⮜ Blog

⮜ List of tags

Showing all posts tagged
and

📝 Posted:
🚚 Summary of:
P0193, P0194, P0195, P0196, P0197
Commits:
e1f3f9f...183d7a2, 183d7a2...5d93a50, 5d93a50...e18c53d, e18c53d...57c9ac5, 57c9ac5...48db0b7
💰 Funded by:
Ember2528, Yanga
🏷 Tags:

With Elis, we've not only reached the midway point in TH01's boss code, but also a bunch of other milestones: Both REIIDEN.EXE and TH01 as a whole have crossed the 75% RE mark, and overall position independence has also finally cracked 80%!

And it got done in 4 pushes again? Yup, we're back to 📝 Konngara levels of redundancy and copy-pasta. This time, it didn't even stop at the big copy-pasted code blocks for the rift sprite and 256-pixel circle animations, with the words "redundant" and "unnecessary" ending up a total of 18 times in my source code comments.
But damn is this fight broken. As usual with TH01 bosses, let's start with a high-level overview:

This puts the earliest possible end of the fight at the first frame of phase 5. However, nothing prevents Elis' HP from reaching 0 before that point. You can nicely see this in 📝 debug mode: Wait until the HP bar has filled up to avoid heap corruption, hold ↵ Return to reduce her HP to 0, and watch how Elis still goes through a total of two patterns* and four teleport animations before accepting defeat.

But wait, heap corruption? Yup, there's a bug in the HP bar that already affected Konngara as well, and it isn't even just about the graphical glitches generated by negative HP:

Since Elis starts with 14 HP, which is an even number, this corruption is trivial to cause: Simply hold ↵ Return from the beginning of the fight, and the completion condition will never be true, as the HP and frame numbers run past the off-by-one meeting point.

Edit (2023-07-21): Pressing ↵ Return to reduce HP also works in test mode (game t). There, the game doesn't even check the heap, and consequently won't report any corruption, allowing the HP bar to be glitched even further.

Regular gameplay, however, entirely prevents this due to the fixed start positions of Reimu and the Orb, the Orb's fixed initial trajectory, and the 50 frames of delay until a bomb deals damage to a boss. These aspects make it impossible to hit Elis within the first 14 frames of phase 1, and ensure that her HP bar is always filled up completely. So ultimately, this bug ends up comparable in seriousness to the 📝 recursion / stack overflow bug in the memory info screen.


These wavy teleport animations point to a quite frustrating architectural issue in this fight. It's not even the fact that unblitting the yellow star sprites rips temporary holes into Elis' sprite; that's almost expected from TH01 at this point. Instead, it's all because of this unused frame of the animation:

An unused wave animation frame from TH01's BOSS5.BOS

With this sprite still being part of BOSS5.BOS, Girl-Elis has a total of 9 animation frames, 1 more than the 📝 8 per-entity sprites allowed by ZUN's architecture. The quick and easy solution would have been to simply bump the sprite array size by 1, but… nah, this would have added another 20 bytes to all 6 of the .BOS image slots. :zunpet: Instead, ZUN wrote the manual position synchronization code I mentioned in that 2020 blog post. Ironically, he then copy-pasted this snippet of code often enough that it ended up taking up more than 120 bytes in the Elis fight alone – with, you guessed it, some of those copies being redundant. Not to mention that just going from 8 to 9 sprites would have allowed ZUN to go down from 6 .BOS image slots to 3. That would have actually saved 420 bytes in addition to the manual synchronization trouble. Looking forward to SinGyoku, that's going to be fun again…


As for the fight itself, it doesn't take long until we reach its most janky danmaku pattern, right in phase 1:

The "pellets along circle" pattern on Lunatic, in its original version and with fanfiction fixes for everything that can potentially be interpreted as a bug.

Then again, it might very well be that all of this was intended, or, most likely, just left in the game as a happy accident. The latter interpretation would explain why ZUN didn't just delete the rendering calls for the lower-right quarter of the circle, because seriously, how would you not spot that? The phase 3 patterns continue with more minor graphical glitches that aren't even worth talking about anymore.


