With Elis, we've not only reached the midway point in TH01's boss code, but
also a bunch of other milestones: Both REIIDEN.EXE and TH01 as
a whole have crossed the 75% RE mark, and overall position independence has
also finally cracked 80%!
And it got done in 4 pushes again? Yup, we're back to
📝 Konngara levels of redundancy and
copy-pasta. This time, it didn't even stop at the big copy-pasted code
blocks for the rift sprite and 256-pixel circle animations, with the words
"redundant" and "unnecessary" ending up a total of 18 times in my source
code comments.
But damn is this fight broken. As usual with TH01 bosses, let's start with a
high-level overview:
The Elis fight consists of 5 phases (excluding the entrance animation),
which must be completed in order.
In all odd-numbered phases, Elis uses a random one-shot danmaku pattern
from an exclusive per-phase pool before teleporting to a random
position.
There are 3 exclusive girl-form patterns per phase, plus 4
additional bat-form patterns in phase 5, for a total of 13.
Due to a quirk in the selection algorithm in phases 1 and 3, there
is a 25% chance of Elis skipping an attack cycle and just teleporting
again.
In contrast to Konngara, Elis can freely select the same pattern
multiple times in a row. There's nothing in the code to prevent that
from happening.
This pattern+teleport cycle is repeated until Elis' HP reach a certain
threshold value. The odd-numbered phases correspond to the white (phase 1),
red-white (phase 3), and red (phase 5) sections of the health bar. However,
the next phase can only start at the end of each cycle, after a
teleport.
Phase 2 simply teleports Elis back to her starting screen position of
(320, 144) and then advances to phase 3.
Phase 4 does the same as phase 2, but adds the initial bat form
transformation before advancing to phase 5.
Phase 5 replaces the teleport with a transformation to the bat form.
Rather than teleporting instantly to the target position, the bat gradually
flies there, firing a randomly selected looping pattern from the 4-pattern
bat pool on the way, before transforming back to the girl form.
This puts the earliest possible end of the fight at the first frame of phase
5. However, nothing prevents Elis' HP from reaching 0 before that point. You
can nicely see this in 📝 debug mode: Wait
until the HP bar has filled up to avoid heap corruption, hold ↵ Return
to reduce her HP to 0, and watch how Elis still goes through a total of
two patterns* and four
teleport animations before accepting defeat.
But wait, heap corruption? Yup, there's a bug in the HP bar that already
affected Konngara as well, and it isn't even just about the graphical
glitches generated by negative HP:
The initial fill-up animation is drawn to both VRAM pages at a rate of 1
HP per frame… by passing the current frame number as the
current_hp number.
The target_hp is indicated by simply passing the current
HP…
… which, however, can be reduced in debug mode at an equal rate of up to
1 HP per frame.
The completion condition only checks if
((target_hp - 1) == current_hp). With the
right timing, both numbers can therefore run past each other.
In that case, the function is repeatedly called on every frame, backing
up the original VRAM contents for the current HP point before blitting
it…
… until frame ((96 / 2) + 1), where the
.PTN slot pointer overflows the heap buffer and overwrites whatever comes
after. 📝 Sounds familiar, right?
Since Elis starts with 14 HP, which is an even number, this corruption is
trivial to cause: Simply hold ↵ Return from the beginning of the
fight, and the completion condition will never be true, as the
HP and frame numbers run past the off-by-one meeting point.
Regular gameplay, however, entirely prevents this due to the fixed start
positions of Reimu and the Orb, the Orb's fixed initial trajectory, and the
50 frames of delay until a bomb deals damage to a boss. These aspects make
it impossible to hit Elis within the first 14 frames of phase 1, and ensure
that her HP bar is always filled up completely. So ultimately, this bug ends
up comparable in seriousness to the
📝 recursion / stack overflow bug in the memory info screen.
