What's this? A simple, straightforward, easy-to-decompile TH01 boss with
just a few minor quirks and only two rendering-related ZUN bugs? Yup, 2½
pushes, and Kikuri was done. Let's get right into the overview:
Just like 📝 Elis, Kikuri's fight consists
of 5 phases, excluding the entrance animation. For some reason though, they
are numbered from 2 to 6 this time, skipping phase 1? For consistency, I'll
use the original phase numbers from the source code in this blog post.
The main phases (2, 5, and 6) also share Elis' HP boundaries of 10, 6,
and 0, respectively, and are once again indicated by different colors in the
HP bar. They immediately end upon reaching the given number of HP, making
Kikuri immune to the
📝 heap corruption in test or debug mode that can happen with Elis and Konngara.
Phase 2 solely consists of the infamous big symmetric spiral
pattern.
Phase 3 fades Kikuri's ball of light from its default bluish color to bronze over 100 frames. Collision detection is deactivated
during this phase.
In Phase 4, Kikuri activates her two souls while shooting the spinning
8-pellet circles from the previously activated ball. The phase ends shortly
after the souls fired their third spread pellet group.
Note that this is a timed phase without an HP boundary, which makes
it possible to reduce Kikuri's HP below the boundaries of the next
phases, effectively skipping them. Take this video for example,
where Kikuri has 6 HP by the end of Phase 4, and therefore directly
starts Phase 6.
(Obviously, Kikuri's HP can also be reduced to 0 or below, which will
end the fight immediately after this phase.)
Phase 5 combines the teardrop/ripple "pattern" from the souls with the
"two crossed eye laser" pattern, on independent cycles.
Finally, Kikuri cycles through her remaining 4 patterns in Phase 6,
while the souls contribute single aimed pellets every 200 frames.
Interestingly, all HP-bounded phases come with an additional hidden
timeout condition:
Phase 2 automatically ends after 6 cycles of the spiral pattern, or
5,400 frames in total.
Phase 5 ends after 1,600 frames, or the first frame of the
7th cycle of the two crossed red lasers.
If you manage to keep Kikuri alive for 29 of her Phase 6 patterns,
her HP are automatically set to 1. The HP bar isn't redrawn when this
happens, so there is no visual indication of this timeout condition even
existing – apart from the next Orb hit ending the fight regardless of
the displayed HP. Due to the deterministic order of patterns, this
always happens on the 8th cycle of the "symmetric gravity
pellet lines from both souls" pattern, or 11,800 frames. If dodging and
avoiding orb hits for 3½ minutes sounds tiring, you can always watch the
byte at DS:0x1376 in your emulator's memory viewer. Once
it's at 0x1E, you've reached this timeout.
So yeah, there's your new timeout challenge.
The few issues in this fight all relate to hitboxes, starting with the main
one of Kikuri against the Orb. The coordinates in the code clearly describe
a hitbox in the upper center of the disc, but then ZUN wrote a < sign
instead of a > sign, resulting in an in-game hitbox that's not
quite where it was intended to be…
Much worse, however, are the teardrop ripples. It already starts with their
rendering routine, which places the sprites from TAMAYEN.PTN
at byte-aligned VRAM positions in the ultimate piece of if(…) {…}
else if(…) {…} else if(…) {…} meme code. Rather than
tracking the position of each of the five ripple sprites, ZUN suddenly went
purely functional and manually hardcoded the exact rendering and collision
detection calls for each frame of the animation, based on nothing but its
total frame counter.
Each of the (up to) 5 columns is also unblitted and blitted individually
before moving to the next column, starting at the center and then
symmetrically moving out to the left and right edges. This wouldn't be a
problem if ZUN's EGC-powered unblitting function didn't word-align its X
coordinates to a 16×1 grid. If the ripple sprites happen to start at an
odd VRAM byte position, their unblitting coordinates get rounded both down
and up to the nearest 16 pixels, thus touching the adjacent 8 pixels of the
previously blitted columns and leaving the well-known black vertical bars in
their place.
OK, so where's the hitbox issue here? If you just look at the raw
calculation, it's a slightly confusingly expressed, but perfectly logical 17
pixels. But this is where byte-aligned blitting has a direct effect on
gameplay: These ripples can be spawned at any arbitrary, non-byte-aligned
VRAM position, and collisions are calculated relative to this internal
position. Therefore, the actual hitbox is shifted up to 7 pixels to the
right, compared to where you would expect it from a ripple sprite's
on-screen position:
We've previously seen the same issue with the
📝 shot hitbox of Elis' bat form, where
pixel-perfect collision detection against a byte-aligned sprite was merely a
sidenote compared to the more serious X=Y coordinate bug. So why do I
elevate it to bug status here? Because it directly affects dodging: Reimu's
regular movement speed is 4 pixels per frame, and with the internal position
of an on-screen ripple sprite varying by up to 7 pixels, any micrododging
(or "grazing") attempt turns into a coin flip. It's sort of mitigated
by the fact that Reimu is also only ever rendered at byte-aligned
VRAM positions, but I wouldn't say that these two bugs cancel out each
other.
Oh well, another set of rendering issues to be fixed in the hypothetical
Anniversary Edition – obviously, the hitboxes should remain unchanged. Until
then, you can always memorize the exact internal positions. The sequence of
teardrop spawn points is completely deterministic and only controlled by the
fixed per-difficulty spawn interval.
Aside from more minor coordinate inaccuracies, there's not much of interest
in the rest of the pattern code. In another parallel to Elis though, the
first soul pattern in phase 4 is aimed on every difficulty except
Lunatic, where the pellets are once again statically fired downwards. This
time, however, the pattern's difficulty is much more appropriately
distributed across the four levels, with the simultaneous spinning circle
pellets adding a constant aimed component to every difficulty level.
That brings us to 5 fully decompiled PC-98 Touhou bosses, with 26 remaining…
and another ½ of a push going to the cutscene code in
FUUIN.EXE.
You wouldn't expect something as mundane as the boss slideshow code to
contain anything interesting, but there is in fact a slight bit of
speculation fuel there. The text typing functions take explicit string
lengths, which precisely match the corresponding strings… for the most part.
For the "Gatekeeper 'SinGyoku'" string though, ZUN passed 23
characters, not 22. Could that have been the "h" from the Hepburn
romanization of 神玉?!
Also, come on, if this text is already blitted to VRAM for no reason,
you could have gone for perfect centering at unaligned byte positions; the
rendering function would have perfectly supported it. Instead, the X
coordinates are still rounded up to the nearest byte.
The hardcoded ending cutscene functions should be even less interesting –
don't they just show a bunch of images followed by frame delays? Until they
don't, and we reach the 地獄/Jigoku Bad Ending with
its special shake/"boom" effect, and this picture:
Which is rendered by the following code:
for(int i = 0; i <= boom_duration; i++) { // (yes, off-by-one)
if((i & 3) == 0) {
graph_scrollup(8);
} else {
graph_scrollup(0);
}
end_pic_show(1); // ← different picture is rendered
frame_delay(2); // ← blocks until 2 VSync interrupts have occurred
if(i & 1) {
end_pic_show(2); // ← picture above is rendered
} else {
end_pic_show(1);
}
}
Notice something? You should never see this picture because it's
immediately overwritten before the frame is supposed to end. And yet
it's clearly flickering up for about one frame with common emulation
settings as well as on my real PC-9821 Nw133, clocked at 133 MHz.
master.lib's graph_scrollup() doesn't block until VSync either,
and removing these calls doesn't change anything about the blitted images.
end_pic_show() uses the EGC to blit the given 320×200 quarter
of VRAM from page 1 to the visible page 0, so the bottleneck shouldn't be
there either…
…or should it? After setting it up via a few I/O port writes, the common
method of EGC-powered blitting works like this:
Read 16 bits from the source VRAM position on any single
bitplane. This fills the EGC's 4 16-bit tile registers with the VRAM
contents at that specific position on every bitplane. You do not care
about the value the CPU returns from the read – in optimized code, you would
make sure to just read into a register to avoid useless additional stores
into local variables.
Write any 16 bits
to the target VRAM position on any single bitplane. This copies the
contents of the EGC's tile registers to that specific position on
every bitplane.
To transfer pixels from one VRAM page to another, you insert an additional
write to I/O port 0xA6 before 1) and 2) to set your source and
destination page… and that's where we find the bottleneck. Taking a look at
the i486 CPU and its cycle
counts, a single one of these page switches costs 17 cycles – 1 for
MOVing the page number into AL, and 16 for the
OUT instruction itself. Therefore, the 8,000 page switches
required for EGC-copying a 320×200-pixel image require 136,000 cycles in
total.
