⮜ Blog

⮜ List of tags

Showing all posts tagged
,
and

📝 Posted:
🚚 Summary of:
P0214, P0215
Commits:
158a91e...414770c, 414770c...3123c9d
💰 Funded by:
Ember2528, Yanga
🏷 Tags:

Last blog post before the 100% completion of TH01! The final parts of REIIDEN.EXE would feel rather out of place in a celebratory blog post, after all. They provided quite a neat summary of the typical technical details that are wrong with this game, and that I now get to mention for one final time:

But hey, there's an error message if you start REIIDEN.EXE without a resident MDRV2 or a correctly prepared resident structure! And even a good, user-friendly one, asking the user to launch the batch file instead. For some reason, this convenience went out of fashion in the later games.


The Game Over animation (how fitting) gives us TH01's final piece of weird sprite blitting code, which seriously manages to include 2 bugs and 3 quirks in under 50 lines of code. In test mode (game t or game d), you can trigger this effect by pressing the ⬇️ down arrow key, which certainly explains why I encountered seemingly random Game Over events during all the tests I did with this game…
The animation appears to have changed quite a bit during development, to the point that probably even ZUN himself didn't know what he wanted it to look like in the end:

The original version unblits a 32×32 rectangle around Reimu that only grows on the X axis… for the first 5 frames. The unblitting call is only run if the corresponding sprite wasn't clipped at the edges of the playfield in the frame before, and ZUN uses the animation's frame number rather than the sprite loop variable to index the per-sprite clip flag array. The resulting out-of-bounds access then reads the sprite coordinates instead, which are never 0, thus interpreting all 5 sprites as clipped.
This variant would interpret the declared 5 effect coordinates as distinct sprites and unblit them correctly every frame. The end result is rather wimpy though… hardly appropriate for a Game Over, especially with the original animation in mind.
This variant would not unblit anything, and is probably closest to what the final animation should have been.

Finally, we get to the big main() function, serving as the duct tape that holds this game together. It may read rather disorganized with all the (actually necessary) assignments and function calls, but the only actual minor issue I've seen there is that you're robbed of any pellet destroy bonus collected on the final frame of the final boss. There is a certain charm in directly nesting the infinite main gameplay loop within the infinite per-life loop within the infinite stage loop. But come on, why is there no fourth scene loop? :zunpet: Instead, the game just starts a new REIIDEN.EXE process before and after a boss fight. With all the wildly mutated global state, that was probably a much saner choice.

The final secrets can be found in the debug stage selection. ZUN implemented the prompts using the C standard library's scanf() function, which is the natural choice for quick-and-dirty testing features like this one. However, the C standard library is also complete and utter trash, and so it's not surprising that both of the scanf() calls do… well, probably not what ZUN intended. The guaranteed out-of-bounds memory access in the select_flag route prompt thankfully has no real effect on the game, but it gets really interesting with the 面数 stage prompt.
Back in 2020, I already wrote about 📝 stages 21-24, and how they're loaded from actual data that ZUN shipped with the game. As it now turns out, the code that maps stage IDs to STAGE?.DAT scene numbers contains an explicit branch that maps any (1-based) stage number ≥21 to scene 7. Does this mean that an Extra Stage was indeed planned at some point? That branch seems way too specific to just be meant as a fallback. Maybe Asprey was on to something after all…

However, since ZUN passed the stage ID as a signed integer to scanf(), you can also enter negative numbers. The only place that kind of accidentally checks for them is the aforementioned stage ID → scene mapping, which ensures that (1-based) stages < 5 use the shrine's background image and BGM. With no checks anywhere else, we get a new set of "glitch stages":

TH01's stage -1
Stage -1
TH01's stage -2
Stage -2
TH01's stage -3
Stage -3
TH01's stage -4
Stage -4
TH01's stage -5
Stage -5

The scene loading function takes the entered 0-based stage ID value modulo 5, so these 4 are the only ones that "exist", and lower stage numbers will simply loop around to them. When loading these stages, the function accesses the data in REIIDEN.EXE that lies before the statically allocated 5-element stages-of-scene array, which happens to encompass Borland C++'s locale and exception handling data, as well as a small bit of ZUN's global variables. In particular, the obstacle/card HP on the tile I highlighted in green corresponds to the lowest byte of the 32-bit RNG seed. If it weren't for that and the fact that the obstacles/card HP on the few tiles before are similarly controlled by the x86 segment values of certain initialization function addresses, these glitch stages would be completely deterministic across PC-98 systems, and technically canon… :tannedcirno:
Stage -4 is the only playable one here as it's the only stage to end up below the 📝 heap corruption limit of 102 stage objects. Completing it loads Stage -3, which crashes with a Divide Error just like it does if it's directly selected. Unsurprisingly, this happens because all 50 card bytes at that memory location are 0, so one division (or in this case, modulo operation) by the number of cards is enough to crash the game.
Stage -5 is modulo'd to 0 and thus loads the first regular stage. The only apparent broken element there is the timer, which is handled by a completely different function that still operates with a (0-based) stage ID value of -5. Completing the stage loads Stage -4, which also crashes, but only because its 61 cards naturally cause the 📝 stack overflow in the flip-in animation for any stage with more than 50 cards.

And that's REIIDEN.EXE, the biggest and most bloated PC-98 Touhou executable, fully decompiled! Next up: Finishing this game with the main menu, and hoping I'll actually pull it off within 24 hours. (If I do, we might all have to thank 32th System, who independently decompiled half of the remaining 14 functions…)

📝 Posted:
🚚 Summary of:
P0201, P0202
Commits:
9342665...ff49e9e, ff49e9e...4568bf7
💰 Funded by:
Ember2528, Yanga, [Anonymous]
🏷 Tags:

The positive:

The negative:

The overview:


This time, we're back to the Orb hitbox being a logical 49×49 pixels in SinGyoku's center, and the shot hitbox being the weird one. What happens if you want the shot hitbox to be both offset to the left a bit and stretch the entire width of SinGyoku's sprite? You get a hitbox that ends in mid-air, far away from the right edge of the sprite:

Due to VRAM byte alignment, all player shots fired between gx = 376 and gx = 383 inclusive appear at the same visual X position, but are internally already partly outside the hitbox and therefore won't hit SinGyoku – compare the marked shot at gx = 376 to the one at gx = 380. So much for precisely visualizing hitboxes in this game…

Since the female and male forms also use the sphere entity's coordinates, they share the same hitbox.