These wavy teleport animations point to a quite frustrating architectural
issue in this fight. It's not even the fact that unblitting the yellow star
sprites rips temporary holes into Elis' sprite; that's almost expected from
TH01 at this point. Instead, it's all because of this unused frame of the
animation:
With this sprite still being part of BOSS5.BOS, Girl-Elis has a
total of 9 animation frames, 1 more than the
📝 8 per-entity sprites allowed by ZUN's architecture.
The quick and easy solution would have been to simply bump the sprite array
size by 1, but… nah, this would have added another 20 bytes to all 6 of the
.BOS image slots. Instead, ZUN wrote the manual
position synchronization code I mentioned in that 2020 blog post.
Ironically, he then copy-pasted this snippet of code often enough that it
ended up taking up more than 120 bytes in the Elis fight alone – with, you
guessed it, some of those copies being redundant. Not to mention that just
going from 8 to 9 sprites would have allowed ZUN to go down from 6 .BOS
image slots to 3. That would have actually saved 420 bytes in
addition to the manual synchronization trouble. Looking forward to SinGyoku,
that's going to be fun again…
As for the fight itself, it doesn't take long until we reach its most janky
danmaku pattern, right in phase 1:
For whatever reason, the lower-right quarter of the circle isn't
animated? This animation works by only drawing the new dots added with every
subsequent animation frame, expressed as a tiny arc of a dotted circle. This
arc starts at the animation's current 8-bit angle and ends on the sum of
that angle and a hardcoded constant. In every other (copy-pasted, and
correct) instance of this animation, ZUN uses 0x02 as the
constant, but this one uses… 0.05 for the lower-right quarter?
As in, a 64-bit double constant that truncates to 0 when added
to an 8-bit integer, thus leading to the start and end angles being
identical and the game not drawing anything.
On Easy and Normal, the pattern then spawns 32 bullets along the outline
of the circle, no problem there. On Lunatic though, every one of these
bullets is instead turned into a narrow-angled 5-spread, resulting in 160
pellets… in a game with a pellet cap of 100.
Now, if Elis teleported herself to a position near the top of the playfield,
most of the capped pellets would have been clipped at that top edge anyway,
since the bullets are spawned in clockwise order starting at Elis' right
side with an angle of 0x00. On lower positions though, you can
definitely see a difference if the cap were high enough to allow all coded
pellets to actually be spawned.
The Hard version gets dangerously close to the cap by spawning a total of 96
pellets. Since this is the only pattern in phase 1 that fires pellets
though, you are guaranteed to see all of the unclipped ones.
The pellets also aren't spawned exactly on the telegraphed circle, but 4 pixels to the left.
Then again, it might very well be that all of this was intended, or, most
likely, just left in the game as a happy accident. The latter interpretation
would explain why ZUN didn't just delete the rendering calls for the
lower-right quarter of the circle, because seriously, how would you not spot
that? The phase 3 patterns continue with more minor graphical glitches that
aren't even worth talking about anymore.
And then Elis transforms into her bat form at the beginning of Phase 5,
which displays some rather unique hitboxes. The one against the Orb is fine,
but the one against player shots…
… uses the bat's X coordinate for both X and Y dimensions.
In regular gameplay, it's not too bad as most
of the bat patterns fire aimed pellets which typically don't allow you to
move below her sprite to begin with. But if you ever tried destroying these
pellets while standing near the middle of the playfield, now you know why
that didn't work. This video also nicely points out how the bat, like any
boss sprite, is only ever blitted at positions on the 8×1-pixel VRAM byte
grid, while collision detection uses the actual pixel position.
The bat form patterns are all relatively simple, with little variation
depending on the difficulty level, except for the "slow pellet spreads"
pattern. This one is almost easiest to dodge on Lunatic, where the 5-spreads
are not only always fired downwards, but also at the hardcoded narrow delta
angle, leaving plenty of room for the player to move out of the way:
Finally, we've got another potential timesave in the girl form's "safety
circle" pattern:
After the circle spawned completely, you lose a life by moving outside it,
but doing that immediately advances the pattern past the circle part. This
part takes 200 frames, but the defeat animation only takes 82 frames, so
you can save up to 118 frames there.