And then Elis transforms into her bat form at the beginning of Phase 5, which displays some rather unique hitboxes. The one against the Orb is fine, but the one against player shots…

… uses the bat's X coordinate for both X and Y dimensions. :zunpet: In regular gameplay, it's not too bad as most of the bat patterns fire aimed pellets which typically don't allow you to move below her sprite to begin with. But if you ever tried destroying these pellets while standing near the middle of the playfield, now you know why that didn't work. This video also nicely points out how the bat, like any boss sprite, is only ever blitted at positions on the 8×1-pixel VRAM byte grid, while collision detection uses the actual pixel position.

The bat form patterns are all relatively simple, with little variation depending on the difficulty level, except for the "slow pellet spreads" pattern. This one is almost easiest to dodge on Lunatic, where the 5-spreads are not only always fired downwards, but also at the hardcoded narrow delta angle, leaving plenty of room for the player to move out of the way:

The "slow pellet spreads" pattern of Elis' bat form, on every difficulty. Which version do you think is the easiest one?

Finally, we've got another potential timesave in the girl form's "safety circle" pattern:

After the circle spawned completely, you lose a life by moving outside it, but doing that immediately advances the pattern past the circle part. This part takes 200 frames, but the defeat animation only takes 82 frames, so you can save up to 118 frames there.

Final funny tidbit: As with all dynamic entities, this circle is only blitted to VRAM page 0 to allow easy unblitting. However, it's also kind of static, and there needs to be some way to keep the Orb, the player shots, and the pellets from ripping holes into it. So, ZUN just re-blits the circle every… 4 frames?! 🤪 The same is true for the Star of David and its surrounding circle, but there you at least get a flash animation to justify it. All the overlap is actually quite a good reason for not even attempting to 📝 mess with the hardware color palette instead.


And that's the 4th PC-98 Touhou boss decompiled, 27 to go… but wait, all these quirks, and I still got nothing about the one actual crash that can appear in regular gameplay? There has even been a recent video about it. The cause has to be in Elis' main function, after entering the defeat branch and before the blocking white-out animation. It can't be anywhere else other than in the 📝 central line blitting and unblitting function, called from 📝 that one broken laser reset+unblit function, because everything else in that branch looks fine… and I think we can rule out a crash in MDRV2's non-blocking fade-out call. That's going to need some extra research, and a 5th push added on top of this delivery.

Reproducing the crash was the whole challenge here. Even after moving Elis and Reimu to the exact positions seen in Pearl's video and setting Elis' HP to 0 on the exact same frame, everything ran fine for me. It's definitely no division by 0 this time, the function perfectly guards against that possibility. The line specified in the function's parameters is always clipped to the VRAM region as well, so we can also rule out illegal memory accesses here…

… or can we? Stepping through it all reminded me of how this function brings unblitting sloppiness to the next level: For each VRAM byte touched, ZUN actually unblits the 4 surrounding bytes, adding one byte to the left and two bytes to the right, and using a single 32-bit read and write per bitplane. So what happens if the function tries to unblit the topmost byte of VRAM, covering the pixel positions from (0, 0) to (7, 0) inclusive? The VRAM offset of 0x0000 is decremented to 0xFFFF to cover the one byte to the left, 4 bytes are written to this address, the CPU's internal offset overflows… and as it turns out, that is illegal even in Real Mode as of the 80286, and will raise a General Protection Fault. Which is… ignored by DOSBox-X, every Neko Project II version in common use, the CSCP emulators, SL9821, and T98-Next. Only Anex86 accurately emulates the behavior of real hardware here.

