests of the future TH02 Anniversary
Edition if it renders one fewer frame in the middle of a stage.)
ZUN blits the option sprites to their position from frame 1️⃣. This
brings us back to
📝 TH02's special way of retaining the previous and current position in a two-element array, indexed with a VRAM page ID.
Normally, this would be equivalent to using dedicated prev and
cur structure fields and you'd just index it with the back page
for every rendering call. But if you then decide to go single-buffered for
dialogs and render them onto the front page instead…
Note that fixing bug #2 would not cancel out this one – the sprites would
then simply be rendered to their position in the frame before 1️⃣.
And of course, the fixed option sprite ID also counts as a bug.
As for the boxes themselves, it's yet another loop that prints 2-byte chunks
of Shift-JIS text at an even slower fixed interval of 3 frames. In an
interesting quirk though, ZUN assumes that every box starts with the name of
the speaking character in its first two fullwidth Shift-JIS characters,
followed by a fullwidth colon. These 6 bytes are displayed immediately at
the start of every box, without the usual delay. The resulting alignment
looks rather janky with Genjii, whose single right-padded 亀
kanji looks quite awkward with the fullwidth space between the name
and the colon. Kind of makes you wonder why ZUN just didn't spell out his
proper name, 玄爺, instead, but I get the stylistic
difference.
In Stage 4, the two-kanji assumption then breaks with Marisa's three-kanji
name, which causes the full-width colon to be printed as the first delayed
character in each of her boxes:
That's all the issues and quirks in the system itself. The scripts
themselves don't leave much room for bugs as they basically just loop over
the hardcoded face ID array at this level… until we reach the end of the
game. Previously, the slide-in animation could simply use the tile
invalidation and re-rendering system to unblit the box on each frame, which
also explained why Reimu had to be separately rendered on top. But this no
longer works with a custom-rendered boss background, and so the game just
chooses to flood-fill the area with graphics chip color #0:
For Mima's final defeat dialog though, ZUN chose to not even show the box.
He might have realized the issue by that point, or simply preferred the more
dramatic effect this had on the lines. The resulting issues, however, might
even have ramifications for such un-technical things as lore and
character dynamics. As it turns out, the code
for this dialog sequence does in fact render Mima's smiling face for all
boxes?! You only don't see it in the original game because it's rendered to
the other VRAM page that remains invisible during the dialog sequence:
Here's how I interpret the situation:
The function that launches into the final part of the dialog script
starts with dedicated
code to re-render Mima to the back page, on top of the previously
rendered planet background. Since the entire script runs on the front
page (and thus, on top of the previous frame) and the game launches into
the ending immediately after, you don't ever get to see this new partial
frame in the original game.
Showing this partial frame would also ensure that you can actually
read the dialog text without a surrounding box. Then, the white
letters won't ever be put on top of any white bullets – or, worse, be completely invisible if the
dialog is triggered in the middle of Reimu-B's bomb animation, which
fills VRAM with lots of white pixels.
Hence, we've got enough evidence to classify not showing the back page
as a ZUN
bug. 🐞
However, Mima's smiling face jars with the words she says here. Adding
the face would deviate more significantly from the original game than
removing the player shot, item, bullet, or spark sprites would. It's
imaginable that ZUN just forgot about the dedicated code that
re-rendered just Mima to the back page, but the faces add
something to the dialog, and ZUN would have clearly noticed and
fixed it if their absence wasn't intended. Heck, ZUN might have just put
something related to Mima into the code because TH02's dialog system has
no way of not drawing a face for a dialog box. Filling the face
area with graphics chip color #0, as seen in the first and third boxes
of the Extra Stage pre-boss dialog, would have been an alternative, but
that would have been equally wrong with regard to the background.
Hence, the invisible face portrait from the original game is a ZUN
quirk. 🎺
So, the future TH02 Anniversary Edition will fix the bug by showing
the back page, but retain the quirk by rewriting the dialog code to
not blit the face.