Final funny tidbit: As with all dynamic entities, this circle is only
blitted to VRAM page 0 to allow easy unblitting. However, it's also kind of
static, and there needs to be some way to keep the Orb, the player shots,
and the pellets from ripping holes into it. So, ZUN just re-blits the circle
every… 4 frames?! 🤪 The same is true for the Star of David and its
surrounding circle, but there you at least get a flash animation to justify
it. All the overlap is actually quite a good reason for not even attempting
to 📝 mess with the hardware color palette instead.
Reproducing the crash was the whole challenge here. Even after moving Elis
and Reimu to the exact positions seen in Pearl's video and setting Elis' HP
to 0 on the exact same frame, everything ran fine for me. It's definitely no
division by 0 this time, the function perfectly guards against that
possibility. The line specified in the function's parameters is always
clipped to the VRAM region as well, so we can also rule out illegal memory
accesses here…
… or can we? Stepping through it all reminded me of how this function brings
unblitting sloppiness to the next level: For each VRAM byte touched, ZUN
actually unblits the 4 surrounding bytes, adding one byte to the left
and two bytes to the right, and using a single 32-bit read and write per
bitplane. So what happens if the function tries to unblit the topmost byte
of VRAM, covering the pixel positions from (0, 0) to (7, 0)
inclusive? The VRAM offset of 0x0000 is decremented to
0xFFFF to cover the one byte to the left, 4 bytes are written
to this address, the CPU's internal offset overflows… and as it turns out,
that is illegal even in Real Mode as of the 80286, and will raise a General Protection
Fault. Which is… ignored by DOSBox-X,
every Neko Project II version in common use, the CSCP
emulators, SL9821, and T98-Next. Only Anex86 accurately emulates the
behavior of real hardware here.
OK, but no laser fired by Elis ever reaches the top-left corner of the
screen. How can such a fault even happen in practice? That's where the
broken laser reset+unblit function comes in: Not only does it just flat out pass the wrong
parameters to the line unblitting function – describing the line
already traveled by the laser and stopping where the laser begins –
but it also passes them
wrongly, in the form of raw 32-bit fixed-point Q24.8 values, with no
conversion other than a truncation to the signed 16-bit pixels expected by
the function. What then follows is an attempt at interpolation and clipping
to find a line segment between those garbage coordinates that actually falls
within the boundaries of VRAM:
right/bottom correspond to a laser's origin position, and
left/top to the leftmost pixel of its moved-out top line. The
bug therefore only occurs with lasers that stopped growing and have started
moving.
Moreover, it will only happen if either (left % 256) or
(right % 256) is ≤ 127 and the other one of the two is ≥ 128.
The typecast to signed 16-bit integers then turns the former into a large
positive value and the latter into a large negative value, triggering the
function's clipping code.
The function then follows Bresenham's
algorithm: left is ensured to be smaller than right
by swapping the two values if necessary. If that happened, top
and bottom are also swapped, regardless of their value – the
algorithm does not care about their order.
The slope in the X dimension is calculated using an integer division of
((bottom - top) /
(right - left)). Both subtractions are done on signed
16-bit integers, and overflow accordingly.
(-left × slope_x) is added to top,
and left is set to 0.
If both top and bottom are < 0 or
≥ 640, there's nothing to be unblitted. Otherwise, the final
coordinates are clipped to the VRAM range of [(0, 0),
(639, 399)].
If the function got this far, the line to be unblitted is now very
likely to reach from
the top-left to the bottom-right corner, starting out at
(0, 0) right away, or
from the bottom-left corner to the top-right corner. In this case,
you'd expect unblitting to end at (639, 0), but thanks to an
off-by-one error,
it actually ends at (640, -1), which is equivalent to
(0, 0). Why add clipping to VRAM offset calculations when
everything else is clipped already, right?
tl;dr: TH01 has a high chance of freezing at a boss defeat sequence if there
are diagonally moving lasers on screen, and if your PC-98 system
raises a General Protection Fault on a 4-byte write to offset
0xFFFF, and if you don't run a TSR with an INT
0Dh handler that might handle this fault differently.