Onto the rendering glitches then, which can – you guessed it – all be found in the sphere form's slam movement:

By having the sphere move from the right edge of the playfield to the left, this video demonstrates both the lazy reblitting and broken unblitting at the right edge for negative X velocities. Also, isn't it funny how Reimu can partly disappear from all the sloppy SinGyoku-related unblitting going on after her sprite was blitted?

Due to the low contrast of the sphere against the background, you typically don't notice these glitches, but the white invincibility flashing after a hit really does draw attention to them. This time, all of these glitches aren't even directly caused by ZUN having never learned about the EGC's bit length register – if he just wrote correct code for SinGyoku, none of this would have been an issue. Sigh… I wonder how many more glitches will be caused by improper use of this one function in the last 18% of REIIDEN.EXE.

There's even another bug here, with ZUN hardcoding a horizontal delta of 8 pixels rather than just passing the actual X velocity. Luckily, the maximum movement speed is 6 pixels on Lunatic, and this would have only turned into an additional observable glitch if the X velocity were to exceed 24 pixels. But that just means it's the kind of bug that still drains RE attention to prove that you can't actually observe it in-game under some circumstances.


The 5 pellet patterns are all pretty straightforward, with nothing to talk about. The code architecture during phase 2 does hint towards ZUN having had more creative patterns in mind – especially for the male form, which uses the transformation function's three pattern callback slots for three repetitions of the same pellet group.
There is one more oddity to be found at the very end of the fight:

The first frame of TH01 SinGyoku's defeat animation, showing the sphere blitted on top of a potentially active person form

Right before the defeat white-out animation, the sphere form is explicitly reblitted for no reason, on top of the form that was blitted to VRAM in the previous frame, and regardless of which form is currently active. If SinGyoku was meant to immediately transform back to the sphere form before being defeated, why isn't the person form unblitted before then? Therefore, the visibility of both forms is undeniably canon, and there is some lore meaning to be found here… :thonk:
In any case, that's SinGyoku done! 6th PC-98 Touhou boss fully decompiled, 25 remaining.


No FUUIN.EXE code rounding out the last push for a change, as the 📝 remaining missile code has been waiting in front of SinGyoku for a while. It already looked bad in November, but the angle-based sprite selection function definitely takes the cake when it comes to unnecessary and decadent floating-point abuse in this game.
The algorithm itself is very trivial: Even with 📝 .PTN requiring an additional quarter parameter to access 16×16 sprites, it's essentially just one bit shift, one addition, and one binary AND. For whatever reason though, ZUN casts the 8-bit missile angle into a 64-bit double, which turns the following explicit comparisons (!) against all possible 4 + 16 boundary angles (!!) into FPU operations. :zunpet: Even with naive and readable division and modulo operations, and the whole existence of this function not playing well with Turbo C++ 4.0J's terrible code generation at all, this could have been 3 lines of code and 35 un-inlined constant-time instructions. Instead, we've got this 207-instruction monster… but hey, at least it works. 🤷
The remaining time then went to YuugenMagan's initialization code, which allowed me to immediately remove more declarations from ASM land, but more on that once we get to the rest of that boss fight.

That leaves 76 functions until we're done with TH01! Next up: Card-flipping stage obstacles.

📝 Posted:
🚚 Summary of:
P0198, P0199, P0200
Commits:
48db0b7...440637e, 440637e...5af2048, 5af2048...67e46b5
💰 Funded by:
Ember2528, Lmocinemod, Yanga
🏷 Tags:

What's this? A simple, straightforward, easy-to-decompile TH01 boss with just a few minor quirks and only two rendering-related ZUN bugs? Yup, 2½ pushes, and Kikuri was done. Let's get right into the overview:

So yeah, there's your new timeout challenge. :godzun:


The few issues in this fight all relate to hitboxes, starting with the main one of Kikuri against the Orb. The coordinates in the code clearly describe a hitbox in the upper center of the disc, but then ZUN wrote a < sign instead of a > sign, resulting in an in-game hitbox that's not quite where it was intended to be…

Kikuri's actual hitbox. Since the Orb sprite doesn't change its shape, we can visualize the hitbox in a pixel-perfect way here. The Orb must be completely within the red area for a hit to be registered.
TODO TH01 Kikuri's intended hitboxTH01 Kikuri's actual hitbox

Much worse, however, are the teardrop ripples. It already starts with their rendering routine, which places the sprites from TAMAYEN.PTN at byte-aligned VRAM positions in the ultimate piece of if(…) {…} else if(…) {…} else if(…) {…} meme code. Rather than tracking the position of each of the five ripple sprites, ZUN suddenly went purely functional and manually hardcoded the exact rendering and collision detection calls for each frame of the animation, based on nothing but its total frame counter. :zunpet:
Each of the (up to) 5 columns is also unblitted and blitted individually before moving to the next column, starting at the center and then symmetrically moving out to the left and right edges. This wouldn't be a problem if ZUN's EGC-powered unblitting function didn't word-align its X coordinates to a 16×1 grid. If the ripple sprites happen to start at an odd VRAM byte position, their unblitting coordinates get rounded both down and up to the nearest 16 pixels, thus touching the adjacent 8 pixels of the previously blitted columns and leaving the well-known black vertical bars in their place. :tannedcirno:

OK, so where's the hitbox issue here? If you just look at the raw calculation, it's a slightly confusingly expressed, but perfectly logical 17 pixels. But this is where byte-aligned blitting has a direct effect on gameplay: These ripples can be spawned at any arbitrary, non-byte-aligned VRAM position, and collisions are calculated relative to this internal position. Therefore, the actual hitbox is shifted up to 7 pixels to the right, compared to where you would expect it from a ripple sprite's on-screen position:

Due to the deterministic nature of this part of the fight, it's always 5 pixels for this first set of ripples. These visualizations are obviously not pixel-perfect due to the different potential shapes of Reimu's sprite, so they instead relate to her 32×32 bounding box, which needs to be entirely inside the red area.

We've previously seen the same issue with the 📝 shot hitbox of Elis' bat form, where pixel-perfect collision detection against a byte-aligned sprite was merely a sidenote compared to the more serious X=Y coordinate bug. So why do I elevate it to bug status here? Because it directly affects dodging: Reimu's regular movement speed is 4 pixels per frame, and with the internal position of an on-screen ripple sprite varying by up to 7 pixels, any micrododging (or "grazing") attempt turns into a coin flip. It's sort of mitigated by the fact that Reimu is also only ever rendered at byte-aligned VRAM positions, but I wouldn't say that these two bugs cancel out each other.
Oh well, another set of rendering issues to be fixed in the hypothetical Anniversary Edition – obviously, the hitboxes should remain unchanged. Until then, you can always memorize the exact internal positions. The sequence of teardrop spawn points is completely deterministic and only controlled by the fixed per-difficulty spawn interval.