And that's the optimal case of using only those two
instructions. 📝 As I implied last time, TH01
uses a function call for VRAM page switches, complete with creating
and destroying a useless stack frame and unnecessarily updating a global
variable in main memory. I tried optimizing ZUN's code by throwing out
unnecessary code and using 📝 pseudo-registers
to generate probably optimal assembly code, and that did speed up the
blitting to almost exactly 50% of the original version's run time. However,
it did little about the flickering itself. Here's a comparison of the first
loop with boom_duration = 16, recorded in DOSBox-X with
cputype=auto and cycles=max, and with
i overlaid using the text chip. Caution, flashing lights:
I pushed the optimized code to the th01_end_pic_optimize
branch, to also serve as an example of how to get close to optimal code out
of Turbo C++ 4.0J without writing a single ASM instruction.
And if you really want to use the EGC for this, that's the best you can do.
It really sucks that it merely expanded the GRCG's 4×8-bit tile register to
4×16 bits. With 32 bits, ≥386 CPUs could have taken advantage of their wider
registers and instructions to double the blitting performance. Instead, we
now know the reason why
📝 Promisence Soft's EGC-powered sprite driver that ZUN later stole for TH03
is called SPRITE16 and not SPRITE32. What a massive disappointment.
But what's perhaps a bigger surprise: Blitting planar
images from main memory is much faster than EGC-powered inter-page
VRAM copies, despite the required manual access to all 4 bitplanes. In
fact, the blitting functions for the .CDG/.CD2 format, used from TH03
onwards, would later demonstrate the optimal method of using REP
MOVSD for blitting every line in 32-pixel chunks. If that was also
used for these ending images, the core blitting operation would have taken
((12 + (3 × (320 / 32))) × 200 × 4) =
33,600 cycles, with not much more overhead for the surrounding row
and bitplane loops. Sure, this doesn't factor in the whole infamous issue of
VRAM being slow on PC-98, but the aforementioned 136,000 cycles don't even
include any actual blitting either. And as you move up to later PC-98
models with Pentium CPUs, the gap between OUT and REP
MOVSD only becomes larger. (Note that the page I linked above has a
typo in the cycle count of REP MOVSD on Pentium CPUs: According
to the original Intel Architecture and Programming Manual, it's
13+𝑛, not 3+𝑛.)
This difference explains why later games rarely use EGC-"accelerated"
inter-page VRAM copies, and keep all of their larger images in main memory.
It especially explains why TH04 and TH05 can get away with naively redrawing
boss backdrop images on every frame.
In the end, the whole fact that ZUN did not define how long this image
should be visible is enough for me to increment the game's overall bug
counter. Who would have thought that looking at endings of all things
would teach us a PC-98 performance lesson… Sure, optimizing TH01 already
seemed promising just by looking at its bloated code, but I had no idea that
its performance issues extended so far past that level.
That only leaves the common beginning part of all endings and a short
main() function before we're done with FUUIN.EXE,
and 98 functions until all of TH01 is decompiled! Next up: SinGyoku, who not
only is the quickest boss to defeat in-game, but also comes with the least
amount of code. See you very soon!
With Elis, we've not only reached the midway point in TH01's boss code, but
also a bunch of other milestones: Both REIIDEN.EXE and TH01 as
a whole have crossed the 75% RE mark, and overall position independence has
also finally cracked 80%!
And it got done in 4 pushes again? Yup, we're back to
📝 Konngara levels of redundancy and
copy-pasta. This time, it didn't even stop at the big copy-pasted code
blocks for the rift sprite and 256-pixel circle animations, with the words
"redundant" and "unnecessary" ending up a total of 18 times in my source
code comments.
But damn is this fight broken. As usual with TH01 bosses, let's start with a
high-level overview:
The Elis fight consists of 5 phases (excluding the entrance animation),
which must be completed in order.
In all odd-numbered phases, Elis uses a random one-shot danmaku pattern
from an exclusive per-phase pool before teleporting to a random
position.
There are 3 exclusive girl-form patterns per phase, plus 4
additional bat-form patterns in phase 5, for a total of 13.
Due to a quirk in the selection algorithm in phases 1 and 3, there
is a 25% chance of Elis skipping an attack cycle and just teleporting
again.
In contrast to Konngara, Elis can freely select the same pattern
multiple times in a row. There's nothing in the code to prevent that
from happening.
This pattern+teleport cycle is repeated until Elis' HP reach a certain
threshold value. The odd-numbered phases correspond to the white (phase 1),
red-white (phase 3), and red (phase 5) sections of the health bar. However,
the next phase can only start at the end of each cycle, after a
teleport.
Phase 2 simply teleports Elis back to her starting screen position of
(320, 144) and then advances to phase 3.
Phase 4 does the same as phase 2, but adds the initial bat form
transformation before advancing to phase 5.
Phase 5 replaces the teleport with a transformation to the bat form.
Rather than teleporting instantly to the target position, the bat gradually
flies there, firing a randomly selected looping pattern from the 4-pattern
bat pool on the way, before transforming back to the girl form.
This puts the earliest possible end of the fight at the first frame of phase
5. However, nothing prevents Elis' HP from reaching 0 before that point. You
can nicely see this in 📝 debug mode: Wait
until the HP bar has filled up to avoid heap corruption, hold ↵ Return
to reduce her HP to 0, and watch how Elis still goes through a total of
two patterns* and four
teleport animations before accepting defeat.
But wait, heap corruption? Yup, there's a bug in the HP bar that already
affected Konngara as well, and it isn't even just about the graphical
glitches generated by negative HP:
The initial fill-up animation is drawn to both VRAM pages at a rate of 1
HP per frame… by passing the current frame number as the
current_hp number.
The target_hp is indicated by simply passing the current
HP…
… which, however, can be reduced in debug mode at an equal rate of up to
1 HP per frame.
The completion condition only checks if
((target_hp - 1) == current_hp). With the
right timing, both numbers can therefore run past each other.
In that case, the function is repeatedly called on every frame, backing
up the original VRAM contents for the current HP point before blitting
it…
… until frame ((96 / 2) + 1), where the
.PTN slot pointer overflows the heap buffer and overwrites whatever comes
after. 📝 Sounds familiar, right?
Since Elis starts with 14 HP, which is an even number, this corruption is
trivial to cause: Simply hold ↵ Return from the beginning of the
fight, and the completion condition will never be true, as the
HP and frame numbers run past the off-by-one meeting point.
Regular gameplay, however, entirely prevents this due to the fixed start
positions of Reimu and the Orb, the Orb's fixed initial trajectory, and the
50 frames of delay until a bomb deals damage to a boss. These aspects make
it impossible to hit Elis within the first 14 frames of phase 1, and ensure
that her HP bar is always filled up completely. So ultimately, this bug ends
up comparable in seriousness to the
📝 recursion / stack overflow bug in the memory info screen.
These wavy teleport animations point to a quite frustrating architectural
issue in this fight. It's not even the fact that unblitting the yellow star
sprites rips temporary holes into Elis' sprite; that's almost expected from
TH01 at this point. Instead, it's all because of this unused frame of the
animation:
With this sprite still being part of BOSS5.BOS, Girl-Elis has a
total of 9 animation frames, 1 more than the
📝 8 per-entity sprites allowed by ZUN's architecture.
The quick and easy solution would have been to simply bump the sprite array
size by 1, but… nah, this would have added another 20 bytes to all 6 of the
.BOS image slots. Instead, ZUN wrote the manual
position synchronization code I mentioned in that 2020 blog post.
Ironically, he then copy-pasted this snippet of code often enough that it
ended up taking up more than 120 bytes in the Elis fight alone – with, you
guessed it, some of those copies being redundant. Not to mention that just
going from 8 to 9 sprites would have allowed ZUN to go down from 6 .BOS
image slots to 3. That would have actually saved 420 bytes in
addition to the manual synchronization trouble. Looking forward to SinGyoku,
that's going to be fun again…
As for the fight itself, it doesn't take long until we reach its most janky
danmaku pattern, right in phase 1:
For whatever reason, the lower-right quarter of the circle isn't
animated? This animation works by only drawing the new dots added with every
subsequent animation frame, expressed as a tiny arc of a dotted circle. This
arc starts at the animation's current 8-bit angle and ends on the sum of
that angle and a hardcoded constant. In every other (copy-pasted, and
correct) instance of this animation, ZUN uses 0x02 as the
constant, but this one uses… 0.05 for the lower-right quarter?