The easiest fix option would be to just remove the attempted laser
unblitting entirely, but that would also have an impact on this game's…
distinctive visual glitches, in addition to touching a whole lot of
code bytes. If I ever get funded to work on a hypothetical TH01 Anniversary
Edition that completely rearchitects the game to fix all these glitches, it
would be appropriate there, but not for something that purports to be the
original game.
(Sidenote to further hype up this Anniversary Edition idea for PC-98
hardware owners: With the amount of performance left on the table at every
corner of this game, I'm pretty confident that we can get it to work
decently on PC-98 models with just an 80286 CPU.)
Since we're in critical infrastructure territory once again, I went for the
most conservative fix with the least impact on the binary: Simply changing
any VRAM offsets >= 0xFFFD to 0x0000 to avoid
the GPF, and leaving all other bugs in place. Sure, it's rather lazy and
"incorrect"; the function still unblits a 32-pixel block there, but adding a
special case for blitting 24 pixels would add way too much code. And
seriously, it's not like anything happens in the 8 pixels between
(24, 0) and (31, 0) inclusive during gameplay to begin with.
To balance out the additional per-row if() branch, I inlined
the VRAM page change I/O, saving two function calls and one memory write per
unblitted row.
That means it's time for a new community_choice_fixes
build, containing the new definitive bugfixed versions of these games:
2022-05-31-community-choice-fixes.zip
Check the th01_critical_fixes
branch for the modified TH01 code. It also contains a fix for the HP bar
heap corruption in test or debug mode – simply changing the ==
comparison to <= is enough to avoid it, and negative HP will
still create aesthetic glitch art.
Once again, I then was left with ½ of a push, which I finally filled with
some FUUIN.EXE code, specifically the verdict screen. The most
interesting part here is the player title calculation, which is quite
sneaky: There are only 6 skill levels, but three groups of
titles for each level, and the title you'll see is picked from a random
group. It looks like this is the first time anyone has documented the
calculation?
As for the levels, ZUN definitely didn't expect players to do particularly
well. With a 1cc being the standard goal for completing a Touhou game, it's
especially funny how TH01 expects you to continue a lot: The code has
branches for up to 21 continues, and the on-screen table explicitly leaves
room for 3 digits worth of continues per 5-stage scene. Heck, these
counts are even stored in 32-bit long variables.
Next up: 📝 Finally finishing the long
overdue Touhou Patch Center MediaWiki update work, while continuing with
Kikuri in the meantime. Originally I wasn't sure about what to do between
Elis and Seihou,
but with Ember2528's surprise
contribution last week, y'all have
demonstrated more than enough interest in the idea of getting TH01 done
sooner rather than later. And I agree – after all, we've got the 25th
anniversary of its first public release coming up on August 15, and I might
still manage to completely decompile this game by that point…
Slight change of plans, because we got instructions for
reliably reproducing the TH04 Kurumi Divide Error crash! Major thanks to
Colin Douglas Howell. With those, it also made sense to immediately look at
the crash in the Stage 4 Marisa fight as well. This way, I could release
both of the obligatory bugfix mods at the same time.
Especially since it turned out that I was wrong: Both crashes are entirely
unrelated to the custom entity structure that would have required PI-centric
progress. They are completely specific to Kurumi's and Marisa's
danmaku-pattern code, and really are two separate bugs
with no connection to each other. All of the necessary research nicely fit
into Arandui's 0.5 pushes, with no further deep understanding
required here.
But why were there still three weeks between Colin's message and this blog
post? DMCA distractions aside: There are no easy fixes this time, unlike
📝 back when I looked at the Stage 5 Yuuka crash.