Aside from more minor coordinate inaccuracies, there's not much of interest in the rest of the pattern code. In another parallel to Elis though, the first soul pattern in phase 4 is aimed on every difficulty except Lunatic, where the pellets are once again statically fired downwards. This time, however, the pattern's difficulty is much more appropriately distributed across the four levels, with the simultaneous spinning circle pellets adding a constant aimed component to every difficulty level.

Kikuri's phase 4 patterns, on every difficulty.


That brings us to 5 fully decompiled PC-98 Touhou bosses, with 26 remaining… and another ½ of a push going to the cutscene code in FUUIN.EXE.
You wouldn't expect something as mundane as the boss slideshow code to contain anything interesting, but there is in fact a slight bit of speculation fuel there. The text typing functions take explicit string lengths, which precisely match the corresponding strings… for the most part. For the "Gatekeeper 'SinGyoku'" string though, ZUN passed 23 characters, not 22. Could that have been the "h" from the Hepburn romanization of 神玉?!
Also, come on, if this text is already blitted to VRAM for no reason, you could have gone for perfect centering at unaligned byte positions; the rendering function would have perfectly supported it. Instead, the X coordinates are still rounded up to the nearest byte.

The hardcoded ending cutscene functions should be even less interesting – don't they just show a bunch of images followed by frame delays? Until they don't, and we reach the 地獄/Jigoku Bad Ending with its special shake/"boom" effect, and this picture:

Picture #2 from ED2A.GRP.

Which is rendered by the following code:

for(int i = 0; i <= boom_duration; i++) { // (yes, off-by-one)
	if((i & 3) == 0) {
		graph_scrollup(8);
	} else {
		graph_scrollup(0);
	}

	end_pic_show(1); // ← different picture is rendered
	frame_delay(2);  // ← blocks until 2 VSync interrupts have occurred

	if(i & 1) {
		end_pic_show(2); // ← picture above is rendered
	} else {
		end_pic_show(1);
	}
}

Notice something? You should never see this picture because it's immediately overwritten before the frame is supposed to end. And yet it's clearly flickering up for about one frame with common emulation settings as well as on my real PC-9821 Nw133, clocked at 133 MHz. master.lib's graph_scrollup() doesn't block until VSync either, and removing these calls doesn't change anything about the blitted images. end_pic_show() uses the EGC to blit the given 320×200 quarter of VRAM from page 1 to the visible page 0, so the bottleneck shouldn't be there either…

…or should it? After setting it up via a few I/O port writes, the common method of EGC-powered blitting works like this:

  1. Read 16 bits from the source VRAM position on any single bitplane. This fills the EGC's 4 16-bit tile registers with the VRAM contents at that specific position on every bitplane. You do not care about the value the CPU returns from the read – in optimized code, you would make sure to just read into a register to avoid useless additional stores into local variables.
  2. Write any 16 bits to the target VRAM position on any single bitplane. This copies the contents of the EGC's tile registers to that specific position on every bitplane.

To transfer pixels from one VRAM page to another, you insert an additional write to I/O port 0xA6 before 1) and 2) to set your source and destination page… and that's where we find the bottleneck. Taking a look at the i486 CPU and its cycle counts, a single one of these page switches costs 17 cycles – 1 for MOVing the page number into AL, and 16 for the OUT instruction itself. Therefore, the 8,000 page switches required for EGC-copying a 320×200-pixel image require 136,000 cycles in total.

And that's the optimal case of using only those two instructions. 📝 As I implied last time, TH01 uses a function call for VRAM page switches, complete with creating and destroying a useless stack frame and unnecessarily updating a global variable in main memory. I tried optimizing ZUN's code by throwing out unnecessary code and using 📝 pseudo-registers to generate probably optimal assembly code, and that did speed up the blitting to almost exactly 50% of the original version's run time. However, it did little about the flickering itself. Here's a comparison of the first loop with boom_duration = 16, recorded in DOSBox-X with cputype=auto and cycles=max, and with i overlaid using the text chip. Caution, flashing lights:

The original animation, completing in 50 frames instead of the expected 34, thanks to slow blitting. Combined with the lack of double-buffering, this results in noticeable tearing as the screen refreshes while blitting is still in progress. (Note how the background of the ドカーン image is shifted 1 pixel to the left compared to pic #1.)
This optimized version completes in the expected 34 frames. No tearing happens to be visible in this recording, but the ドカーン image is still visible on every second loop iteration. (Note how the background of the ドカーン image is shifted 1 pixel to the left compared to pic #1.)

I pushed the optimized code to the th01_end_pic_optimize branch, to also serve as an example of how to get close to optimal code out of Turbo C++ 4.0J without writing a single ASM instruction.
And if you really want to use the EGC for this, that's the best you can do. It really sucks that it merely expanded the GRCG's 4×8-bit tile register to 4×16 bits. With 32 bits, ≥386 CPUs could have taken advantage of their wider registers and instructions to double the blitting performance. Instead, we now know the reason why 📝 Promisence Soft's EGC-powered sprite driver that ZUN later stole for TH03 is called SPRITE16 and not SPRITE32. What a massive disappointment.

But what's perhaps a bigger surprise: Blitting planar images from main memory is much faster than EGC-powered inter-page VRAM copies, despite the required manual access to all 4 bitplanes. In fact, the blitting functions for the .CDG/.CD2 format, used from TH03 onwards, would later demonstrate the optimal method of using REP MOVSD for blitting every line in 32-pixel chunks. If that was also used for these ending images, the core blitting operation would have taken ((12 + (3 × (320 / 32))) × 200 × 4) = 33,600 cycles, with not much more overhead for the surrounding row and bitplane loops. Sure, this doesn't factor in the whole infamous issue of VRAM being slow on PC-98, but the aforementioned 136,000 cycles don't even include any actual blitting either. And as you move up to later PC-98 models with Pentium CPUs, the gap between OUT and REP MOVSD only becomes larger. (Note that the page I linked above has a typo in the cycle count of REP MOVSD on Pentium CPUs: According to the original Intel Architecture and Programming Manual, it's 13+𝑛, not 3+𝑛.)
This difference explains why later games rarely use EGC-"accelerated" inter-page VRAM copies, and keep all of their larger images in main memory. It especially explains why TH04 and TH05 can get away with naively redrawing boss backdrop images on every frame.