OK, but no laser fired by Elis ever reaches the top-left corner of the screen. How can such a fault even happen in practice? That's where the broken laser reset+unblit function comes in: Not only does it just flat out pass the wrong parameters to the line unblitting function – describing the line already traveled by the laser and stopping where the laser begins – but it also passes them wrongly, in the form of raw 32-bit fixed-point Q24.8 values, with no conversion other than a truncation to the signed 16-bit pixels expected by the function. What then follows is an attempt at interpolation and clipping to find a line segment between those garbage coordinates that actually falls within the boundaries of VRAM:

  1. right/bottom correspond to a laser's origin position, and left/top to the leftmost pixel of its moved-out top line. The bug therefore only occurs with lasers that stopped growing and have started moving.
  2. Moreover, it will only happen if either (left % 256) or (right % 256) is ≤ 127 and the other one of the two is ≥ 128. The typecast to signed 16-bit integers then turns the former into a large positive value and the latter into a large negative value, triggering the function's clipping code.
  3. The function then follows Bresenham's algorithm: left is ensured to be smaller than right by swapping the two values if necessary. If that happened, top and bottom are also swapped, regardless of their value – the algorithm does not care about their order.
  4. The slope in the X dimension is calculated using an integer division of ((bottom - top) / (right - left)). Both subtractions are done on signed 16-bit integers, and overflow accordingly.
  5. (-left × slope_x) is added to top, and left is set to 0.
  6. If both top and bottom are < 0 or ≥ 640, there's nothing to be unblitted. Otherwise, the final coordinates are clipped to the VRAM range of [(0, 0), (639, 399)].
  7. If the function got this far, the line to be unblitted is now very likely to reach from
    1. the top-left to the bottom-right corner, starting out at (0, 0) right away, or
    2. from the bottom-left corner to the top-right corner. In this case, you'd expect unblitting to end at (639, 0), but thanks to an off-by-one error, it actually ends at (640, -1), which is equivalent to (0, 0). Why add clipping to VRAM offset calculations when everything else is clipped already, right? :godzun:
Possible laser states that will cause the fault, with some debug output to help understand the cause, and any pellets removed for better readability. This can happen for all bosses that can potentially have shootout lasers on screen when being defeated, so it also applies to Mima. Fixing this is easier than understanding why it happens, but since y'all love reading this stuff…

tl;dr: TH01 has a high chance of freezing at a boss defeat sequence if there are diagonally moving lasers on screen, and if your PC-98 system raises a General Protection Fault on a 4-byte write to offset 0xFFFF, and if you don't run a TSR with an INT 0Dh handler that might handle this fault differently.

The easiest fix option would be to just remove the attempted laser unblitting entirely, but that would also have an impact on this game's… distinctive visual glitches, in addition to touching a whole lot of code bytes. If I ever get funded to work on a hypothetical TH01 Anniversary Edition that completely rearchitects the game to fix all these glitches, it would be appropriate there, but not for something that purports to be the original game.

(Sidenote to further hype up this Anniversary Edition idea for PC-98 hardware owners: With the amount of performance left on the table at every corner of this game, I'm pretty confident that we can get it to work decently on PC-98 models with just an 80286 CPU.)

Since we're in critical infrastructure territory once again, I went for the most conservative fix with the least impact on the binary: Simply changing any VRAM offsets >= 0xFFFD to 0x0000 to avoid the GPF, and leaving all other bugs in place. Sure, it's rather lazy and "incorrect"; the function still unblits a 32-pixel block there, but adding a special case for blitting 24 pixels would add way too much code. And seriously, it's not like anything happens in the 8 pixels between (24, 0) and (31, 0) inclusive during gameplay to begin with. To balance out the additional per-row if() branch, I inlined the VRAM page change I/O, saving two function calls and one memory write per unblitted row.

That means it's time for a new community_choice_fixes build, containing the new definitive bugfixed versions of these games: 2022-05-31-community-choice-fixes.zip Check the th01_critical_fixes branch for the modified TH01 code. It also contains a fix for the HP bar heap corruption in test or debug mode – simply changing the == comparison to <= is enough to avoid it, and negative HP will still create aesthetic glitch art.