And with that, we've secured all in-game dialog for the upcoming non-ASCII
translations! The remaining 2/3 of the last push made
for a good occasion to also decompile the small amount of code related to
TH03's win messages, stored in the @0?TX.TXT files. Similar to
TH02's dialog format, these files are also split into fixed-size blocks of
3×60 bytes. But this time, TH03 loads all 60 bytes of a line, including the
CR/LF line breaking codepoints in the original files, into the statically
allocated buffer that it renders from. These control characters are then
only filtered to whitespace by ZUN's graph_putsa_fx() function.
If you remove the line breaks, you get to use the full 60 bytes on every
line.
The final commits went to the MIKO.CFG loading and saving
functions used in TH04's and TH05's OP.EXE, as well as TH04's
game startup code to finally catch up with
📝 TH05's counterpart from over 3 years ago.
This brought us right in front of the main menu rendering code in both TH04
and TH05, which is identical in both games and will be tackled in the next
PC-98 Touhou delivery.
Next up, though: Returning to Shuusou Gyoku, and adding support for SC-88Pro
recordings as BGM. Which may or may not come with a slight controversy…
🎉 After almost 3 years, TH04 finally caught up to TH05 and is now 100%
position-independent as well! 🎉
For a refresher on what this means and does not mean, check the
announcements from back in 2019 and 2020 when we chased the goal for TH05's
📝 OP.EXE and
📝 the rest of the game. These also feature
some demo videos that show off the kind of mods you were able to efficiently
code back then. With the occasional reverse-engineering attention it
received over the years, TH04's code should now be slightly easier to work
with than TH05's was back in the day. Although not by much – TH04 has
remained relatively unpopular among backers, and only received more than the
funded attention because it shares most of its core code with the more
popular TH05. Which, coincidentally, ended up becoming
📝 the reason for getting this done now.
Not that it matters a lot. Ever since we reached 100% PI for TH05, community
and backer interest in position independence has dropped to near zero. We
just didn't end up seeing the expected large amount of community-made mods
that PI was meant to facilitate, and even the
📝 100% decompilation of TH01 changed nothing
about that. But that's OK; after all, I do appreciate the business of
continually getting commissioned for all the
📝 large-scale mods. Not focusing on PI is
also the correct choice for everyone who likes reading these blog posts, as
it often means that I can't go that much into detail due to cutting corners
and piling up technical debt left and right.
Surprisingly, this only took 1.25 pushes, almost twice as fast as expected.
As that's closer to 1 push than it is to 2, I'm OK with releasing it like
this – especially since it was originally meant to come out three days ago.
🍋 Unfortunately, it was delayed thanks to surprising
website bugs and a certain piece of code that was way more difficult to
document than it was to decompile… The next push will have slightly less
content in exchange, though.
📝 P0240 and P0241 already covered the final
remaining structures, so I only needed to do some superficial RE to prove
the remaining numeric literals as either constants or memory addresses. For
example, I initially thought I'd have to decompile the dissolve animations
in the staff roll, but I only needed to identify a single function pointer
type to prove all false positives as screen coordinates there. Now, the TH04
staff roll would be another fast and cheap decompilation, similar to the
custom entity types of TH04. (And TH05 as well!)
The one piece of code I did have to decompile was Stage 4's carpet
lighting animation, thanks to hex literals that were way too complicated to
leave in ASM. And this one probably takes the crown for TH04's worst set of
landmines and bloat that still somehow results in no observable bugs or
quirks.
This animation starts at frame 1664, roughly 29.5 seconds into the stage,
and quickly turns the stage background into a repeated row of dark-red plaid
carpet tiles by moving out from the center of the playfield towards the
edges. Afterward, the animation repeats with a brighter set of tiles that is
then used for the rest of the stage. As I explained
📝 a while ago in the context of TH02, the
stage tile and map formats in PC-98 Touhou can't express animations, so all
of this needed to be hardcoded in the binary.
And ZUN did start out making the right decision by only using fully-lit
carpet tiles for all tile sections defined in ST03.MAP. This
way, the animation can simply disable itself after it completed, letting the
rest of the stage render normally and use new tile sections that are only
defined for the final light level. This means that the "initial" dark
version of the carpet is as much a result of hardcoded tile manipulation as
the animation itself.