As in, a 64-bit double constant that truncates to 0 when added
to an 8-bit integer, thus leading to the start and end angles being
identical and the game not drawing anything.
On Easy and Normal, the pattern then spawns 32 bullets along the outline
of the circle, no problem there. On Lunatic though, every one of these
bullets is instead turned into a narrow-angled 5-spread, resulting in 160
pellets… in a game with a pellet cap of 100.
Now, if Elis teleported herself to a position near the top of the playfield,
most of the capped pellets would have been clipped at that top edge anyway,
since the bullets are spawned in clockwise order starting at Elis' right
side with an angle of 0x00. On lower positions though, you can
definitely see a difference if the cap were high enough to allow all coded
pellets to actually be spawned.
The Hard version gets dangerously close to the cap by spawning a total of 96
pellets. Since this is the only pattern in phase 1 that fires pellets
though, you are guaranteed to see all of the unclipped ones.
The pellets also aren't spawned exactly on the telegraphed circle, but 4 pixels to the left.
Then again, it might very well be that all of this was intended, or, most
likely, just left in the game as a happy accident. The latter interpretation
would explain why ZUN didn't just delete the rendering calls for the
lower-right quarter of the circle, because seriously, how would you not spot
that? The phase 3 patterns continue with more minor graphical glitches that
aren't even worth talking about anymore.
And then Elis transforms into her bat form at the beginning of Phase 5,
which displays some rather unique hitboxes. The one against the Orb is fine,
but the one against player shots…
… uses the bat's X coordinate for both X and Y dimensions.
In regular gameplay, it's not too bad as most
of the bat patterns fire aimed pellets which typically don't allow you to
move below her sprite to begin with. But if you ever tried destroying these
pellets while standing near the middle of the playfield, now you know why
that didn't work. This video also nicely points out how the bat, like any
boss sprite, is only ever blitted at positions on the 8×1-pixel VRAM byte
grid, while collision detection uses the actual pixel position.
The bat form patterns are all relatively simple, with little variation
depending on the difficulty level, except for the "slow pellet spreads"
pattern. This one is almost easiest to dodge on Lunatic, where the 5-spreads
are not only always fired downwards, but also at the hardcoded narrow delta
angle, leaving plenty of room for the player to move out of the way:
Finally, we've got another potential timesave in the girl form's "safety
circle" pattern:
After the circle spawned completely, you lose a life by moving outside it,
but doing that immediately advances the pattern past the circle part. This
part takes 200 frames, but the defeat animation only takes 82 frames, so
you can save up to 118 frames there.
Final funny tidbit: As with all dynamic entities, this circle is only
blitted to VRAM page 0 to allow easy unblitting. However, it's also kind of
static, and there needs to be some way to keep the Orb, the player shots,
and the pellets from ripping holes into it. So, ZUN just re-blits the circle
every… 4 frames?! 🤪 The same is true for the Star of David and its
surrounding circle, but there you at least get a flash animation to justify
it. All the overlap is actually quite a good reason for not even attempting
to 📝 mess with the hardware color palette instead.
Reproducing the crash was the whole challenge here. Even after moving Elis
and Reimu to the exact positions seen in Pearl's video and setting Elis' HP
to 0 on the exact same frame, everything ran fine for me. It's definitely no
division by 0 this time, the function perfectly guards against that
possibility. The line specified in the function's parameters is always
clipped to the VRAM region as well, so we can also rule out illegal memory
accesses here…
… or can we? Stepping through it all reminded me of how this function brings
unblitting sloppiness to the next level: For each VRAM byte touched, ZUN
actually unblits the 4 surrounding bytes, adding one byte to the left
and two bytes to the right, and using a single 32-bit read and write per
bitplane. So what happens if the function tries to unblit the topmost byte
of VRAM, covering the pixel positions from (0, 0) to (7, 0)
inclusive? The VRAM offset of 0x0000 is decremented to
0xFFFF to cover the one byte to the left, 4 bytes are written
to this address, the CPU's internal offset overflows… and as it turns out,
that is illegal even in Real Mode as of the 80286, and will raise a General Protection
Fault. Which is… ignored by DOSBox-X,
every Neko Project II version in common use, the CSCP
emulators, SL9821, and T98-Next. Only Anex86 accurately emulates the
behavior of real hardware here.
OK, but no laser fired by Elis ever reaches the top-left corner of the
screen. How can such a fault even happen in practice? That's where the
broken laser reset+unblit function comes in: Not only does it just flat out pass the wrong
parameters to the line unblitting function – describing the line
already traveled by the laser and stopping where the laser begins –
but it also passes them
wrongly, in the form of raw 32-bit fixed-point Q24.8 values, with no
conversion other than a truncation to the signed 16-bit pixels expected by
the function. What then follows is an attempt at interpolation and clipping
to find a line segment between those garbage coordinates that actually falls
within the boundaries of VRAM:
right/bottom correspond to a laser's origin position, and
left/top to the leftmost pixel of its moved-out top line. The
bug therefore only occurs with lasers that stopped growing and have started
moving.
Moreover, it will only happen if either (left % 256) or
(right % 256) is ≤ 127 and the other one of the two is ≥ 128.
The typecast to signed 16-bit integers then turns the former into a large
positive value and the latter into a large negative value, triggering the
function's clipping code.
The function then follows Bresenham's
algorithm: left is ensured to be smaller than right
by swapping the two values if necessary. If that happened, top
and bottom are also swapped, regardless of their value – the
algorithm does not care about their order.
The slope in the X dimension is calculated using an integer division of
((bottom - top) /
(right - left)). Both subtractions are done on signed
16-bit integers, and overflow accordingly.
(-left × slope_x) is added to top,
and left is set to 0.
If both top and bottom are < 0 or
≥ 640, there's nothing to be unblitted. Otherwise, the final
coordinates are clipped to the VRAM range of [(0, 0),
(639, 399)].
If the function got this far, the line to be unblitted is now very
likely to reach from
the top-left to the bottom-right corner, starting out at
(0, 0) right away, or
from the bottom-left corner to the top-right corner. In this case,
you'd expect unblitting to end at (639, 0), but thanks to an
off-by-one error,
it actually ends at (640, -1), which is equivalent to
(0, 0). Why add clipping to VRAM offset calculations when
everything else is clipped already, right?
tl;dr: TH01 has a high chance of freezing at a boss defeat sequence if there
are diagonally moving lasers on screen, and if your PC-98 system
raises a General Protection Fault on a 4-byte write to offset
0xFFFF, and if you don't run a TSR with an INT
0Dh handler that might handle this fault differently.
The easiest fix option would be to just remove the attempted laser
unblitting entirely, but that would also have an impact on this game's…
distinctive visual glitches, in addition to touching a whole lot of
code bytes. If I ever get funded to work on a hypothetical TH01 Anniversary
Edition that completely rearchitects the game to fix all these glitches, it
would be appropriate there, but not for something that purports to be the
original game.
(Sidenote to further hype up this Anniversary Edition idea for PC-98
hardware owners: With the amount of performance left on the table at every
corner of this game, I'm pretty confident that we can get it to work
decently on PC-98 models with just an 80286 CPU.)
Since we're in critical infrastructure territory once again, I went for the
most conservative fix with the least impact on the binary: Simply changing
any VRAM offsets >= 0xFFFD to 0x0000 to avoid
the GPF, and leaving all other bugs in place. Sure, it's rather lazy and
"incorrect"; the function still unblits a 32-pixel block there, but adding a
special case for blitting 24 pixels would add way too much code. And
seriously, it's not like anything happens in the 8 pixels between
(24, 0) and (31, 0) inclusive during gameplay to begin with.
To balance out the additional per-row if() branch, I inlined
the VRAM page change I/O, saving two function calls and one memory write per
unblitted row.
That means it's time for a new community_choice_fixes
build, containing the new definitive bugfixed versions of these games:
2022-05-31-community-choice-fixes.zip
Check the th01_critical_fixes
branch for the modified TH01 code. It also contains a fix for the HP bar
heap corruption in test or debug mode – simply changing the ==
comparison to <= is enough to avoid it, and negative HP will
still create aesthetic glitch art.
Once again, I then was left with ½ of a push, which I finally filled with
some FUUIN.EXE code, specifically the verdict screen. The most
interesting part here is the player title calculation, which is quite
sneaky: There are only 6 skill levels, but three groups of
titles for each level, and the title you'll see is picked from a random
group. It looks like this is the first time anyone has documented the
calculation?