Once again, I then was left with ½ of a push, which I finally filled with some FUUIN.EXE code, specifically the verdict screen. The most interesting part here is the player title calculation, which is quite sneaky: There are only 6 skill levels, but three groups of titles for each level, and the title you'll see is picked from a random group. It looks like this is the first time anyone has documented the calculation?
As for the levels, ZUN definitely didn't expect players to do particularly well. With a 1cc being the standard goal for completing a Touhou game, it's especially funny how TH01 expects you to continue a lot: The code has branches for up to 21 continues, and the on-screen table explicitly leaves room for 3 digits worth of continues per 5-stage scene. Heck, these counts are even stored in 32-bit long variables.

Next up: 📝 Finally finishing the long overdue Touhou Patch Center MediaWiki update work, while continuing with Kikuri in the meantime. Originally I wasn't sure about what to do between Elis and Seihou, but with Ember2528's surprise contribution last week, y'all have demonstrated more than enough interest in the idea of getting TH01 done sooner rather than later. And I agree – after all, we've got the 25th anniversary of its first public release coming up on August 15, and I might still manage to completely decompile this game by that point…

📝 Posted:
🚚 Summary of:
P0158, P0159
Commits:
bf7bb7e...c0c0ebc, c0c0ebc...e491cd7
💰 Funded by:
Yanga
🏷 Tags:

Of course, Sariel's potentially bloated and copy-pasted code is blocked by even more definitely bloated and copy-pasted code. It's TH01, what did you expect? :tannedcirno:

But even then, TH01's item code is on a new level of software architecture ridiculousness. First, ZUN uses distinct arrays for both types of items, with their own caps of 4 for bomb items, and 10 for point items. Since that obviously makes any type-related switch statement redundant, he also used distinct functions for both types, with copy-pasted boilerplate code. The main per-item update and render function is shared though… and takes every single accessed member of the item structure as its own reference parameter. Like, why, you have a structure, right there?! That's one way to really practice the C++ language concept of passing arbitrary structure fields by mutable reference… :zunpet:
To complete the unwarranted grand generic design of this function, it calls back into per-type collision detection, drop, and collect functions with another three reference parameters. Yeah, why use C++ virtual methods when you can also implement the effectively same polymorphism functionality by hand? Oh, and the coordinate clamping code in one of these callbacks could only possibly have come from nested min() and max() preprocessor macros. And that's how you extend such dead-simple functionality to 1¼ pushes…

Amidst all this jank, we've at least got a sensible item↔player hitbox this time, with 24 pixels around Reimu's center point to the left and right, and extending from 24 pixels above Reimu down to the bottom of the playfield. It absolutely didn't look like that from the initial naive decompilation though. Changing entity coordinates from left/top to center was one of the better lessons from TH01 that ZUN implemented in later games, it really makes collision detection code much more intuitive to grasp.


The card flip code is where we find out some slightly more interesting aspects about item drops in this game, and how they're controlled by a hidden cycle variable:

Then again, score players largely ignore point items anyway, as card combos simply have a much bigger effect on the score. With this, I should have RE'd all information necessary to construct a tool-assisted score run, though?
Edit: Turns out that 1) point items are becoming increasingly important in score runs, and 2) Pearl already did a TAS some months ago. Thanks to spaztron64 for the info!

The Orb↔card hitbox also makes perfect sense, with 24 pixels around the center point of a card in every direction.

The rest of the code confirms the card flip score formula documented on Touhou Wiki, as well as the way cards are flipped by bombs: During every of the 90 "damaging" frames of the 140-frame bomb animation, there is a 75% chance to flip the card at the [bomb_frame % total_card_count_in_stage] array index. Since stages can only have up to 50 cards 📝 thanks to a bug, even a 75% chance is high enough to typically flip most cards during a bomb. Each of these flips still only removes a single card HP, just like after a regular collision with the Orb.
Also, why are the card score popups rendered before the cards themselves? That's two needless frames of flicker during that 25-frame animation. Not all too noticeable, but still.