Just like how division by zero is undefined in mathematics, it's also,
literally, undefined what should happen instead of these two
Divide error crashes. This means that any possible "fix" can
only ever be a fanfiction interpretation of the intentions behind ZUN's
code. The gameplay community should be aware of this, and
might decide to handle these cases differently. And if we
have to go into fanfiction territory to work around crashes in the
canon games, we'd better document what exactly we're fixing here and how, as
comprehensible as possible.
With that out of the way, let's look at Kurumi's crash first, since it's way
easier to grasp. This one is known to primarily happen to new players, and
it's easy to see why:
In one of the patterns in her third phase, Kurumi fires a series of 3
aimed rings from both edges of the playfield. By default (that is, on Normal
and with regular rank), these are 6-way rings.
6 happens to be quite a peculiar number here, due to how rings are
(manually) tuned based on the current "rank" value (playperf)
before being fired. The code, abbreviated for clarity:
Let's look at the range of possible playperf values per
difficulty level:
Easy
Normal
Hard
Lunatic
Extra
playperf_min
4
11
20
22
16
playperf_max
16
24
32
34
20
Edit (2022-05-24): This blog post initially had
26 instead of 16 for playperf_min for the Extra Stage. Thanks
to Popfan for pointing out that typo!
Reducing rank to its minimum on Easy mode will therefore result in a
0-ring after tuning.
To calculate the individual angles of each bullet in a ring, ZUN divides
360° (or, more correctly,
📝 0x100) by the total number of
bullets…
Boom, division by zero.
So, what should the workaround look like? Obviously, we want to modify
neither the default number of ring bullets nor the tuning algorithm – that
would change all other non-crashing variations of this pattern on other
difficulties and ranks, creating a fork of the original gameplay. Instead, I
came up with four possible workarounds that all seemed somewhat logical to
me:
Firing no bullet, i.e., interpreting 0-ring literally. This would
create the only constellation in which a call to the bullet group spawn
functions would not spawn at least one new bullet.
Firing a "1-ring", i.e., a single bullet. This would be consistent with
how the bullet spawn functions behave for "0-way" stack and spread
groups.
Firing a "∞-ring", i.e., 200 bullets, which is as much as the game's cap
on 16×16 bullets would allow. This would poke fun at the whole "division by
zero" idea… but given that we're still talking about Easy Mode (and
especially new players) here, it might be a tad too cruel. Certainly the
most trollish interpretation.
Triggering an immediate Game Over, exchanging the hard crash for a
softer and more controlled shutdown. Certainly the option that would be
closest to the behavior of the original games, and perhaps the only one to
be accepted in Serious, High-Level Play™.
As I was writing this post, it felt increasingly wrong for me to make this
decision. So I once again went to Twitter, where 56.3%
voted in favor of the 1-bullet option. Good that I asked! I myself was
more leaning towards the 0-bullet interpretation, which only got 28.7% of
the vote. Also interesting are the 2.3% in favor of the Game Over option but
I get it, low-rank Easy Mode isn't exactly the most competitive mode of
playing TH04.
There are reports of Kurumi crashing on higher difficulties as well, but I
could verify none of them. If they aren't fixed by this workaround, they're
caused by an entirely different bug that we have yet to discover.
Onto the Stage 4 Marisa crash then, which does in fact apply to all
difficulty levels. I was also wrong on this one – it's a hell of a lot more
intricate than being just a division by the number of on-screen bits.
Without having decompiled the entire fight, I can't give a completely
accurate picture of what happens there yet, but here's the rough idea:
Marisa uses different patterns, depending on whether at least one of her
bits is still alive, or all of them have been destroyed.
Destroying the last bit will immediately switch to the bit-less
counterpart of the current pattern.
The bits won't respawn before the pattern ended, which ensures that the
bit-less version is always shown in its entirety after being started or
switched into.
In two of the bit-less patterns, Marisa gradually moves to the point
reflection of her position at the start of the pattern across the playfield
coordinate of (192, 112), or (224, 128) on screen.
The velocity of this movement is determined by both her distance to that
point and the total amount of frames that this instance of the bit-less
pattern will last.