As for the levels, ZUN definitely didn't expect players to do particularly
well. With a 1cc being the standard goal for completing a Touhou game, it's
especially funny how TH01 expects you to continue a lot: The code has
branches for up to 21 continues, and the on-screen table explicitly leaves
room for 3 digits worth of continues per 5-stage scene. Heck, these
counts are even stored in 32-bit long variables.
Next up: 📝 Finally finishing the long
overdue Touhou Patch Center MediaWiki update work, while continuing with
Kikuri in the meantime. Originally I wasn't sure about what to do between
Elis and Seihou,
but with Ember2528's surprise
contribution last week, y'all have
demonstrated more than enough interest in the idea of getting TH01 done
sooner rather than later. And I agree – after all, we've got the 25th
anniversary of its first public release coming up on August 15, and I might
still manage to completely decompile this game by that point…
TH05 has passed the 50% RE mark, with both MAIN.EXE and the
game as a whole! With that, we've also reached what -Tom-
wanted out of the project, so he's suspending his discount offer for a
bit.
Curve bullets are now officially called cheetos! 76.7% of
fans prefer this term, and it fits into the 8.3 DOS filename scheme much
better than homing lasers (as they're called in
OMAKE.TXT) or Taito
lasers (which would indeed have made sense as well).
…oh, and I managed to decompile Shinki within 2 pushes after all. That
left enough budget to also add the Stage 1 midboss on top.
So, Shinki! As far as final boss code is concerned, she's surprisingly
economical, with 📝 her background animations
making up more than ⅓ of her entire code. Going straight from TH01's
📝 final📝 bosses
to TH05's final boss definitely showed how much ZUN had streamlined
danmaku pattern code by the end of PC-98 Touhou. Don't get me wrong, there
is still room for improvement: TH05 not only
📝 reuses the same 16 bytes of generic boss state we saw in TH04 last month,
but also uses them 4× as often, and even for midbosses. Most importantly
though, defining danmaku patterns using a single global instance of the
group template structure is just bad no matter how you look at it:
The script code ends up rather bloated, with a single MOV
instruction for setting one of the fields taking up 5 bytes. By comparison,
the entire structure for regular bullets is 14 bytes large, while the
template structure for Shinki's 32×32 ball bullets could have easily been
reduced to 8 bytes.
Since it's also one piece of global state, you can easily forget to set
one of the required fields for a group type. The resulting danmaku group
then reuses these values from the last time they were set… which might have
been as far back as another boss fight from a previous stage.
And of course, I wouldn't point this out if it
didn't actually happen in Shinki's pattern code. Twice.
Declaring a separate structure instance with the static data for every
pattern would be both safer and more space-efficient, and there's
more than enough space left for that in the game's data segment.
But all in all, the pattern functions are short, sweet, and easy to follow.
The "devil"
patternis significantly more complex than the others, but still
far from TH01's final bosses at their worst. I especially like the clear
architectural separation between "one-shot pattern" functions that return
true once they're done, and "looping pattern" functions that
run as long as they're being called from a boss's main function. Not many
all too interesting things in these pattern functions for the most part,
except for two pieces of evidence that Shinki was coded after Yumeko:
The gather animation function in the first two phases contains a bullet
group configuration that looks like it's part of an unused danmaku
pattern. It quickly turns out to just be copy-pasted from a similar function
in Yumeko's fight though, where it is turned into actual
bullets.
As one of the two places where ZUN forgot to set a template field, the
lasers at the end of the white wing preparation pattern reuse the 6-pixel
width of Yumeko's final laser pattern. This actually has an effect on
gameplay: Since these lasers are active for the first 8 frames after
Shinki's wings appear on screen, the player can get hit by them in the last
2 frames after they grew to their final width.
Speaking about that wing sprite: If you look at ST05.BB2 (or
any other file with a large sprite, for that matter), you notice a rather
weird file layout:
And it's not a limitation of the sprite width field in the BFNT+ header
either. Instead, it's master.lib's BFNT functions which are limited to
sprite widths up to 64 pixels… or at least that's what
MASTER.MAN claims. Whatever the restriction was, it seems to be
completely nonexistent as of master.lib version 0.23, and none of the
master.lib functions used by the games have any issues with larger
sprites.
Since ZUN stuck to the supposed 64-pixel width limit though, it's now the
game that expects Shinki's winged form to consist of 4 physical
sprites, not just 1. Any conversion from another, more logical sprite sheet
layout back into BFNT+ must therefore replicate the original number of
sprites. Otherwise, the sequential IDs ("patnums") assigned to every newly
loaded sprite no longer match ZUN's hardcoded IDs, causing the game to
crash. This is exactly what used to happen with -Tom-'s
MysticTK automation scripts,
which combined these exact sprites into a single large one. This issue has
now been fixed – just in case there are some underground modders out there
who used these scripts and wonder why their game crashed as soon as the
Shinki fight started.
And then the code quality takes a nosedive with Shinki's main function.
Even in TH05, these boss and midboss update
functions are still very imperative:
The origin point of all bullet types used by a boss must be manually set
to the current boss/midboss position; there is no concept of a bullet type
tracking a certain entity.
The same is true for the target point of a player's homing shots…
… and updating the HP bar. At least the initial fill animation is
abstracted away rather decently.
Incrementing the phase frame variable also must be done manually. TH05
even "innovates" here by giving the boss update function exclusive ownership
of that variable, in contrast to TH04 where that ownership is given out to
the player shot collision detection (?!) and boss defeat helper
functions.
Speaking about collision detection: That is done by calling different
functions depending on whether the boss is supposed to be invincible or
not.
Timeout conditions? No standard way either, and all done with manual
if statements. In combination with the regular phase end
condition of lowering (mid)boss HP to a certain value, this leads to quite a
convoluted control flow.
The manual calls to the score bonus functions for cleared phases at least provide some sense of orientation.
One potentially nice aspect of all this imperative freedom is that
phases can end outside of HP boundaries… by manually incrementing the
phase variable and resetting the phase frame variable to 0.
The biggest WTF in there, however, goes to using one of the 16 state bytes
as a "relative phase" variable for differentiating between boss phases that
share the same branch within the switch(boss.phase)
statement. While it's commendable that ZUN tried to reduce code duplication
for once, he could have just branched depending on the actual
boss.phase variable? The same state byte is then reused in the
"devil" pattern to track the activity state of the big jerky lasers in the
second half of the pattern. If you somehow managed to end the phase after
the first few bullets of the pattern, but before these lasers are up,
Shinki's update function would think that you're still in the phase
before the "devil" pattern. The main function then sequence-breaks
right to the defeat phase, skipping the final pattern with the burning Makai
background. Luckily, the HP boundaries are far away enough to make this
impossible in practice.
The takeaway here: If you want to use the state bytes for your custom
boss script mods, alias them to your own 16-byte structure, and limit each
of the bytes to a clearly defined meaning across your entire boss script.
One final discovery that doesn't seem to be documented anywhere yet: Shinki
actually has a hidden bomb shield during her two purple-wing phases.
uth05win got this part slightly wrong though: It's not a complete
shield, and hitting Shinki will still deal 1 point of chip damage per
frame. For comparison, the first phase lasts for 3,000 HP, and the "devil"
pattern phase lasts for 5,800 HP.
And there we go, 3rd PC-98 Touhou boss
script* decompiled, 28 to go! 🎉 In case you were expecting a fix for
the Shinki death glitch: That one
is more appropriately fixed as part of the Mai & Yuki script. It also
requires new code, should ideally look a bit prettier than just removing
cheetos between one frame and the next, and I'd still like it to fit within
the original position-dependent code layout… Let's do that some other
time.
Not much to say about the Stage 1 midboss, or midbosses in general even,
except that their update functions have to imperatively handle even more
subsystems, due to the relative lack of helper functions.
The remaining ¾ of the third push went to a bunch of smaller RE and
finalization work that would have hardly got any attention otherwise, to
help secure that 50% RE mark. The nicest piece of code in there shows off
what looks like the optimal way of setting up the
📝 GRCG tile register for monochrome blitting
in a variable color:
mov ah, palette_index ; Any other non-AL 8-bit register works too.
; (x86 only supports AL as the source operand for OUTs.)
rept 4 ; For all 4 bitplanes…
shr ah, 1 ; Shift the next color bit into the x86 carry flag
sbb al, al ; Extend the carry flag to a full byte
; (CF=0 → 0x00, CF=1 → 0xFF)
out 7Eh, al ; Write AL to the GRCG tile register
endm
Thanks to Turbo C++'s inlining capabilities, the loop body even decompiles
into a surprisingly nice one-liner. What a beautiful micro-optimization, at
a place where micro-optimization doesn't hurt and is almost expected.