And that's over 50% of REIIDEN.EXE decompiled as well! Next up: More HUD update and rendering code… with a direct dependency on rank pellet speed modifications?

📝 Posted:
🚚 Summary of:
P0149, P0150, P0151, P0152
Commits:
e1a26bb...05e4c4a, 05e4c4a...768251d, 768251d...4d24ca5, 4d24ca5...81fc861
💰 Funded by:
Blue Bolt, Ember2528, -Tom-, [Anonymous]
🏷 Tags:

…or maybe not that soon, as it would have only wasted time to untangle the bullet update commits from the rest of the progress. So, here's all the bullet spawning code in TH04 and TH05 instead. I hope you're ready for this, there's a lot to talk about!

(For the sake of readability, "bullets" in this blog post refers to the white 8×8 pellets and all 16×16 bullets loaded from MIKO16.BFT, nothing else.)


But first, what was going on 📝 in 2020? Spent 4 pushes on the basic types and constants back then, still ended up confusing a couple of things, and even getting some wrong. Like how TH05's "bullet slowdown" flag actually always prevents slowdown and fires bullets at a constant speed instead. :tannedcirno: Or how "random spread" is not the best term to describe that unused bullet group type in TH04.
Or that there are two distinct ways of clearing all bullets on screen, which deserve different names:

Mechanic #1: Clearing bullets for a custom amount of time, awarding 1000 points for all bullets alive on the first frame, and 100 points for all bullets spawned during the clear time.
Mechanic #2: Zapping bullets for a fixed 16 frames, awarding a semi-exponential and loudly announced Bonus!! for all bullets alive on the first frame, and preventing new bullets from being spawned during those 16 frames. In TH04 at least; thanks to a ZUN bug, zapping got reduced to 1 frame and no animation in TH05…

Bullets are zapped at the end of most midboss and boss phases, and cleared everywhere else – most notably, during bombs, when losing a life, or as rewards for extends or a maximized Dream bonus. The Bonus!! points awarded for zapping bullets are calculated iteratively, so it's not trivial to give an exact formula for these. For a small number 𝑛 of bullets, it would exactly be 5𝑛³ - 10𝑛² + 15𝑛 points – or, using uth05win's (correct) recursive definition, Bonus(𝑛) = Bonus(𝑛-1) + 15𝑛² - 5𝑛 + 10. However, one of the internal step variables is capped at a different number of points for each difficulty (and game), after which the points only increase linearly. Hence, "semi-exponential".


On to TH04's bullet spawn code then, because that one can at least be decompiled. And immediately, we have to deal with a pointless distinction between regular bullets, with either a decelerating or constant velocity, and special bullets, with preset velocity changes during their lifetime. That preset has to be set somewhere, so why have separate functions? In TH04, this separation continues even down to the lowest level of functions, where values are written into the global bullet array. TH05 merges those two functions into one, but then goes too far and uses self-modifying code to save a grand total of two local variables… Luckily, the rest of its actual code is identical to TH04.

Most of the complexity in bullet spawning comes from the (thankfully shared) helper function that calculates the velocities of the individual bullets within a group. Both games handle each group type via a large switch statement, which is where TH04 shows off another Turbo C++ 4.0 optimization: If the range of case values is too sparse to be meaningfully expressed in a jump table, it usually generates a linear search through a second value table. But with the -G command-line option, it instead generates branching code for a binary search through the set of cases. 𝑂(log 𝑛) as the worst case for a switch statement in a C++ compiler from 1994… that's so cool. But still, why are the values in TH04's group type enum all over the place to begin with? :onricdennat:
Unfortunately, this optimization is pretty rare in PC-98 Touhou. It only shows up here and in a few places in TH02, compared to at least 50 switch value tables.