Since this frame amount is directly tied to the frame the player
destroyed the last bit on, it becomes a user-controlled variable. I think
you can see where this is going…
The last 12 frames of this duration, however, are always reserved for a
"braking phase", where Marisa's velocity is halved on each frame.
This part of the code only runs every 4 frames though. This expands the
time window for this crash to 4 frames, rather than just the two frames you
would expect from looking at the division itself.
Both of the broken patterns run for a maximum of 160 frames. Therefore,
the crash will occur when Marisa's last bit is destroyed between frame 152
and 155 inclusive. On these frames, the
last_frame_with_bits_alive variable is set to 148, which is the
crucial 12 duration frames away from the maximum of 160.
Interestingly enough, the calculated velocity is also only
applied every 4 frames, with Marisa actually staying still for the 3 frames
inbetween. As a result, she either moves
too slowly to ever actually reach the yellow point if the last bit
was destroyed early in the pattern (see destruction frames 68 or
112),
or way too quickly, and almost in a jerky, teleporting way (see
destruction frames 144 or 148).
Finally, as you may have already gathered from the formula: Destroying
the last bit between frame 156 and 160 inclusive results in
duration values of 8 or 4. These actually push Marisa
away from the intended point, as the divisor becomes negative.
tl;dr: "Game crashes if last bit destroyed within 4-frame window near end of
two patterns". For an informed decision on a new movement behavior for these
last 8 frames, we definitely need to know all the details behind the crash
though. Here's what I would interpret into the code:
Not moving at all, i.e., interpreting 0 as the middle ground between
positive and negative movement. This would also make sense because a
12-frame duration implies 100% of the movement to consist of
the braking phase – and Marisa wasn't moving before, after all.
Move at maximum speed, i.e., dividing by 1 rather than 0. Since the
movement duration is still 12 in this case, Marisa will immediately start
braking. In total, she will move exactly ¾ of the way from her initial
position to (192, 112) within the 8 frames before the pattern
ends.
Directly warping to (192, 112) on frame 0, and to the
point-reflected target on 4, respectively. This "emulates" the division by
zero by moving Marisa at infinite speed to the exact two points indicated by
the velocity formula. It also fits nicely into the 8 frames we have to fill
here. Sure, Marisa can't reach these points at any other duration, but why
shouldn't she be able to, with infinite speed? Then again, if Marisa
is far away enough from (192, 112), this workaround would warp her
across the entire playfield. Can Marisa teleport according to lore? I
have no idea…
Triggering an immediate Game O– hell no, this is the Stage 4 boss,
people already hate losing runs to this bug!
Asking Twitter worked great for the Kurumi workaround, so let's do it again!
Gotta attach a screenshot of an earlier draft of this blog post though,
since this stuff is impossible to explain in tweets…
…and it went
through the roof, becoming the most successful ReC98 tweet so far?!
Apparently, y'all really like to just look at descriptions of overly complex
bugs that I'd consider way beyond the typical attention span that can be
expected from Twitter. Unfortunately, all those tweet impressions didn't
quite translate into poll turnout. The results
were pretty evenly split between 1) and 2), with option 1) just coming out
slightly ahead at 49.1%, compared to 41.5% of option 2).
(And yes, I only noticed after creating the poll that warping to both the
green and yellow points made more sense than warping to just one of the two.
Let's hope that this additional variant wouldn't have shifted the results
too much. Both warp options only got 9.4% of the vote after all, and no one
else came up with the idea either. In the end,
you can always merge together your preferred combination of workarounds from
the Git branches linked below.)
So here you go: The new definitive version of TH04, containing not only the
community-chosen Kurumi and Stage 4 Marisa workaround variant, but also the
📝 No-EMS bugfix from last year.
Edit (2022-05-31): This package is outdated, 📝 the current version is here!2022-04-18-community-choice-fixes.zip
Oh, and let's also add spaztron64's TH03 GDC clock fix
from 2019 because why not. This binary was built from the community_choice_fixes
branch, and you can find the code for all the individual workarounds on
these branches:
Again, because it can't be stated often enough: These fixes are
fanfiction. The gameplay community should be aware of
this, and might decide to handle these cases differently.