Unfortunately, the micro-optimizations went all downhill from there,
becoming increasingly dumb and undecompilable. Was it really necessary to
save 4 x86 instructions in the highly unlikely case of a new spark sprite
being spawned outside the playfield? That one 2D polar→Cartesian
conversion function then pointed out Turbo C++ 4.0J's woefully limited
support for 32-bit micro-optimizations. The code generation for 32-bit
📝 pseudo-registers is so bad that they almost
aren't worth using for arithmetic operations, and the inline assembler just
flat out doesn't support anything 32-bit. No use in decompiling a function
that you'd have to entirely spell out in machine code, especially if the
same function already exists in multiple other, more idiomatic C++
variations.
Rounding out the third push, we got the TH04/TH05 DEMO?.REC
replay file reading code, which should finally prove that nothing about the
game's original replay system could serve as even just the foundation for
community-usable replays. Just in case anyone was still thinking that.
Next up: Back to TH01, with the Elis fight! Got a bit of room left in the
cap again, and there are a lot of things that would make a lot of
sense now:
TH04 would really enjoy a large number of dedicated pushes to catch up
with TH05. This would greatly support the finalization of both games.
Continuing with TH05's bosses and midbosses has shown to be good value
for your money. Shinki would have taken even less than 2 pushes if she
hadn't been the first boss I looked at.
Oh, and I also added Seihou as a selectable goal, for the two people out
there who genuinely like it. If I ever want to quit my day job, I need to
branch out into safer territory that isn't threatened by takedowns, after
all.
Been 📝 a while since we last looked at any of
TH03's game code! But before that, we need to talk about Y coordinates.
During TH03's MAIN.EXE, the PC-98 graphics GDC runs in its
line-doubled 640×200 resolution, which gives the in-game portion its
distinctive stretched low-res look. This lower resolution is a consequence
of using 📝 Promisence Soft's SPRITE16 driver:
Its performance simply stems from the fact that it expects sprites to be
stored in the bottom half of VRAM, which allows them to be blitted using the
same EGC-accelerated VRAM-to-VRAM copies we've seen again and again in all
other games. Reducing the visible resolution also means that the sprites can
be stored on both VRAM pages, allowing the game to still be double-buffered.
If you force the graphics chip to run at 640×400, you can see them:
Note that the text chip still displays its overlaid contents at 640×400,
which means that TH03's in-game portion technically runs at two
resolutions at the same time.
But that means that any mention of a Y coordinate is ambiguous: Does it
refer to undoubled VRAM pixels, or on-screen stretched pixels? Especially
people who have known about the line doubling for years might almost expect
technical blog posts on this game to use undoubled VRAM coordinates. So,
let's introduce a new formatting convention for both on-screen
640×400 and undoubled 640×200 coordinates,
and always write out both to minimize the confusion.
Alright, now what's the thing gonna be? The enemy structure is highly
overloaded, being used for enemies, fireballs, and explosions with seemingly
different semantics for each. Maybe a bit too much to be figured out in what
should ideally be a single push, especially with all the functions that
would need to be decompiled? Bullet code would be easier, but not exactly
single-push material either. As it turns out though, there's something more
fundamental left to be done first, which both of these subsystems depend on:
collision detection!
And it's implemented exactly how I always naively imagined collision
detection to be implemented in a fixed-resolution 2D bullet hell game with
small hitboxes: By keeping a separate 1bpp bitmap of both playfields in
memory, drawing in the collidable regions of all entities on every frame,
and then checking whether any pixels at the current location of the player's
hitbox are set to 1. It's probably not done in the other games because their
single data segment was already too packed for the necessary 17,664 bytes to
store such a bitmap at pixel resolution, and 282,624 bytes for a bitmap at
Q12.4 subpixel resolution would have been prohibitively expensive in 16-bit
Real Mode DOS anyway. In TH03, on the other hand, this bitmap is doubly
useful, as the AI also uses it to elegantly learn what's on the playfield.
By halving the resolution and only tracking tiles of 2×2 / 2×1 pixels, TH03 only requires an adequate total
of 6,624 bytes of memory for the collision bitmaps of both playfields.
So how did the implementation not earn the good-code tag this time? Because the code for drawing into these bitmaps is undecompilable hand-written x86 assembly. And not just your usual ASM that was basically compiled from C and then edited to maybe optimize register allocation and maybe replace a bunch of local variables with self-modifying code, oh no. This code is full of overly clever bit twiddling, abusing the fact that the 16-bit AX,
BX, CX, and DX registers can also be
accessed as two 8-bit registers, calculations that change the semantic
meaning behind the value of a register, or just straight-up reassignments of
different values to the same small set of registers. Sure, in some way it is
impressive, and it all does work and correctly covers every edge
case, but come on. This could have all been a lot more readable in
exchange for just a few CPU cycles.
What's most interesting though are the actual shapes that these functions
draw into the collision bitmap. On the surface, we have:
vertical slopes at any angle across the whole playfield; exclusively
used for Chiyuri's diagonal laser EX attack
straight vertical lines, with a width of 1 tile; exclusively used for
the 2×2 / 2×1 hitboxes of bullets
rectangles at arbitrary sizes
But only 2) actually draws a full solid line. 1) and 3) are only ever drawn
as horizontal stripes, with a hardcoded distance of 2 vertical tiles
between every stripe of a slope, and 4 vertical tiles between every stripe
of a rectangle. That's 66-75% of each rectangular entity's intended hitbox
not actually taking part in collision detection. Now, if player hitboxes
were ≤ 6 / 3 pixels, we'd have one
possible explanation of how the AI can "cheat", because it could just
precisely move through those blank regions at TAS speeds. So, let's make
this two pushes after all and tell the complete story, since this is one of
the more interesting aspects to still be documented in this game.
And the code only gets worse. While the player
collision detection function is decompilable, it might as well not
have been, because it's just more of the same "optimized", hard-to-follow
assembly. With the four splittable 16-bit registers having a total of 20
different meanings in this function, I would have almost preferred
self-modifying code…
In fact, it was so bad that it prompted some maintenance work on my inline
assembly coding standards as a whole. Turns out that the _asm
keyword is not only still supported in modern Visual Studio compilers, but
also in Clang with the -fms-extensions flag, and compiles fine
there even for 64-bit targets. While that might sound like amazing news at
first ("awesome, no need to rewrite this stuff for my x86_64 Linux
port!"), you quickly realize that almost all inline assembly in this
codebase assumes either PC-98 hardware, segmented 16-bit memory addressing,
or is a temporary hack that will be removed with further RE progress.
That's mainly because most of the raw arithmetic code uses Turbo C++'s
register pseudovariables where possible. While they certainly have their
drawbacks, being a non-standard extension that's not supported in other
x86-targeting C compilers, their advantages are quite significant: They
allow this code to stay in the same language, and provide slightly more
immediate portability to any other architecture, together with
📝 readability and maintainability improvements that can get quite significant when combined with inlining:
// This one line compiles to five ASM instructions, which would need to be
// spelled out in any C compiler that doesn't support register pseudovariables.
// By adding typed aliases for these registers via `#define`, this code can be
// both made even more readable, and be prepared for an easier transformation
// into more portable local variables.
_ES = (((_AX * 4) + _BX) + SEG_PLANE_B);
However, register pseudovariables might cause potential portability issues
as soon as they are mixed with inline assembly instructions that rely on
their state. The lazy way of "supporting pseudo-registers" in other
compilers would involve declaring the full set as global variables, which
would immediately break every one of those instances:
_DI = 0;
_AX = 0xFFFF;
// Special x86 instruction doing the equivalent of
//
// *reinterpret_cast(MK_FP(_ES, _DI)) = _AX;
// _DI += sizeof(uint16_t);
//
// Only generated by Turbo C++ in very specific cases, and therefore only
// reliably available through inline assembly.
asm { movsw; }
What's also not all too standardized, though, are certain variants of
the asm keyword. That's why I've now introduced a distinction
between the _asm keyword for "decently sane" inline assembly,
and the slightly less standard asm keyword for inline assembly
that relies on the contents of pseudo-registers, and should break on
compilers that don't support them. So yeah, have some minor
portability work in exchange for these two pushes not having all that much
in RE'd content.
With that out of the way and the function deciphered, we can confirm the
player hitboxes to be a constant 8×8 /
8×4 pixels, and prove that the hit stripes are nothing but
an adequate optimization that doesn't affect gameplay in any way.