In the end, the whole fact that ZUN did not define how long this image should be visible is enough for me to increment the game's overall bug counter. Who would have thought that looking at endings of all things would teach us a PC-98 performance lesson… Sure, optimizing TH01 already seemed promising just by looking at its bloated code, but I had no idea that its performance issues extended so far past that level.

That only leaves the common beginning part of all endings and a short main() function before we're done with FUUIN.EXE, and 98 functions until all of TH01 is decompiled! Next up: SinGyoku, who not only is the quickest boss to defeat in-game, but also comes with the least amount of code. See you very soon!

📝 Posted:
🚚 Summary of:
P0193, P0194, P0195, P0196, P0197
Commits:
e1f3f9f...183d7a2, 183d7a2...5d93a50, 5d93a50...e18c53d, e18c53d...57c9ac5, 57c9ac5...48db0b7
💰 Funded by:
Ember2528, Yanga
🏷 Tags:

With Elis, we've not only reached the midway point in TH01's boss code, but also a bunch of other milestones: Both REIIDEN.EXE and TH01 as a whole have crossed the 75% RE mark, and overall position independence has also finally cracked 80%!

And it got done in 4 pushes again? Yup, we're back to 📝 Konngara levels of redundancy and copy-pasta. This time, it didn't even stop at the big copy-pasted code blocks for the rift sprite and 256-pixel circle animations, with the words "redundant" and "unnecessary" ending up a total of 18 times in my source code comments.
But damn is this fight broken. As usual with TH01 bosses, let's start with a high-level overview:

This puts the earliest possible end of the fight at the first frame of phase 5. However, nothing prevents Elis' HP from reaching 0 before that point. You can nicely see this in 📝 debug mode: Wait until the HP bar has filled up to avoid heap corruption, hold ↵ Return to reduce her HP to 0, and watch how Elis still goes through a total of two patterns* and four teleport animations before accepting defeat.

But wait, heap corruption? Yup, there's a bug in the HP bar that already affected Konngara as well, and it isn't even just about the graphical glitches generated by negative HP:

Since Elis starts with 14 HP, which is an even number, this corruption is trivial to cause: Simply hold ↵ Return from the beginning of the fight, and the completion condition will never be true, as the HP and frame numbers run past the off-by-one meeting point.

Edit (2023-07-21): Pressing ↵ Return to reduce HP also works in test mode (game t). There, the game doesn't even check the heap, and consequently won't report any corruption, allowing the HP bar to be glitched even further.

Regular gameplay, however, entirely prevents this due to the fixed start positions of Reimu and the Orb, the Orb's fixed initial trajectory, and the 50 frames of delay until a bomb deals damage to a boss. These aspects make it impossible to hit Elis within the first 14 frames of phase 1, and ensure that her HP bar is always filled up completely. So ultimately, this bug ends up comparable in seriousness to the 📝 recursion / stack overflow bug in the memory info screen.


These wavy teleport animations point to a quite frustrating architectural issue in this fight. It's not even the fact that unblitting the yellow star sprites rips temporary holes into Elis' sprite; that's almost expected from TH01 at this point. Instead, it's all because of this unused frame of the animation:

An unused wave animation frame from TH01's BOSS5.BOS

With this sprite still being part of BOSS5.BOS, Girl-Elis has a total of 9 animation frames, 1 more than the 📝 8 per-entity sprites allowed by ZUN's architecture. The quick and easy solution would have been to simply bump the sprite array size by 1, but… nah, this would have added another 20 bytes to all 6 of the .BOS image slots. :zunpet: Instead, ZUN wrote the manual position synchronization code I mentioned in that 2020 blog post. Ironically, he then copy-pasted this snippet of code often enough that it ended up taking up more than 120 bytes in the Elis fight alone – with, you guessed it, some of those copies being redundant. Not to mention that just going from 8 to 9 sprites would have allowed ZUN to go down from 6 .BOS image slots to 3. That would have actually saved 420 bytes in addition to the manual synchronization trouble. Looking forward to SinGyoku, that's going to be fun again…


As for the fight itself, it doesn't take long until we reach its most janky danmaku pattern, right in phase 1:

The "pellets along circle" pattern on Lunatic, in its original version and with fanfiction fixes for everything that can potentially be interpreted as a bug.

Then again, it might very well be that all of this was intended, or, most likely, just left in the game as a happy accident. The latter interpretation would explain why ZUN didn't just delete the rendering calls for the lower-right quarter of the circle, because seriously, how would you not spot that? The phase 3 patterns continue with more minor graphical glitches that aren't even worth talking about anymore.


And then Elis transforms into her bat form at the beginning of Phase 5, which displays some rather unique hitboxes. The one against the Orb is fine, but the one against player shots…

… uses the bat's X coordinate for both X and Y dimensions. :zunpet: In regular gameplay, it's not too bad as most of the bat patterns fire aimed pellets which typically don't allow you to move below her sprite to begin with. But if you ever tried destroying these pellets while standing near the middle of the playfield, now you know why that didn't work. This video also nicely points out how the bat, like any boss sprite, is only ever blitted at positions on the 8×1-pixel VRAM byte grid, while collision detection uses the actual pixel position.

The bat form patterns are all relatively simple, with little variation depending on the difficulty level, except for the "slow pellet spreads" pattern. This one is almost easiest to dodge on Lunatic, where the 5-spreads are not only always fired downwards, but also at the hardcoded narrow delta angle, leaving plenty of room for the player to move out of the way:

The "slow pellet spreads" pattern of Elis' bat form, on every difficulty. Which version do you think is the easiest one?

Finally, we've got another potential timesave in the girl form's "safety circle" pattern:

After the circle spawned completely, you lose a life by moving outside it, but doing that immediately advances the pattern past the circle part. This part takes 200 frames, but the defeat animation only takes 82 frames, so you can save up to 118 frames there.

Final funny tidbit: As with all dynamic entities, this circle is only blitted to VRAM page 0 to allow easy unblitting. However, it's also kind of static, and there needs to be some way to keep the Orb, the player shots, and the pellets from ripping holes into it. So, ZUN just re-blits the circle every… 4 frames?! 🤪 The same is true for the Star of David and its surrounding circle, but there you at least get a flash animation to justify it. All the overlap is actually quite a good reason for not even attempting to 📝 mess with the hardware color palette instead.