In all of its micro-optimized pointlessness, TH05's undecompilable version at least fixes some of TH04's redundancy. While it's still not even optimal, it's at least a decently written piece of ASM… if you take the time to understand what's going on there, because it certainly took quite a bit of that to verify that all of the things which looked like bugs or quirks were in fact correct. And that's how the code for this function ended up with 35% comments and blank lines before I could confidently call it "reverse-engineered"…
Oh well, at least it finally fixes a correctness issue from TH01 and TH04, where an invalid bullet group type would fill all remaining slots in the bullet array with identical versions of the first bullet.

Something that both games also share in these functions is an over-reliance on globals for return values or other local state. The most ridiculous example here: Tuning the speed of a bullet based on rank actually mutates the global bullet template… which ZUN then works around by adding a wrapper function around both regular and special bullet spawning, which saves the base speed before executing that function, and restores it afterward. :zunpet: Add another set of wrappers to bypass that exact tuning, and you've expanded your nice 1-function interface to 4 functions. Oh, and did I mention that TH04 pointlessly duplicates the first set of wrapper functions for 3 of the 4 difficulties, which can't even be explained with "debugging reasons"? That's 10 functions then… and probably explains why I've procrastinated this feature for so long.

At this point, I also finally stopped decompiling ZUN's original ASM just for the sake of it. All these small TH05 functions would look horribly unidiomatic, are identical to their decompiled TH04 counterparts anyway, except for some unique constant… and, in the case of TH05's rank-based speed tuning function, actually become undecompilable as soon as we want to return a C++ class to preserve the semantic meaning of the return value. Mainly, this is because Turbo C++ does not allow register pseudo-variables like _AX or _AL to be cast into class types, even if their size matches. Decompiling that function would have therefore lowered the quality of the rest of the decompiled code, in exchange for the additional maintenance and compile-time cost of another translation unit. Not worth it – and for a TH05 port, you'd already have to decompile all the rest of the bullet spawning code anyway!


The only thing in there that was still somewhat worth being decompiled was the pre-spawn clipping and collision detection function. Due to what's probably a micro-optimization mistake, the TH05 version continues to spawn a bullet even if it was spawned on top of the player. This might sound like it has a different effect on gameplay… until you realize that the player got hit in this case and will either lose a life or deathbomb, both of which will cause all on-screen bullets to be cleared anyway. So it's at most a visual glitch.

But while we're at it, can we please stop talking about hitboxes? At least in the context of TH04 and TH05 bullets. The actual collision detection is described way better as a kill delta of 8×8 pixels between the center points of the player and a bullet. You can distribute these pixels to any combination of bullet and player "hitboxes" that make up 8×8. 4×4 around both the player and bullets? 1×1 for bullets, and 8×8 for the player? All equally valid… or perhaps none of them, once you keep in mind that other entity types might have different kill deltas. With that in mind, the concept of a "hitbox" turns into just a confusing abstraction.

The same is true for the 36×44 graze box delta. For some reason, this one is not exactly around the center of a bullet, but shifted to the right by 2 pixels. So, a bullet can be grazed up to 20 pixels right of the player, but only up to 16 pixels left of the player. uth05win also spotted this… and rotated the deltas clockwise by 90°?!


Which brings us to the bullet updates… for which I still had to research a decompilation workaround, because 📝 P0148 turned out to not help at all? Instead, the solution was to lie to the compiler about the true segment distance of the popup function and declare its signature far rather than near. This allowed ZUN to save that ridiculous overhead of 1 additional far function call/return per frame, and those precious 2 bytes in the BSS segment that he didn't have to spend on a segment value. 📝 Another function that didn't have just a single declaration in a common header file… really, 📝 how were these games even built???