And what's the obvious thing to immediately do if you have both the
collision bitmap and the player hitbox? Writing a "real hitbox" mod, of
course:
Reorder the calls to rendering functions so that player and shot sprites
are rendered after bullets
Blank out all player sprite pixels outside an
8×8 / 8×4 box around the center
point
After the bullet rendering function, turn on the GRCG in RMW mode and
set the tile register set to the background color
Stretch the negated contents of collision bitmap onto each playfield,
leaving only collidable pixels untouched
Do the same with the actual, non-negated contents and a white color, for
extra contrast against the background. This also makes sure to show any
collidable areas whose sprite pixels are transparent, such as with the moon
enemy. (Yeah, how unfair.) Doing that also loses a lot of information about
the playfield, such as enemy HP indicated by their color, but what can you
do:
2022-02-18-TH03-real-hitbox.zip
The secret for writing such mods before having reached a sufficient level of
position independence? Put your new code segment into DGROUP,
past the end of the uninitialized data section. That's why this modded
MAIN.EXE is a lot larger than you would expect from the raw amount of new code: The file now actually needs to store all these
uninitialized 0 bytes between the end of the data segment and the first
instruction of the mod code – normally, this number is simply a part of the
MZ EXE header, and doesn't need to be redundantly stored on disk. Check the
th03_real_hitbox
branch for the code.
And now we know why so many "real hitbox" mods for the Windows Touhou games
are inaccurate: The games would simply be unplayable otherwise – or can
you dodge rapidly moving 2×2 /
2×1 blocks as an 8×8 /
8×4 rectangle that is smaller than your shot sprites,
especially without focused movement? I can't.
Maybe it will feel more playable after making explosions visible, but that
would need more RE groundwork first.
It's also interesting how adding two full GRCG-accelerated redraws of both
playfields per frame doesn't significantly drop the game's frame rate – so
why did the drawing functions have to be micro-optimized again? It
would be possible in one pass by using the GRCG's TDW mode, which
should theoretically be 8× faster, but I have to stop somewhere.
Next up: The final missing piece of TH04's and TH05's
bullet-moving code, which will include a certain other
type of projectile as well.
Here we go, TH01 Sariel! This is the single biggest boss fight in all of
PC-98 Touhou: If we include all custom effect code we previously decompiled,
it amounts to a total of 10.31% of all code in TH01 (and 3.14%
overall). These 8 pushes cover the final 8.10% (or 2.47% overall),
and are likely to be the single biggest delivery this project will ever see.
Considering that I only managed to decompile 6.00% across all games in 2021,
2022 is already off to a much better start!
So, how can Sariel's code be that large? Well, we've got:
16 danmaku patterns; including the one snowflake detonating into a giant
94×32 hitbox
Gratuitous usage of floating-point variables, bloating the binary thanks
to Turbo C++ 4.0J's particularly horrid code generation
The hatching birds that shoot pellets
3 separate particle systems, sharing the general idea, overall code
structure, and blitting algorithm, but differing in every little detail
The "gust of wind" background transition animation
5 sets of custom monochrome sprite animations, loaded from
BOSS6GR?.GRC
A further 3 hardcoded monochrome 8×8 sprites for the "swaying leaves"
pattern during the second form
In total, it's just under 3,000 lines of C++ code, containing a total of 8
definite ZUN bugs, 3 of them being subpixel/pixel confusions. That might not
look all too bad if you compare it to the
📝 player control function's 8 bugs in 900 lines of code,
but given that Konngara had 0… (Edit (2022-07-17):
Konngara contains two bugs after all: A
📝 possible heap corruption in test or debug mode,
and the infamous
📝 temporary green discoloration.)
And no, the code doesn't make it obvious whether ZUN coded Konngara or
Sariel first; there's just as much evidence for either.
Some terminology before we start: Sariel's first form is separated
into four phases, indicated by different background images, that
cycle until Sariel's HP reach 0 and the second, single-phase form
starts. The danmaku patterns within each phase are also on a cycle,
and the game picks a random but limited number of patterns per phase before
transitioning to the next one. The fight always starts at pattern 1 of phase
1 (the random purple lasers), and each new phase also starts at its
respective first pattern.
Sariel's bugs already start at the graphics asset level, before any code
gets to run. Some of the patterns include a wand raise animation, which is
stored in BOSS6_2.BOS:
The "lowered wand" sprite is missing in this file simply because it's
captured from the regular background image in VRAM, at the beginning of the
fight and after every background transition. What I previously thought to be
📝 background storage code has therefore a
different meaning in Sariel's case. Since this captured sprite is fully
opaque, it will reset the entire 128×128 wand area… wait, 128×128, rather
than 96×96? Yup, this lowered sprite is larger than necessary, wasting 1,967
bytes of conventional memory. That still doesn't quite explain the
second sprite in BOSS6_2.BOS though. Turns out that the black
part is indeed meant to unblit the purple reflection (?) in the first
sprite. But… that's not how you would correctly unblit that?
The first sprite already eats up part of the red HUD line, and the second
one additionally fails to recover the seal pixels underneath, leaving a nice
little black hole and some stray purple pixels until the next background
transition. Quite ironic given that both
sprites do include the right part of the seal, which isn't even part of the
animation.
Just like Konngara, Sariel continues the approach of using a single function
per danmaku pattern or custom entity. While I appreciate that this allows
all pattern- and entity-specific state to be scoped locally to that one
function, it quickly gets ugly as soon as such a function has to do more than one thing.
The "bird function" is particularly awful here: It's just one if(…)
{…} else if(…) {…} else if(…) {…} chain with different
branches for the subfunction parameter, with zero shared code between any of
these branches. It also uses 64-bit floating-point double as
its subpixel type… and since it also takes four of those as parameters
(y'know, just in case the "spawn new bird" subfunction is called), every
call site has to also push four double values onto the stack.
Thanks to Turbo C++ even using the FPU for pushing a 0.0 constant, we
have already reached maximum floating-point decadence before even having
seen a single danmaku pattern. Why decadence? Every possible spawn position
and velocity in both bird patterns just uses pixel resolution, with no
fractional component in sight. And there goes another 720 bytes of
conventional memory.
Speaking about bird patterns, the red-bird one is where we find the first
code-level ZUN bug: The spawn cross circle sprite suddenly disappears after
it finished spawning all the bird eggs. How can we tell it's a bug? Because
there is code to smoothly fly this sprite off the playfield, that
code just suddenly forgets that the sprite's position is stored in Q12.4
subpixels, and treats it as raw screen pixels instead.
As a result, the well-intentioned 640×400
screen-space clipping rectangle effectively shrinks to 38×23 pixels in the
top-left corner of the screen. Which the sprite is always outside of, and
thus never rendered again.
The intended animation is easily restored though:
Also, did you know that birds actually have a quite unfair 14×38-pixel
hitbox? Not that you'd ever collide with them in any of the patterns…
Another 3 of the 8 bugs can be found in the symmetric, interlaced spawn rays
used in three of the patterns, and the 32×32 debris "sprites" shown at their endpoint, at
the edge of the screen. You kinda have to commend ZUN's attention to detail
here, and how he wrote a lot of code for those few rapidly animated pixels
that you most likely don't
even notice, especially with all the other wrong pixels
resulting from rendering glitches. One of the bugs in the very final pattern
of phase 4 even turns them into the vortex sprites from the second pattern
in phase 1 during the first 5 frames of
the first time the pattern is active, and I had to single-step the blitting
calls to verify it.
It certainly was annoying how much time I spent making sense of these bugs,
and all weird blitting offsets, for just a few pixels… Let's look at
something more wholesome, shall we?
So far, we've only seen the PC-98 GRCG being used in RMW (read-modify-write)
mode, which I previously
📝 explained in the context of TH01's red-white HP pattern.
The second of its three modes, TCR (Tile Compare Read), affects VRAM reads
rather than writes, and performs "color extraction" across all 4 bitplanes:
Instead of returning raw 1bpp data from one plane, a VRAM read will instead
return a bitmask, with a 1 bit at every pixel whose full 4-bit color exactly
matches the color at that offset in the GRCG's tile register, and 0
everywhere else. Sariel uses this mode to make sure that the 2×2 particles
and the wind effect are only blitted on top of "air color" pixels, with
other parts of the background behaving like a mask. The algorithm:
Set the GRCG to TCR mode, and all 8 tile register dots to the air
color
Read N bits from the target VRAM position to obtain an N-bit mask where
all 1 bits indicate air color pixels at the respective position
AND that mask with the alpha plane of the sprite to be drawn, shifted to
the correct start bit within the 8-pixel VRAM byte
Set the GRCG to RMW mode, and all 8 tile register dots to the color that
should be drawn
Write the previously obtained bitmask to the same position in VRAM
Quite clever how the extracted colors double as a secondary alpha plane,
making for another well-earned good-code tag. The wind effect really doesn't deserve it, though:
ZUN calculates every intermediate result inside this function
over and over and over again… Together with some ugly
pointer arithmetic, this function turned into one of the most tedious
decompilations in a long while.