And that's the 4th PC-98 Touhou boss decompiled, 27 to go… but wait, all these quirks, and I still got nothing about the one actual crash that can appear in regular gameplay? There has even been a recent video about it. The cause has to be in Elis' main function, after entering the defeat branch and before the blocking white-out animation. It can't be anywhere else other than in the 📝 central line blitting and unblitting function, called from 📝 that one broken laser reset+unblit function, because everything else in that branch looks fine… and I think we can rule out a crash in MDRV2's non-blocking fade-out call. That's going to need some extra research, and a 5th push added on top of this delivery.

Reproducing the crash was the whole challenge here. Even after moving Elis and Reimu to the exact positions seen in Pearl's video and setting Elis' HP to 0 on the exact same frame, everything ran fine for me. It's definitely no division by 0 this time, the function perfectly guards against that possibility. The line specified in the function's parameters is always clipped to the VRAM region as well, so we can also rule out illegal memory accesses here…

… or can we? Stepping through it all reminded me of how this function brings unblitting sloppiness to the next level: For each VRAM byte touched, ZUN actually unblits the 4 surrounding bytes, adding one byte to the left and two bytes to the right, and using a single 32-bit read and write per bitplane. So what happens if the function tries to unblit the topmost byte of VRAM, covering the pixel positions from (0, 0) to (7, 0) inclusive? The VRAM offset of 0x0000 is decremented to 0xFFFF to cover the one byte to the left, 4 bytes are written to this address, the CPU's internal offset overflows… and as it turns out, that is illegal even in Real Mode as of the 80286, and will raise a General Protection Fault. Which is… ignored by DOSBox-X, every Neko Project II version in common use, the CSCP emulators, SL9821, and T98-Next. Only Anex86 accurately emulates the behavior of real hardware here.

OK, but no laser fired by Elis ever reaches the top-left corner of the screen. How can such a fault even happen in practice? That's where the broken laser reset+unblit function comes in: Not only does it just flat out pass the wrong parameters to the line unblitting function – describing the line already traveled by the laser and stopping where the laser begins – but it also passes them wrongly, in the form of raw 32-bit fixed-point Q24.8 values, with no conversion other than a truncation to the signed 16-bit pixels expected by the function. What then follows is an attempt at interpolation and clipping to find a line segment between those garbage coordinates that actually falls within the boundaries of VRAM:

  1. right/bottom correspond to a laser's origin position, and left/top to the leftmost pixel of its moved-out top line. The bug therefore only occurs with lasers that stopped growing and have started moving.
  2. Moreover, it will only happen if either (left % 256) or (right % 256) is ≤ 127 and the other one of the two is ≥ 128. The typecast to signed 16-bit integers then turns the former into a large positive value and the latter into a large negative value, triggering the function's clipping code.
  3. The function then follows Bresenham's algorithm: left is ensured to be smaller than right by swapping the two values if necessary. If that happened, top and bottom are also swapped, regardless of their value – the algorithm does not care about their order.
  4. The slope in the X dimension is calculated using an integer division of ((bottom - top) / (right - left)). Both subtractions are done on signed 16-bit integers, and overflow accordingly.
  5. (-left × slope_x) is added to top, and left is set to 0.
  6. If both top and bottom are < 0 or ≥ 640, there's nothing to be unblitted. Otherwise, the final coordinates are clipped to the VRAM range of [(0, 0), (639, 399)].
  7. If the function got this far, the line to be unblitted is now very likely to reach from
    1. the top-left to the bottom-right corner, starting out at (0, 0) right away, or
    2. from the bottom-left corner to the top-right corner. In this case, you'd expect unblitting to end at (639, 0), but thanks to an off-by-one error, it actually ends at (640, -1), which is equivalent to (0, 0). Why add clipping to VRAM offset calculations when everything else is clipped already, right? :godzun:
Possible laser states that will cause the fault, with some debug output to help understand the cause, and any pellets removed for better readability. This can happen for all bosses that can potentially have shootout lasers on screen when being defeated, so it also applies to Mima. Fixing this is easier than understanding why it happens, but since y'all love reading this stuff…

tl;dr: TH01 has a high chance of freezing at a boss defeat sequence if there are diagonally moving lasers on screen, and if your PC-98 system raises a General Protection Fault on a 4-byte write to offset 0xFFFF, and if you don't run a TSR with an INT 0Dh handler that might handle this fault differently.

The easiest fix option would be to just remove the attempted laser unblitting entirely, but that would also have an impact on this game's… distinctive visual glitches, in addition to touching a whole lot of code bytes. If I ever get funded to work on a hypothetical TH01 Anniversary Edition that completely rearchitects the game to fix all these glitches, it would be appropriate there, but not for something that purports to be the original game.

(Sidenote to further hype up this Anniversary Edition idea for PC-98 hardware owners: With the amount of performance left on the table at every corner of this game, I'm pretty confident that we can get it to work decently on PC-98 models with just an 80286 CPU.)

Since we're in critical infrastructure territory once again, I went for the most conservative fix with the least impact on the binary: Simply changing any VRAM offsets >= 0xFFFD to 0x0000 to avoid the GPF, and leaving all other bugs in place. Sure, it's rather lazy and "incorrect"; the function still unblits a 32-pixel block there, but adding a special case for blitting 24 pixels would add way too much code. And seriously, it's not like anything happens in the 8 pixels between (24, 0) and (31, 0) inclusive during gameplay to begin with. To balance out the additional per-row if() branch, I inlined the VRAM page change I/O, saving two function calls and one memory write per unblitted row.

That means it's time for a new community_choice_fixes build, containing the new definitive bugfixed versions of these games: 2022-05-31-community-choice-fixes.zip Check the th01_critical_fixes branch for the modified TH01 code. It also contains a fix for the HP bar heap corruption in test or debug mode – simply changing the == comparison to <= is enough to avoid it, and negative HP will still create aesthetic glitch art.


Once again, I then was left with ½ of a push, which I finally filled with some FUUIN.EXE code, specifically the verdict screen. The most interesting part here is the player title calculation, which is quite sneaky: There are only 6 skill levels, but three groups of titles for each level, and the title you'll see is picked from a random group. It looks like this is the first time anyone has documented the calculation?
As for the levels, ZUN definitely didn't expect players to do particularly well. With a 1cc being the standard goal for completing a Touhou game, it's especially funny how TH01 expects you to continue a lot: The code has branches for up to 21 continues, and the on-screen table explicitly leaves room for 3 digits worth of continues per 5-stage scene. Heck, these counts are even stored in 32-bit long variables.