But then, ZUN proceeded to implement it all by directly manipulating the
ring buffer of on-screen tiles. This is the lowest level before the tiles
are rendered, and rather detached from the defined content of the
📝 .MAP tile sections. Which leads to a whole
lot of problems:
If you decide to do this kind of tile ring modification, it should ideally
happen at a very specific point: after scrolling in new tiles into
the ring buffer, but before blitting any scrolled or invalidated
tiles to VRAM based on the ring buffer. Which is not where ZUN chose to put
it, as he placed the call to the stage-specific render function after both
of those operations. By the time the function is
called, the tile renderer has already blitted a few lines of the fully-lit
carpet tiles from the defined .MAP tile section, matching the scroll speed.
Fortunately, these are hidden behind the black TRAM cells above and below
the playfield…
Still, the code needs to get rid of them before they would become visible.
ZUN uses the regular tile invalidation function for this, which will only
cause actual redraws on the next frame. Again, the tile rendering call has
already happened by the time the Stage 4-specific rendering function gets
called.
But wait, this game also flips VRAM pages between frames to provide a
tear-free gameplay experience. This means that the intended redraw of the
new tiles actually hits the wrong VRAM page.
And sure, the code does attempt to invalidate these newly blitted lines
every frame – but only relative to the current VRAM Y coordinate that
represents the top of the hardware-scrolled screen. Once we're back on the
original VRAM page on the next frame, the lines we initially set out to
remove could have already scrolled past that point, making it impossible to
ever catch up with them in this way.
The only real "solution": Defining the height of the tile invalidation
rectangle at 3× the scroll speed, which ensures that each invalidation call
covers 3 frames worth of newly scrolled-in lines. This is not intuitive at
all, and requires an understanding of everything I have just written to even
arrive at this conclusion. Needless to say that ZUN didn't comprehend it
either, and just hardcoded an invalidation height that happened to be enough
for the small scroll speeds defined in ST03.STD for the first
30 seconds of the stage.
The effect must consistently modify the tile ring buffer to "fix" any new
tiles, overriding them with the intended light level. During the animation,
the code not only needs to set the old light level for any tiles that are
still waiting to be replaced, but also the new light level for any tiles
that were replaced – and ZUN forgot the second part. As a result, newly scrolled-in tiles within the already animated
area will "remain" untouched at light level 2 if the scroll speed is fast
enough during the transition from light level 0 to 1.
All that means that we only have to raise the scroll speed for the effect to
fall apart. Let's try, say, 4 pixels per frame rather than the original
0.25:
All of this could have been so much simpler and actually stable if ZUN
applied the tile changes directly onto the .MAP. This is a much more
intuitive way of expressing what is supposed to happen to the map, and would
have reduced the code to the actually necessary tile changes for the first
frame and each individual frame of the animation. It would have still
required a way to force these changes into the tile ring buffer, but ZUN
could have just used his existing full-playfield redraw functions for that.
In any case, there would have been no need for any per-frame tile
fixing and redrawing. The CPU cycles saved this way could have then maybe
been put towards writing the tile-replacing part of the animation in C++
rather than ASM…
Wow, that was an unreasonable amount of research into a feature that
superficially works fine, just because its decompiled code didn't make
sense. To end on a more positive note, here are
some minor new discoveries that might actually matter to someone:
The laser part of Marisa's Illusion Laser shot type always does 3
points of damage per frame, regardless of the player's power level. Its
hitbox also remains identical on all power levels, no matter how wide the
laser appears on screen. The strength difference between the levels purely
comes from the number of frames the laser stays active before a fixed
non-damaging 32-frame cooldown time:
Power level
Frames per cycle (including 32-frame cooldown)
2
64
3
72
4
88
5
104
6
128
7
144
8
168
9
192
The decay animation for player shots is faster in TH05 (12 frames) than in
TH04 (16 frames).
In the first phase of her Stage 6 fight, Yuuka moves along one of two
randomly chosen hardcoded paths, defined as a set of 5 movement angles.
After reaching the final point and firing a danmaku pattern, she teleports
back to her initial position to repeat the path one more time before the
phase times out.
Similarly, TH04's Stage 3 midboss also goes through 12 fixed movement angles
before flying off the playfield.
The formulas for calculating the skill rating on both TH04's and TH05's
final verdict screen are going to be very long and complicated.