The function itself is among the longer ones in both games. It especially stands out in the indentation department, with 7 levels at its most indented point – and that's the minimum of what's possible without goto. Only two more notable discoveries there:

  1. Bullets are the only entity affected by Slow Mode. If the number of bullets on screen is ≥ (24 + (difficulty * 8) + rank) in TH04, or (42 + (difficulty * 8)) in TH05, Slow Mode reduces the frame rate by 33%, by waiting for one additional VSync event every two frames.
    The code also reveals a second tier, with 50% slowdown for a slightly higher number of bullets, but that conditional branch can never be executed :zunpet:
  2. Bullets must have been grazed in a previous frame before they can be collided with. (Note how this does not apply to bullets that spawned on top of the player, as explained earlier!)

Whew… When did ReC98 turn into a full-on code review?! 😅 And after all this, we're still not done with TH04 and TH05 bullets, with all the special movement types still missing. That should be less than one push though, once we get to it. Next up: Back to TH01 and Konngara! Now have fun rewriting the Touhou Wiki Gameplay pages 😛

📝 Posted:
🚚 Summary of:
P0092, P0093, P0094
Commits:
29c5a73...4403308, 4403308...0e73029, 0e73029...57a8487
💰 Funded by:
Yanga, Ember2528
🏷 Tags:

Three pushes to decompile the TH01 high score menu… because it's completely terrible, and needlessly complicated in pretty much every aspect:

In the end, I just gave up with my usual redundancy reduction efforts for this one. Anyone wanting to change TH01's high score name entering code would be better off just rewriting the entire thing properly.

And that's all of the shared code in TH01! Both OP.EXE and FUUIN.EXE are now only missing the actual main menu and ending code, respectively. Next up, though: The long awaited TH01 PI push. Which will not only deliver 100% PI for OP.EXE and FUUIN.EXE, but also probably quite some gains in REIIDEN.EXE. With now over 30% of the game decompiled, it's about time we get to look at some gameplay code!

📝 Posted:
🚚 Summary of:
P0063
Commits:
034ae4b...8dbb450
💰 Funded by:
-Tom-
🏷 Tags:

Almost!

Just like most of the time, it was more sensible to cover GENSOU.SCR, the last structure missing in TH05's OP.EXE, everywhere it's used, rather than just rushing out OP.EXE position independence. I did have to look into all of the functions to fully RE it after all, and to find out whether the unused fields actually are unused. The only thing that kept this push from yielding even more above-average progress was the sheer inconsistency in how the games implemented the operations on this PC-98 equivalent of score*.dat:

Technically though, TH05's OP.EXE is position-independent now, and the rest are (should be? :tannedcirno:) merely false positives. However, TH04's is still missing another structure, in addition to its false positives. So, let's wait with the big announcement until the next push… which will also come with a demo video of what will be possible then.

📝 Posted:
🚚 Summary of:
P0031, P0032, P0033
Commits:
dea40ad...9f764fa, 9f764fa...e6294c2, e6294c2...6cdd229
💰 Funded by:
zorg
🏷 Tags:

The glacial pace continues, with TH05's unnecessarily, inappropriately micro-optimized, and hence, un-decompilable code for rendering the current and high score, as well as the enemy health / dream / power bars. While the latter might still pass as well-written ASM, the former goes to such ridiculous levels that it ends up being technically buggy. If you enjoy quality ZUN code, it's definitely worth a read.

In TH05, this all still is at the end of code segment #1, but in TH04, the same code lies all over the same segment. And since I really wanted to move that code into its final form now, I finally did the research into decompiling from anywhere else in a segment.

Turns out we actually can! It's kinda annoying, though: After splitting the segment after the function we want to decompile, we then need to group the two new segments back together into one "virtual segment" matching the original one. But since all ASM in ReC98 heavily relies on being assembled in MASM mode, we then start to suffer from MASM's group addressing quirk. Which then forces us to manually prefix every single function call

with the group name. It's stupidly boring busywork, because of all the function calls you mustn't prefix. Special tooling might make this easier, but I don't have it, and I'm not getting crowdfunded for it.

So while you now definitely can request any specific thing in any of the 5 games to be decompiled right now, it will take slightly longer, and cost slightly more.
(Except for that one big segment in TH04, of course.)

Only one function away from the TH05 shot type control functions now!