Next up: 📝 Finally finishing the long overdue Touhou Patch Center MediaWiki update work, while continuing with Kikuri in the meantime. Originally I wasn't sure about what to do between Elis and Seihou, but with Ember2528's surprise contribution last week, y'all have demonstrated more than enough interest in the idea of getting TH01 done sooner rather than later. And I agree – after all, we've got the 25th anniversary of its first public release coming up on August 15, and I might still manage to completely decompile this game by that point…

📝 Posted:
🚚 Summary of:
P0174, P0175, P0176, P0177, P0178, P0179, P0180, P0181
Commits:
27f901c...a0fe812, a0fe812...40ac9a7, 40ac9a7...c5dc45b, c5dc45b...5f0cabc, 5f0cabc...60621f8, 60621f8...9e5b344, 9e5b344...091f19f, 091f19f...313450f
💰 Funded by:
Ember2528, Yanga
🏷 Tags:

Here we go, TH01 Sariel! This is the single biggest boss fight in all of PC-98 Touhou: If we include all custom effect code we previously decompiled, it amounts to a total of 10.31% of all code in TH01 (and 3.14% overall). These 8 pushes cover the final 8.10% (or 2.47% overall), and are likely to be the single biggest delivery this project will ever see. Considering that I only managed to decompile 6.00% across all games in 2021, 2022 is already off to a much better start!

So, how can Sariel's code be that large? Well, we've got:

In total, it's just under 3,000 lines of C++ code, containing a total of 8 definite ZUN bugs, 3 of them being subpixel/pixel confusions. That might not look all too bad if you compare it to the 📝 player control function's 8 bugs in 900 lines of code, but given that Konngara had 0… (Edit (2022-07-17): Konngara contains two bugs after all: A 📝 possible heap corruption in test or debug mode, and the infamous 📝 temporary green discoloration.) And no, the code doesn't make it obvious whether ZUN coded Konngara or Sariel first; there's just as much evidence for either.

Some terminology before we start: Sariel's first form is separated into four phases, indicated by different background images, that cycle until Sariel's HP reach 0 and the second, single-phase form starts. The danmaku patterns within each phase are also on a cycle, and the game picks a random but limited number of patterns per phase before transitioning to the next one. The fight always starts at pattern 1 of phase 1 (the random purple lasers), and each new phase also starts at its respective first pattern.


Sariel's bugs already start at the graphics asset level, before any code gets to run. Some of the patterns include a wand raise animation, which is stored in BOSS6_2.BOS:

TH01 BOSS6_2.BOS
Umm… OK? The same sprite twice, just with slightly different colors? So how is the wand lowered again?

The "lowered wand" sprite is missing in this file simply because it's captured from the regular background image in VRAM, at the beginning of the fight and after every background transition. What I previously thought to be 📝 background storage code has therefore a different meaning in Sariel's case. Since this captured sprite is fully opaque, it will reset the entire 128×128 wand area… wait, 128×128, rather than 96×96? Yup, this lowered sprite is larger than necessary, wasting 1,967 bytes of conventional memory.
That still doesn't quite explain the second sprite in BOSS6_2.BOS though. Turns out that the black part is indeed meant to unblit the purple reflection (?) in the first sprite. But… that's not how you would correctly unblit that?

VRAM after blitting the first sprite of TH01's BOSS6_2.BOS VRAM after blitting the second sprite of TH01's BOSS6_2.BOS

The first sprite already eats up part of the red HUD line, and the second one additionally fails to recover the seal pixels underneath, leaving a nice little black hole and some stray purple pixels until the next background transition. :tannedcirno: Quite ironic given that both sprites do include the right part of the seal, which isn't even part of the animation.


Just like Konngara, Sariel continues the approach of using a single function per danmaku pattern or custom entity. While I appreciate that this allows all pattern- and entity-specific state to be scoped locally to that one function, it quickly gets ugly as soon as such a function has to do more than one thing.
The "bird function" is particularly awful here: It's just one if(…) {…} else if(…) {…} else if(…) {…} chain with different branches for the subfunction parameter, with zero shared code between any of these branches. It also uses 64-bit floating-point double as its subpixel type… and since it also takes four of those as parameters (y'know, just in case the "spawn new bird" subfunction is called), every call site has to also push four double values onto the stack. Thanks to Turbo C++ even using the FPU for pushing a 0.0 constant, we have already reached maximum floating-point decadence before even having seen a single danmaku pattern. Why decadence? Every possible spawn position and velocity in both bird patterns just uses pixel resolution, with no fractional component in sight. And there goes another 720 bytes of conventional memory.

Speaking about bird patterns, the red-bird one is where we find the first code-level ZUN bug: The spawn cross circle sprite suddenly disappears after it finished spawning all the bird eggs. How can we tell it's a bug? Because there is code to smoothly fly this sprite off the playfield, that code just suddenly forgets that the sprite's position is stored in Q12.4 subpixels, and treats it as raw screen pixels instead. :zunpet: As a result, the well-intentioned 640×400 screen-space clipping rectangle effectively shrinks to 38×23 pixels in the top-left corner of the screen. Which the sprite is always outside of, and thus never rendered again.
The intended animation is easily restored though:

Sariel's third pattern, and the first to spawn birds, in its original and fixed versions. Note that I somewhat fixed the bird hatch animation as well: ZUN's code never unblits any frame of animation there, and simply blits every new one on top of the previous one.

Also, did you know that birds actually have a quite unfair 14×38-pixel hitbox? Not that you'd ever collide with them in any of the patterns…

Another 3 of the 8 bugs can be found in the symmetric, interlaced spawn rays used in three of the patterns, and the 32×32 debris "sprites" shown at their endpoint, at the edge of the screen. You kinda have to commend ZUN's attention to detail here, and how he wrote a lot of code for those few rapidly animated pixels that you most likely don't even notice, especially with all the other wrong pixels resulting from rendering glitches. One of the bugs in the very final pattern of phase 4 even turns them into the vortex sprites from the second pattern in phase 1 during the first 5 frames of the first time the pattern is active, and I had to single-step the blitting calls to verify it.
It certainly was annoying how much time I spent making sense of these bugs, and all weird blitting offsets, for just a few pixels… Let's look at something more wholesome, shall we?