Next up: ¾ of a push filled with random boilerplate, finalization, and TH01
code cleanup work, while I finish the preparations for Shuusou Gyoku's
OpenGL backend. This month, everything should finally work out as intended:
I'll complete both tasks in parallel, ship the former to free up the cap,
and then ship the latter once its 5th push is fully funded.
…or maybe not that soon, as it would have only wasted time to
untangle the bullet update commits from the rest of the progress. So,
here's all the bullet spawning code in TH04 and TH05 instead. I hope
you're ready for this, there's a lot to talk about!
(For the sake of readability, "bullets" in this blog post refers to the
white 8×8 pellets
and all 16×16 bullets loaded from MIKO16.BFT, nothing else.)
But first, what was going on📝 in 2020? Spent 4 pushes on the basic types
and constants back then, still ended up confusing a couple of things, and
even getting some wrong. Like how TH05's "bullet slowdown" flag actually
always prevents slowdown and fires bullets at a constant speed
instead. Or how "random spread" is not the
best term to describe that unused bullet group type in TH04.
Or that there are two distinct ways of clearing all bullets on screen,
which deserve different names:
Bullets are zapped at the end of most midboss and boss phases, and
cleared everywhere else – most notably, during bombs, when losing a
life, or as rewards for extends or a maximized Dream bonus. The
Bonus!! points awarded for zapping bullets are calculated iteratively,
so it's not trivial to give an exact formula for these. For a small number
𝑛 of bullets, it would exactly be 5𝑛³ - 10𝑛² + 15𝑛
points – or, using uth05win's (correct) recursive definition,
Bonus(𝑛) = Bonus(𝑛-1) + 15𝑛² - 5𝑛 + 10.
However, one of the internal step variables is capped at a different number
of points for each difficulty (and game), after which the points only
increase linearly. Hence, "semi-exponential".
On to TH04's bullet spawn code then, because that one can at least be
decompiled. And immediately, we have to deal with a pointless distinction
between regular bullets, with either a decelerating or constant
velocity, and special bullets, with preset velocity changes during
their lifetime. That preset has to be set somewhere, so why have
separate functions? In TH04, this separation continues even down to the
lowest level of functions, where values are written into the global bullet
array. TH05 merges those two functions into one, but then goes too far and
uses self-modifying code to save a grand total of two local variables…
Luckily, the rest of its actual code is identical to TH04.
Most of the complexity in bullet spawning comes from the (thankfully
shared) helper function that calculates the velocities of the individual
bullets within a group. Both games handle each group type via a large
switch statement, which is where TH04 shows off another Turbo
C++ 4.0 optimization: If the range of case values is too
sparse to be meaningfully expressed in a jump table, it usually generates a
linear search through a second value table. But with the -G
command-line option, it instead generates branching code for a binary
search through the set of cases. 𝑂(log 𝑛) as the worst case for a
switch statement in a C++ compiler from 1994… that's so cool.
But still, why are the values in TH04's group type enum all
over the place to begin with?
Unfortunately, this optimization is pretty rare in PC-98 Touhou. It only
shows up here and in a few places in TH02, compared to at least 50
switch value tables.
In all of its micro-optimized pointlessness, TH05's undecompilable version
at least fixes some of TH04's redundancy. While it's still not even
optimal, it's at least a decently written piece of ASM…
if you take the time to understand what's going on there, because it
certainly took quite a bit of that to verify that all of the things which
looked like bugs or quirks were in fact correct. And that's how the code
for this function ended up with 35% comments and blank lines before I could
confidently call it "reverse-engineered"…
Oh well, at least it finally fixes a correctness issue from TH01 and TH04,
where an invalid bullet group type would fill all remaining slots in the
bullet array with identical versions of the first bullet.
Something that both games also share in these functions is an over-reliance
on globals for return values or other local state. The most ridiculous
example here: Tuning the speed of a bullet based on rank actually mutates
the global bullet template… which ZUN then works around by adding a wrapper
function around both regular and special bullet spawning, which saves the
base speed before executing that function, and restores it afterward.
Add another set of wrappers to bypass that exact
tuning, and you've expanded your nice 1-function interface to 4 functions.
Oh, and did I mention that TH04 pointlessly duplicates the first set of
wrapper functions for 3 of the 4 difficulties, which can't even be
explained with "debugging reasons"? That's 10 functions then… and probably
explains why I've procrastinated this feature for so long.