With all of that taking way more time to evaluate and document, this
research really had to become part of a proper push, instead of just being
covered in the quick non-push blog post I initially intended. With ½ of a
push left at the end, TH05's Stage 1-5 boss background rendering functions
fit in perfectly there. If you wonder how these static backdrop images even
need any boss-specific code to begin with, you're right – it's basically the
same function copy-pasted 4 times, differing only in the backdrop image
coordinates and some other inconsequential details.
Only Sara receives a nice variation of the typical
📝 blocky entrance animation: The usually
opaque bitmap data from ST00.BB is instead used as a transition
mask from stage tiles to the backdrop image, by making clever use of the
tile invalidation system:
TH04 uses the same effect a bit more frequently, for its first three bosses.
Next up: Shinki, for real this time! I've already managed to decompile 10 of
her 11 danmaku patterns within a little more than one push – and yes,
that one is included in there. Looks like I've slightly
overestimated the amount of work required for TH04's and TH05's bosses…
EMS memory! The
infamous stopgap measure between the 640 KiB ("ought to be enough for
everyone") of conventional
memory offered by DOS from the very beginning, and the later XMS standard for
accessing all the rest of memory up to 4 GiB in the x86 Protected Mode. With
an optionally active EMS driver, TH04 and TH05 will make use of EMS memory
to preload a bunch of situational .CDG images at the beginning of
MAIN.EXE:
The "eye catch" game title image, shown while stages are loaded
The character-specific background image, shown while bombing
The player character dialog portraits
TH05 additionally stores the boss portraits there, preloading them
at the beginning of each stage. (TH04 instead keeps them in conventional
memory during the entire stage.)
Once these images are needed, they can then be copied into conventional
memory and accessed as usual.
Uh… wait, copied? It certainly would have been possible to map EMS
memory to a regular 16-bit Real Mode segment for direct access,
bank-switching out rarely used system or peripheral memory in exchange for
the EMS data. However, master.lib doesn't expose this functionality, and
only provides functions for copying data from EMS to regular memory and vice
versa.
But even that still makes EMS an excellent fit for the large image files
it's used for, as it's possible to directly copy their pixel data from EMS
to VRAM. (Yes, I tried!) Well… would, because ZUN doesn't do
that either, and always naively copies the images to newly allocated
conventional memory first. In essence, this dumbs down EMS into just another
layer of the memory hierarchy, inserted between conventional memory and
disk: Not quite as slow as disk, but still requiring that
memcpy() to retrieve the data. Most importantly though: Using
EMS in this way does not increase the total amount of memory
simultaneously accessible to the game. After all, some other data will have
to be freed from conventional memory to make room for the newly loaded data.
The most idiomatic way to define the game-specific layout of the EMS area
would be either a struct or an enum.
Unfortunately, the total size of all these images exceeds the range of a
16-bit value, and Turbo C++ 4.0J supports neither 32-bit enums
(which are silently degraded to 16-bit) nor 32-bit structs
(which simply don't compile). That still leaves raw compile-time constants
though, you only have to manually define the offset to each image in terms
of the size of its predecessor. But instead of doing that, ZUN just placed
each image at a nice round decimal offset, each slightly larger than the
actual memory required by the previous image, just to make sure that
everything fits. This results not only in quite
a bit of unnecessary padding, but also in technically the single
biggest amount of "wasted" memory in PC-98 Touhou: Out of the 180,000 (TH04)
and 320,000 (TH05) EMS bytes requested, the game only uses 135,552 (TH04)
and 175,904 (TH05) bytes. But hey, it's EMS, so who cares, right? Out of all
the opportunities to take shortcuts during development, this is among the
most acceptable ones. Any actual PC-98 model that could run these two games
comes with plenty of memory for this to not turn into an actual issue.