So far, we've only seen the PC-98 GRCG being used in RMW (read-modify-write) mode, which I previously 📝 explained in the context of TH01's red-white HP pattern. The second of its three modes, TCR (Tile Compare Read), affects VRAM reads rather than writes, and performs "color extraction" across all 4 bitplanes: Instead of returning raw 1bpp data from one plane, a VRAM read will instead return a bitmask, with a 1 bit at every pixel whose full 4-bit color exactly matches the color at that offset in the GRCG's tile register, and 0 everywhere else. Sariel uses this mode to make sure that the 2×2 particles and the wind effect are only blitted on top of "air color" pixels, with other parts of the background behaving like a mask. The algorithm:

  1. Set the GRCG to TCR mode, and all 8 tile register dots to the air color
  2. Read N bits from the target VRAM position to obtain an N-bit mask where all 1 bits indicate air color pixels at the respective position
  3. AND that mask with the alpha plane of the sprite to be drawn, shifted to the correct start bit within the 8-pixel VRAM byte
  4. Set the GRCG to RMW mode, and all 8 tile register dots to the color that should be drawn
  5. Write the previously obtained bitmask to the same position in VRAM

Quite clever how the extracted colors double as a secondary alpha plane, making for another well-earned good-code tag. The wind effect really doesn't deserve it, though:

As far as I can tell, ZUN didn't use TCR mode anywhere else in PC-98 Touhou. Tune in again later during a TH04 or TH05 push to learn about TDW, the final GRCG mode!


Speaking about the 2×2 particle systems, why do we need three of them? Their only observable difference lies in the way they move their particles:

  1. Up or down in a straight line (used in phases 4 and 2, respectively)
  2. Left or right in a straight line (used in the second form)
  3. Left and right in a sinusoidal motion (used in phase 3, the "dark orange" one)

Out of all possible formats ZUN could have used for storing the positions and velocities of individual particles, he chose a) 64-bit / double-precision floating-point, and b) raw screen pixels. Want to take a guess at which data type is used for which particle system?

If you picked double for 1) and 2), and raw screen pixels for 3), you are of course correct! :godzun: Not that I'm implying that it should have been the other way round – screen pixels would have perfectly fit all three systems use cases, as all 16-bit coordinates are extended to 32 bits for trigonometric calculations anyway. That's what, another 1.080 bytes of wasted conventional memory? And that's even calculated while keeping the current architecture, which allocates space for 3×30 particles as part of the game's global data, although only one of the three particle systems is active at any given time.

That's it for the first form, time to put on "Civilization of Magic"! Or "死なばもろとも"? Or "Theme of 地獄めくり"? Or whatever SYUGEN is supposed to mean…


… and the code of these final patterns comes out roughly as exciting as their in-game impact. With the big exception of the very final "swaying leaves" pattern: After 📝 Q4.4, 📝 Q28.4, 📝 Q24.8, and double variables, this pattern uses… decimal subpixels? Like, multiplying the number by 10, and using the decimal one's digit to represent the fractional part? Well, sure, if you really insist on moving the leaves in cleanly represented integer multiples of ⅒, which is infamously impossible in IEEE 754. Aside from aesthetic reasons, it only really combines less precision (10 possible fractions rather than the usual 16) with the inferior performance of having to use integer divisions and multiplications rather than simple bit shifts. And it's surely not because the leaf sprites needed an extended integer value range of [-3276, +3276], compared to Q12.4's [-2047, +2048]: They are clipped to 640×400 screen space anyway, and are removed as soon as they leave this area.

This pattern also contains the second bug in the "subpixel/pixel confusion hiding an entire animation" category, causing all of BOSS6GR4.GRC to effectively become unused:

The "swaying leaves" pattern. ZUN intended a splash animation to be shown once each leaf "spark" reaches the top of the playfield, which is never displayed in the original game.

At least their hitboxes are what you would expect, exactly covering the 30×30 pixels of Reimu's sprite. Both animation fixes are available on the th01_sariel_fixes branch.

After all that, Sariel's main function turned out fairly unspectacular, just putting everything together and adding some shake, transition, and color pulse effects with a bunch of unnecessary hardware palette changes. There is one reference to a missing BOSS6.GRP file during the first→second form transition, suggesting that Sariel originally had a separate "first form defeat" graphic, before it was replaced with just the shaking effect in the final game.
Speaking about the transition code, it is kind of funny how the… um, imperative and concrete nature of TH01 leads to these 2×24 lines of straight-line code. They kind of look like ZUN rattling off a laundry list of subsystems and raw variables to be reinitialized, making damn sure to not forget anything.


Whew! Second PC-98 Touhou boss completely decompiled, 29 to go, and they'll only get easier from here! 🎉 The next one in line, Elis, is somewhere between Konngara and Sariel as far as x86 instruction count is concerned, so that'll need to wait for some additional funding. Next up, therefore: Looking at a thing in TH03's main game code – really, I have little idea what it will be!

Now that the store is open again, also check out the 📝 updated RE progress overview I've posted together with this one. In addition to more RE, you can now also directly order a variety of mods; all of these are further explained in the order form itself.

📝 Posted:
🚚 Summary of:
P0165, P0166, P0167
Commits:
7a0e5d8...f2bca01, f2bca01...e697907, e697907...c2de6ab
💰 Funded by:
Ember2528
🏷 Tags:

OK, TH01 missile bullets. Can we maybe have a well-behaved entity type, without any weirdness? Just once?

Ehh, kinda. Apart from another 150 bytes wasted on unused structure members, this code is indeed more on the low end in terms of overall jank. It does become very obvious why dodging these missiles in the YuugenMagan, Mima, and Elis fights feels so awful though: An unfair 46×46 pixel hitbox around Reimu's center pixel, combined with the comeback of 📝 interlaced rendering, this time in every stage. ZUN probably did this because missiles are the only 16×16 sprite in TH01 that is blitted to unaligned X positions, which effectively ends up touching a 32×16 area of VRAM per sprite.
But even if we assume VRAM writes to be the bottleneck here, it would have been totally possible to render every missile in every frame at roughly the same amount of CPU time that the original game uses for interlaced rendering:

That's an optimization that would have significantly benefitted the game, in contrast to all of the fake ones introduced in later games. Then again, this optimization is actually something that the later games do, and it might have in fact been necessary to achieve their higher bullet counts without significant slowdown.

Unfortunately, it was only worth decompiling half of the missile code right now, thanks to gratuitous FPU usage in the other half, where 📝 double variables are compared to float literals. That one will have to wait 📝 until after SinGyoku.