At this point, I also finally stopped decompiling ZUN's original ASM just
for the sake of it. All these small TH05 functions would look horribly
unidiomatic, are identical to their decompiled TH04 counterparts anyway,
except for some unique constant… and, in the case of TH05's rank-based
speed tuning function, actually become undecompilable as soon as we
want to return a C++ class to preserve the semantic meaning of the return
value. Mainly, this is because Turbo C++ does not allow register
pseudo-variables like _AX or _AL to be cast into
class types, even if their size matches. Decompiling that function would
have therefore lowered the quality of the rest of the decompiled code, in
exchange for the additional maintenance and compile-time cost of another
translation unit. Not worth it – and for a TH05 port, you'd already have to
decompile all the rest of the bullet spawning code anyway!
The only thing in there that was still somewhat worth being
decompiled was the pre-spawn clipping and collision detection function. Due
to what's probably a micro-optimization mistake, the TH05 version continues
to spawn a bullet even if it was spawned on top of the player. This might
sound like it has a different effect on gameplay… until you realize that
the player got hit in this case and will either lose a life or deathbomb,
both of which will cause all on-screen bullets to be cleared anyway.
So it's at most a visual glitch.
But while we're at it, can we please stop talking about hitboxes? At least
in the context of TH04 and TH05 bullets. The actual collision detection is
described way better as a kill delta of 8×8 pixels between the
center points of the player and a bullet. You can distribute these pixels
to any combination of bullet and player "hitboxes" that make up 8×8. 4×4
around both the player and bullets? 1×1 for bullets, and 8×8 for the
player? All equally valid… or perhaps none of them, once you keep in mind
that other entity types might have different kill deltas. With that in
mind, the concept of a "hitbox" turns into just a confusing abstraction.
The same is true for the 36×44 graze box delta. For some reason,
this one is not exactly around the center of a bullet, but shifted to the
right by 2 pixels. So, a bullet can be grazed up to 20 pixels right of the
player, but only up to 16 pixels left of the player. uth05win also spotted
this… and rotated the deltas clockwise by 90°?!
Which brings us to the bullet updates… for which I still had to
research a decompilation workaround, because
📝 P0148 turned out to not help at all?
Instead, the solution was to lie to the compiler about the true segment
distance of the popup function and declare its signature far
rather than near. This allowed ZUN to save that ridiculous overhead of 1 additional far function
call/return per frame, and those precious 2 bytes in the BSS segment
that he didn't have to spend on a segment value.
📝 Another function that didn't have just a
single declaration in a common header file… really,
📝 how were these games even built???
The function itself is among the longer ones in both games. It especially
stands out in the indentation department, with 7 levels at its most
indented point – and that's the minimum of what's possible without
goto. Only two more notable discoveries there:
Bullets are the only entity affected by Slow Mode. If the number of
bullets on screen is ≥ (24 + (difficulty * 8) + rank) in TH04,
or (42 + (difficulty * 8)) in TH05, Slow Mode reduces the frame
rate by 33%, by waiting for one additional VSync event every two frames.
The code also reveals a second tier, with 50% slowdown for a slightly
higher number of bullets, but that conditional branch can never be executed
Bullets must have been grazed in a previous frame before they can
be collided with. (Note how this does not apply to bullets that spawned
on top of the player, as explained earlier!)
Whew… When did ReC98 turn into a full-on code review?! 😅 And after all
this, we're still not done with TH04 and TH05 bullets, with all the
special movement types still missing. That should be less than one push
though, once we get to it. Next up: Back to TH01 and Konngara! Now have fun
rewriting the Touhou Wiki Gameplay pages 😛
Only one newly ordered push since I've reopened the store? Great, that's
all the justification I needed for the extended maintenance delay that was
part of these two pushes 😛
Having to write comments to explain whether coordinates are relative to
the top-left corner of the screen or the top-left corner of the playfield
has finally become old. So, I introduced
distinct
types for all the coordinate systems we typically encounter, applying
them to all code decompiled so far. Note how the planar nature of PC-98
VRAM meant that X and Y coordinates also had to be different from each
other. On the X side, there's mainly the distinction between the
[0; 640] screen space and the corresponding [0; 80] VRAM byte
space. On the Y side, we also have the [0; 400] screen space, but
the visible area of VRAM might be limited to [0; 200] when running in
the PC-98's line-doubled 640×200 mode. A VRAM Y coordinate also always
implies an added offset for vertical scrolling.