This gradual effect is blitted exclusively to the front page of VRAM,
since parts of it need to be unblitted to create the illusion of a gust of
wind. Then again, anything that moves on top of air-colored background –
most likely the Orb – will also unblit whatever it covered of the effect…
As far as I can tell, ZUN didn't use TCR mode anywhere else in PC-98 Touhou.
Tune in again later during a TH04 or TH05 push to learn about TDW, the final
GRCG mode!
Speaking about the 2×2 particle systems, why do we need three of them? Their
only observable difference lies in the way they move their particles:
Up or down in a straight line (used in phases 4 and 2,
respectively)
Left or right in a straight line (used in the second form)
Left and right in a sinusoidal motion (used in phase 3, the "dark
orange" one)
Out of all possible formats ZUN could have used for storing the positions
and velocities of individual particles, he chose a) 64-bit /
double-precision floating-point, and b) raw screen pixels. Want to take a
guess at which data type is used for which particle system?
If you picked double for 1) and 2), and raw screen pixels for
3), you are of course correct! Not that I'm implying
that it should have been the other way round – screen pixels would have
perfectly fit all three systems use cases, as all 16-bit coordinates
are extended to 32 bits for trigonometric calculations anyway. That's what,
another 1.080 bytes of wasted conventional memory? And that's even
calculated while keeping the current architecture, which allocates
space for 3×30 particles as part of the game's global data, although only
one of the three particle systems is active at any given time.
That's it for the first form, time to put on "Civilization
of Magic"! Or "死なばもろとも"? Or "Theme of 地獄めくり"? Or whatever SYUGEN is
supposed to mean…
… and the code of these final patterns comes out roughly as exciting as
their in-game impact. With the big exception of the very final "swaying
leaves" pattern: After 📝 Q4.4,
📝 Q28.4,
📝 Q24.8, and double variables,
this pattern uses… decimal subpixels? Like, multiplying the number by
10, and using the decimal one's digit to represent the fractional part?
Well, sure, if you really insist on moving the leaves in cleanly
represented integer multiples of ⅒, which is infamously impossible in IEEE
754. Aside from aesthetic reasons, it only really combines less precision
(10 possible fractions rather than the usual 16) with the inferior
performance of having to use integer divisions and multiplications rather
than simple bit shifts. And it's surely not because the leaf sprites needed
an extended integer value range of [-3276, +3276], compared to
Q12.4's [-2047, +2048]: They are clipped to 640×400 screen space
anyway, and are removed as soon as they leave this area.
This pattern also contains the second bug in the "subpixel/pixel confusion
hiding an entire animation" category, causing all of
BOSS6GR4.GRC to effectively become unused:
At least their hitboxes are what you would expect, exactly covering the
30×30 pixels of Reimu's sprite. Both animation fixes are available on the th01_sariel_fixes
branch.
After all that, Sariel's main function turned out fairly unspectacular, just
putting everything together and adding some shake, transition, and color
pulse effects with a bunch of unnecessary hardware palette changes. There is
one reference to a missing BOSS6.GRP file during the
first→second form transition, suggesting that Sariel originally had a
separate "first form defeat" graphic, before it was replaced with just the
shaking effect in the final game.
Speaking about the transition code, it is kind of funny how the… um,
imperative and concrete nature of TH01 leads to these 2×24
lines of straight-line code. They kind of look like ZUN rattling off a
laundry list of subsystems and raw variables to be reinitialized, making
damn sure to not forget anything.
Whew! Second PC-98 Touhou boss completely decompiled, 29 to go, and they'll
only get easier from here! 🎉 The next one in line, Elis, is somewhere
between Konngara and Sariel as far as x86 instruction count is concerned, so
that'll need to wait for some additional funding. Next up, therefore:
Looking at a thing in TH03's main game code – really, I have little
idea what it will be!
Now that the store is open again, also check out the
📝 updated RE progress overview I've posted
together with this one. In addition to more RE, you can now also directly
order a variety of mods; all of these are further explained in the order
form itself.
Alright, onto Konngara! Let's quickly move the escape sequences used later
in the battle to C land, and then we can immediately decompile the loading
and entrance animation function together with its filenames. Might as well
reverse-engineer those escape sequences while I'm at it, though – even if
they aren't implemented in DOSBox-X, they're well documented in all those
Japanese PDFs, so this should be no big deal…
…wait, ESC )3 switches to "graph mode"? As opposed to the
default "kanji mode", which can be re-entered via ESC )0?
Let's look up graph mode in the PC-9801 Programmers' Bible then…
> Kanji cannot be handled in this mode.
…and that's apparently all it has to say. Why have it then, on a platform
whose main selling point is a kanji ROM, and where Shift-JIS (and, well,
7-bit ASCII) are the only native encodings? No support for graph mode in
DOSBox-X either… yeah, let's take a deep dive into NEC's
IO.SYS, and get to the bottom of this.
And yes, graph mode pretty much just disables Shift-JIS decoding for
characters written via INT 29h, the lowest-level way of "just
printing a char" on DOS, which every printf()
will ultimately end up calling. Turns out there is a use for it though,
which we can spot by looking at the 8×16 half-width section of font ROM:
The half-width glyphs marked in red
correspond to the byte ranges from 0x80-0x9F and 0xE0-0xFF… which Shift-JIS
defines as lead bytes for two-byte, full-width characters. But if we turn
off Shift-JIS decoding…
Jackpot, we get those half-width characters when printing their
corresponding bytes. I've
re-implemented all my findings into DOSBox-X, which will include graph
mode in the upcoming 0.83.14 release. If P0140 looks a bit empty as a
result, that's why – most of the immediate feature work went into
DOSBox-X, not into ReC98. That's the beauty of "anything" pushes.
So, after switching to graph mode, TH01 does… one of the slowest possible
memset()s over all of text RAM – one printf(" ")
call for every single one of its 80×25 half-width cells – before switching
back to kanji mode. What a waste of RE time…? Oh well, at least we've now
got plenty of proof that these weird escape sequences actually do
nothing of interest.
As for the Konngara code itself… well, it's script-like code, what can you
say. Maybe minimally sloppy in some places, but ultimately harmless.
One small thing that might not be widely known though: The large,
blue-green Siddhaṃ seed syllables are supposed to show up immediately, with
no delay between them? Good to know. Clocking your emulator too low tends
to roll them down from the top of the screen, and will certainly add a
noticeable delay between the four individual images.
… Wait, but this means that ZUN could have intended this "effect".
Why else would he not only put those syllables into four individual images
(and therefore add at least the latency of disk I/O between them), but also
show them on the foreground VRAM page, rather than on the "back buffer"?
Meanwhile, in 📝 another instance of "maybe
having gone too far in a few places":
Expressing distances on the playfield as fractions of its width
and height, just to avoid absolute numbers? Raw numbers are bad because
they're in screen space in this game. But we've already been throwing
PLAYFIELD_ constants into the mix as a way of explicitly
communicating screen space, and keeping raw number literals for the actual
playfield coordinates is looking increasingly sloppy… I don't know,
fractions really seemed like the most sensible thing to do with what we're
given here. 😐
So, 2 pushes in, and we've got the loading code, the entrance animation,
facial expression rendering, and the first one out of Konngara's 12
danmaku patterns. Might not sound like much, but since that first pattern
involves those
blue-green diamond sprites and therefore is one of the more complicated
ones, it all amounts to roughly 21.6% of Konngara's code. That's 7 more
pushes to get Konngara done, then? Next up though: Two pushes of website
improvements.
50% hype! 🎉 But as usual for TH01, even that final set of functions
shared between all bosses had to consume two pushes rather than one…
First up, in the ongoing series "Things that TH01 draws to the PC-98
graphics layer that really should have been drawn to the text layer
instead": The boss HP bar. Oh well, using the graphics layer at least made
it possible to have this half-red, half-white pattern
for the middle section.