After some effectively unused Mima sprite effect code that is so broken that it's impossible to make sense out of it, we get to the final feature I wanted to cover for all bosses in parallel before returning to Sariel: The separate sprite background storage for moving or animated boss sprites in the Mima, Elis, and Sariel fights. But, uh… why is this necessary to begin with? Doesn't TH01 already reserve the other VRAM page for backgrounds?
Well, these sprites are quite big, and ZUN didn't want to blit them from main memory on every frame. After all, TH01 and TH02 had a minimum required clock speed of 33 MHz, half of the speed required for the later three games. So, he simply blitted these boss sprites to both VRAM pages, leading the usual unblitting calls to only remove the other sprites on top of the boss. However, these bosses themselves want to move across the screen… and this makes it necessary to save the stage background behind them in some other way.

Enter .PTN, and its functions to capture a 16×16 or 32×32 square from VRAM into a sprite slot. No problem with that approach in theory, as the size of all these bigger sprites is a multiple of 32×32; splitting a larger sprite into these smaller 32×32 chunks makes the code look just a little bit clumsy (and, of course, slower).
But somewhere during the development of Mima's fight, ZUN apparently forgot that those sprite backgrounds existed. And once Mima's 🚫 casting sprite is blitted on top of her regular sprite, using just regular sprite transparency, she ends up with her infamous third arm:

TH01 Mima's third arm

Ironically, there's an unused code path in Mima's unblit function where ZUN assumes a height of 48 pixels for Mima's animation sprites rather than the actual 64. This leads to even clumsier .PTN function calls for the bottom 128×16 pixels… Failing to unblit the bottom 16 pixels would have also yielded that third arm, although it wouldn't have looked as natural. Still wouldn't say that it was intentional; maybe this casting sprite was just added pretty late in the game's development?


So, mission accomplished, Sariel unblocked… at 2¼ pushes. :thonk: That's quite some time left for some smaller stage initialization code, which bundles a bunch of random function calls in places where they logically really don't belong. The stage opening animation then adds a bunch of VRAM inter-page copies that are not only redundant but can't even be understood without knowing the hidden internal state of the last VRAM page accessed by previous ZUN code…
In better news though: Turbo C++ 4.0 really doesn't seem to have any complexity limit on inlining arithmetic expressions, as long as they only operate on compile-time constants. That's how we get macro-free, compile-time Shift-JIS to JIS X 0208 conversion of the individual code points in the 東方★靈異伝 string, in a compiler from 1994. As long as you don't store any intermediate results in variables, that is… :tannedcirno:

But wait, there's more! With still ¼ of a push left, I also went for the boss defeat animation, which includes the route selection after the SinGyoku fight.
As in all other instances, the 2× scaled font is accomplished by first rendering the text at regular 1× resolution to the other, invisible VRAM page, and then scaled from there to the visible one. However, the route selection is unique in that its scaled text is both drawn transparently on top of the stage background (not onto a black one), and can also change colors depending on the selection. It would have been no problem to unblit and reblit the text by rendering the 1× version to a position on the invisible VRAM page that isn't covered by the 2× version on the visible one, but ZUN (needlessly) clears the invisible page before rendering any text. :zunpet: Instead, he assigned a separate VRAM color for both the 魔界 and 地獄 options, and only changed the palette value for these colors to white or gray, depending on the correct selection. This is another one of the 📝 rare cases where TH01 demonstrates good use of PC-98 hardware, as the 魔界へ and 地獄へ strings don't need to be reblitted during the selection process, only the Orb "cursor" does.

Then, why does this still not count as good-code? When changing palette colors, you kinda need to be aware of everything else that can possibly be on screen, which colors are used there, and which aren't and can therefore be used for such an effect without affecting other sprites. In this case, well… hover over the image below, and notice how Reimu's hair and the bomb sprites in the HUD light up when Makai is selected:

Demonstration of palette changes in TH01's route selection

This push did end on a high note though, with the generic, non-SinGyoku version of the defeat animation being an easily parametrizable copy. And that's how you decompile another 2.58% of TH01 in just slightly over three pushes.


Now, we're not only ready to decompile Sariel, but also Kikuri, Elis, and SinGyoku without needing any more detours into non-boss code. Thanks to the current TH01 funding subscriptions, I can plan to cover most, if not all, of Sariel in a single push series, but the currently 3 pending pushes probably won't suffice for Sariel's 8.10% of all remaining code in TH01. We've got quite a lot of not specifically TH01-related funds in the backlog to pass the time though.

Due to recent developments, it actually makes quite a lot of sense to take a break from TH01: spaztron64 has managed what every Touhou download site so far has failed to do: Bundling all 5 game onto a single .HDI together with pre-configured PC-98 emulators and a nice boot menu, and hosting the resulting package on a proper website. While this first release is already quite good (and much better than my attempt from 2014), there is still a bit of room for improvement to be gained from specific ReC98 research. Next up, therefore:

📝 Posted:
🚚 Summary of:
P0067, P0068, P0069
Commits:
e55a48b...ebb30ce, ebb30ce...2ac00d4, e0d0dcd...0f18dbc
💰 Funded by:
Splashman, Yanga, [Anonymous]
🏷 Tags:

Now that's more like the speed I was expecting! After a few more unused functions for palette fading and rectangle blitting, we've reached the big line drawing functions. And the biggest one among them, drawing a straight line at any angle between two points using Bresenham's algorithm, actually happens to be the single longest function present in more than one binary in all of PC-98 Touhou, and #23 on the list of individual longest functions.

And it technically has a ZUN bug! If you pass a point outside the (0, 0) - (639, 399) screen range, the function will calculate a new point at the edge of the screen, so that the resulting line will retain the angle intended by the points given. Except that it does so by calculating the line slope using an integer division rather than a floating-point one :zunpet: Doesn't seem like it actually causes any weirdly skewed lines to be drawn in-game, though; that case is only hit in the Mima boss fight, which draws a few lines with a bottom coordinate of 400 rather than the maximum of 399. It might also cause the wrong background pixels to be restored during parts of the YuugenMagan fight, leading to flickering sprites, but seriously, that's an issue everywhere you look in this game.

Together with the rendering-text-to-VRAM function we've mostly already known from TH02, this pushed the total RE percentage well over 20%, and almost doubled the TH01 RE percentage, all within three pushes. And comparatively, it went really smoothly, to the point (ha) where I even had enough time left to also include the single-point functions that come next in that code segment. Since about half of the remaining functions in OP.EXE are present in more than just itself, I'll be able to at least keep up this speed until OP.EXE hits the 70% RE mark. That is, as long as the backers' priorities continue to be generic RE or "giving some love to TH01"… we don't have a precedent for TH01's actual game code yet.

And that's all the TH01 progress funded for January! Next up, we actually do have a focus on TH03's game and scoring mechanics… or at least the foundation for that.