During all of the code reconstruction, these types can only have a
documenting purpose. Turning them into anything more than just
typedefs to int, in order to define conversion
operators between them, simply won't recompile into identical binaries.
Modding and porting projects, however, now have a nice foundation for
doing just that, and can entirely lift coordinate system transformations
into the type system, without having to proofread all the meaningless
int declarations themselves.
So, what was left in terms of memory references? EX-Alice's fire waves
were our final unknown entity that can collide with the player. Decently
implemented, with little to say about them.
That left the bomb animation structures as the one big remaining PI
blocker. They started out nice and simple in TH04, with a small 6-byte
star animation structure used for both Reimu and Marisa. TH05, however,
gave each character her own animation… and what the hell is going
on with Reimu's blue stars there? Nope, not going to figure this out on
ASM level.
A decompilation first required some more bomb-related variables to be
named though. Since this was part of a generic RE push, it made sense to
do this in all 5 games… which then led to nice PI gains in anything
but TH05. Most notably, we now got the
"pulling all items to player" flag in TH04 and TH05, which is
actually separate from bombing. The obvious cheat mod is left as an
exercise to the reader.
So, TH05 bomb animations. Just like the
📝 custom entity types of this game, all 4
characters share the same memory, with the superficially same 10-byte
structure.
But let's just look at the very first field. Seen from a low level, it's a
simple struct { int x, y; } pos, storing the current position
of the character-specific bomb animation entity. But all 4 characters use
this field differently:
For Reimu's blue stars, it's the top-left position of each star, in the
12.4 fixed-point format. But unlike the vast majority of these values in
TH04 and TH05, it's relative to the top-left corner of the
screen, not the playfield. Much better represented as
struct { Subpixel screen_x, screen_y; } topleft.
For Marisa's lasers, it's the center of each circle, as a regular 12.4
fixed-point coordinate, relative to the top-left corner of the playfield.
Much better represented as
struct { Subpixel x, y; } center.
For Mima's shrinking circles, it's the center of each circle in regular
pixel coordinates. Much better represented as
struct { screen_x_t x; screen_y_t y; } center.
For Yuuka's spinning heart, it's the top-left corner in regular pixel
coordinates. Much better represented as
struct { screen_x_t x; screen_y_t y; } topleft.
And yes, singular. The game is actually smart enough to only store a single
heart, and then create the rest of the circle on the fly. (If it were even
smarter, it wouldn't even use this structure member, but oh well.)
Therefore, I decompiled it as 4 separate structures once again, bundled
into an union of arrays.
As for Reimu… yup, that's some pointer arithmetic straight out of
Jigoku* for setting and updating the positions of the falling star
trails. While that certainly required several
comments to wrap my head around the current array positions, the one "bug"
in all this arithmetic luckily has no effect on the game.
There is a small glitch with the growing circles, though. They are
spawned at the end of the loop, with their position taken from the star
pointer… but after that pointer has already been incremented. On
the last loop iteration, this leads to an out-of-bounds structure access,
with the position taken from some unknown EX-Alice data, which is 0 during
most of the game. If you look at the animation, you can easily spot these
bugged circles, consistently growing from the top-left corner (0, 0)
of the playfield:
After all that, there was barely enough remaining time to filter out and
label the final few memory references. But now, TH05's
MAIN.EXE is technically position-independent! 🎉
-Tom- is going to work on a pretty extensive demo of this
unprecedented level of efficient Touhou game modding. For a more impactful
effect of both the 100% PI mark and that demo, I'll be delaying the push
covering the remaining false positives in that binary until that demo is
done. I've accumulated a pretty huge backlog of minor maintenance issues
by now…
Next up though: The first part of the long-awaited build system
improvements. I've finally come up with a way of sanely accelerating the
32-bit build part on most setups you could possibly want to build ReC98
on, without making the building experience worse for the other few setups.