This one pattern is drawn by making surprisingly good use of the GRCG. So
far, we've only seen it used for fast monochrome drawing:
// Setting up fast drawing using color #9 (1001 in binary)
grcg_setmode(GC_RMW);
outportb(0x7E, 0xFF); // Plane 0: (B): (********)
outportb(0x7E, 0x00); // Plane 1: (R): ( )
outportb(0x7E, 0x00); // Plane 2: (G): ( )
outportb(0x7E, 0xFF); // Plane 3: (E): (********)
// Write a checkerboard pattern (* * * * ) in color #9 to the top-left corner,
// with transparent blanks. Requires only 1 VRAM write to a single bitplane:
// The GRCG automatically writes to the correct bitplanes, as specified above
*(uint8_t *)(MK_FP(0xA800, 0)) = 0xAA;
But since this is actually an 8-pixel tile register, we can set any
8-pixel pattern for any bitplane. This way, we can get different colors
for every one of the 8 pixels, with still just a single VRAM write of the
alpha mask to a single bitplane:
And I thought TH01 only suffered the drawbacks of PC-98 hardware, making
so little use of its actual features that it's perhaps not fair to even
call it "a PC-98 game"… Still, I'd say that "bad PC-98 port of an idea"
describes it best.
However, after that tiny flash of brilliance, the surrounding HP rendering
code goes right back to being the typical sort of confusing TH01 jank.
There's only a single function for the three distinct jobs of
incrementing HP during the boss entrance animation,
decrementing HP if hit by the Orb, and
redrawing the entire bar, because it's still all in VRAM, and Sariel
wants different backgrounds,
with magic numbers to select between all of these.
VRAM of course also means that the backgrounds behind the individual hit
points have to be stored, so that they can be unblitted later as the boss
is losing HP. That's no big deal though, right? Just allocate some memory,
copy what's initially in VRAM, then blit it back later using your
foundational set of blitting funct– oh, wait, TH01 doesn't have this sort
of thing, right The closest thing,
📝 once again, are the .PTN functions. And
so, the game ends up handling these 8×16 background sprites with 16×16
wrappers around functions for 32×32 sprites.
That's quite the recipe for confusion, especially since ZUN
preferred copy-pasting the necessary ridiculous arithmetic expressions for
calculating positions, .PTN sprite IDs, and the ID of the 16×16 quarter
inside the 32×32 sprite, instead of just writing simple helper functions.
He did manage to make the result mostly bug-free this time
around, though! (Edit (2022-05-31): Nope, there's a
📝 potential heap corruption after all, which can be triggered in some fights in test mode (game t) or debug mode (game d).)
There's one minor hit point discoloration bug if the red-white or white
sections start at an odd number of hit points, but that's never the case for
any of the original 7 bosses.
The remaining sloppiness is ultimately inconsequential as well: The game
always backs up twice the number of hit point backgrounds, and thus
uses twice the amount of memory actually required. Also, this
self-restriction of only unblitting 16×16 pixels at a time requires any
remaining odd hit point at the last position to, of course, be rendered
again
After stumbling over the weakest imaginable random number
generator, we finally arrive at the shared boss↔orb collision
handling function, the final blocker among the final blockers. This
function takes a whopping 12 parameters, 3 of them being references to
int values, some of which are duplicated for every one of the
7 bosses, with no generic boss struct anywhere.
📝 Previously, I speculated that YuugenMagan might have been the first boss to be programmed for TH01.
With all these variables though, there is some new evidence that SinGyoku
might have been the first one after all: It's the only boss to use its own
HP and phase frame variables, with the other bosses sharing the same two
globals.
While this function only handles the response to a boss↔orb
collision, it still does way too much to describe it briefly. Took me
quite a while to frame it in terms of invincibility (which is the
main impact of all of this that can be observed in gameplay code). That
made at least some sort of sense, considering the other usages of
the variables passed as references to that function. Turns out that
YuugenMagan, Kikuri, and Elis abuse what's meant to be the "invincibility
frame" variable as a frame counter for some of their animations 🙄
Oh well, the game at least doesn't call the collision handling function
during those, so "invincibility frame" is technically still a
correct variable name there.
And that's it! We're finally ready to start with Konngara, in 2021. I've
been waiting quite a while for this, as all this high-level boss code is
very likely to speed up TH01 progress quite a bit. Next up though: Closing
out 2020 with more of the technical debt in the other games.
So, let's finally look at some TH01 gameplay structures! The obvious
choices here are player shots and pellets, which are conveniently located
in the last code segment. Covering these would therefore also help in
transferring some first bits of data in REIIDEN.EXE from ASM
land to C land. (Splitting the data segment would still be quite
annoying.) Player shots are immediately at the beginning…
…but wait, these are drawn as transparent sprites loaded from .PTN files.
Guess we first have to spend a push on
📝 Part 2 of this format.
Hm, 4 functions for alpha-masked blitting and unblitting of both 16×16 and
32×32 .PTN sprites that align the X coordinate to a multiple of 8
(remember, the PC-98 uses a
planar
VRAM memory layout, where 8 pixels correspond to a byte), but only one
function that supports unaligned blitting to any X coordinate, and only
for 16×16 sprites? Which is only called twice? And doesn't come with a
corresponding unblitting function?
Yeah, "unblitting". TH01 isn't
double-buffered,
and uses the PC-98's second VRAM page exclusively to store a stage's
background and static sprites. Since the PC-98 has no hardware sprites,
all you can do is write pixels into VRAM, and any animated sprite needs to
be manually removed from VRAM at the beginning of each frame. Not using
double-buffering theoretically allows TH01 to simply copy back all 128 KB
of VRAM once per frame to do this. But that
would be pretty wasteful, so TH01 just looks at all animated sprites, and
selectively copies only their occupied pixels from the second to the first
VRAM page.
Alright, player shot class methods… oh, wait, the collision functions
directly act on the Yin-Yang Orb, so we first have to spend a push on
that one. And that's where the impression we got from the .PTN
functions is confirmed: The orb is, in fact, only ever displayed at
byte-aligned X coordinates, divisible by 8. It's only thanks to the
constant spinning that its movement appears at least somewhat
smooth.
This is purely a rendering issue; internally, its position is
tracked at pixel precision. Sadly, smooth orb rendering at any unaligned X
coordinate wouldn't be that trivial of a mod, because well, the
necessary functions for unaligned blitting and unblitting of 32×32 sprites
don't exist in TH01's code. Then again, there's so much potential for
optimization in this code, so it might be very possible to squeeze those
additional two functions into the same C++ translation unit, even without
position independence…
More importantly though, this was the right time to decompile the core
functions controlling the orb physics – probably the highlight in these
three pushes for most people.
Well, "physics". The X velocity is restricted to the 5 discrete states of
-8, -4, 0, 4, and 8, and gravity is applied by simply adding 1 to the Y
velocity every 5 frames No wonder that this can
easily lead to situations in which the orb infinitely bounces from the
ground.
At least fangame authors now have
a
reference of how ZUN did it originally, because really, this bad
approximation of physics had to have been written that way on purpose. But
hey, it uses 64-bit floating-point variables!
…sometimes at least, and quite randomly. This was also where I had to
learn about Turbo C++'s floating-point code generation, and how rigorously
it defines the order of instructions when mixing double and
float variables in arithmetic or conditional expressions.
This meant that I could only get ZUN's original instruction order by using
literal constants instead of variables, which is impossible right now
without somehow splitting the data segment. In the end, I had to resort to
spelling out ⅔ of one function, and one conditional branch of another, in
inline ASM. 😕 If ZUN had just written 16.0 instead of
16.0f there, I would have saved quite some hours of my life
trying to decompile this correctly…
To sort of make up for the slowdown in progress, here's the TH01 orb
physics debug mod I made to properly understand them. Edit
(2022-07-12): This mod is outdated,
📝 the current version is here!2020-06-13-TH01OrbPhysicsDebug.zip
To use it, simply replace REIIDEN.EXE, and run the game
in debug mode, via game d on the DOS prompt.
Its code might also serve as an example of how to achieve this sort of
thing without position independence.
Alright, now it's time for player shots though. Yeah, sure, they
don't move horizontally, so it's not too bad that those are also
always rendered at byte-aligned positions. But, uh… why does this code
only use the 16×16 alpha-masked unblitting function for decaying shots,
and just sloppily unblits an entire 16×16 square everywhere else?
The worst part though: Unblitting, moving, and rendering player shots
is done in a single function, in that order. And that's exactly where
TH01's sprite flickering comes from. Since different types of sprites are
free to overlap each other, you'd have to first unblit all types, then
move all types, and then render all types, as done in later
PC-98 Touhou games. If you do these three steps per-type instead, you
will unblit sprites of other types that have been rendered before… and
therefore end up with flicker.
Oh, and finally, ZUN also added an additional sloppy 16×16 square unblit
call if a shot collides with a pellet or a boss, for some
guaranteed flicker. Sigh.
And that's ⅓ of all ZUN code in TH01 decompiled! Next up: Pellets!