On to the EMS-using functions themselves, which are the definition of
"cross-cutting concerns". Most of these have a fallback path for the non-EMS
case, and keep the loaded .CDG images in memory if they are immediately
needed. Which totally makes sense, but also makes it difficult to find names
that reflect all the global state changed by these functions. Every one of
these is also just called from a single place, so inlining
them would have saved me a lot of naming and documentation trouble
there.
The TH04 version of the EMS allocation code was actually displayed on ZUN's monitor in the
2010 MAG・ネット documentary; WindowsTiger already transcribed the low-quality video image
in 2019. By 2015 ReC98 standards, I would have just run with that, but
the current project goal is to write better code than ZUN, so I didn't. 😛
We sure ain't going to use magic numbers for EMS offsets.
The dialog init and exit code then is completely different in both games,
yet equally cross-cutting. TH05 goes even further in saving conventional
memory, loading each individual player or boss portrait into a single .CDG
slot immediately before blitting it to VRAM and freeing the pixel data
again. People who play TH05 without an active EMS driver are surely going to
enjoy the hard drive access lag between each portrait change…
TH04, on the other hand, also abuses the dialog
exit function to preload the Mugetsu defeat / Gengetsu entrance and
Gengetsu defeat portraits, using a static variable to track how often the
function has been called during the Extra Stage… who needs function
parameters anyway, right?
This is also the function in which TH04 infamously crashes after the Stage 5
pre-boss dialog when playing with Reimu and without any active EMS driver.
That crash is what motivated this look into the games' EMS usage… but the
code looks perfectly fine? Oh well, guess the crash is not related to EMS
then. Next u–
OK, of course I can't leave it like that. Everyone is expecting a fix now,
and I still got half of a push left over after decompiling the regular EMS
code. Also, I've now RE'd every function that could possibly be involved in
the crash, and this is very likely to be the last time I'll be looking at
them.
Turns out that the bug has little to do with EMS, and everything to do with
ZUN limiting the amount of conventional RAM that TH04's
MAIN.EXE is allowed to use, and then slightly miscalculating
this upper limit. Playing Stage 5 with Reimu is the most asset-intensive
configuration in this game, due to the combination of
6 player portraits (Marisa has only 5), at 128×128 pixels each
a 288×256 background for the boss fight, tied in size only with the
ones in the Extra Stage
the additional 96×80 image for the vertically scrolling stars during
the stage, wastefully stored as 4 bitplanes rather than a single one.
This image is never freed, not even at the end of the stage.
Remove any single one of the above points, and this crash would have never
occurred. But with all of them combined, the total amount of memory consumed
by TH04's MAIN.EXE just barely exceeds ZUN's limit of 320,000
bytes, by no more than 3,840 bytes, the size of the star image.
But wait: As we established earlier, EMS does nothing to reduce the amount
of conventional memory used by the game. In fact, if you disabled TH04's EMS
handling, you'd still get this crash even if you are running an EMS
driver and loaded DOS into the High Memory Area to free up as much
conventional RAM as possible. How can EMS then prevent this crash in the
first place?
The answer: It's only because ZUN's usage of EMS bypasses the need to load
the cached images back out of the XOR-encrypted 東方幻想.郷
packfile. Leaving aside the general
stupidity of any game data file encryption*, master.lib's decryption
implementation is also quite wasteful: It uses a separate buffer that
receives fixed-size chunks of the file, before decrypting every individual
byte and copying it to its intended destination buffer. That really
resembles the typical slowness of a C fread() implementation
more than it does the highly optimized ASM code that master.lib purports to
be… And how large is this well-hidden decryption buffer? 4 KiB.
So, looking back at the game, here is what happens once the Stage 5
pre-battle dialog ends:
Reimu's bomb background image, which was previously freed to make space
for her dialog portraits, has to be loaded back into conventional memory
from disk
BB0.CDG is found inside the 東方幻想.郷
packfile
file_ropen() ends up allocating a 4 KiB buffer for the
encrypted packfile data, getting us the decisive ~4 KiB closer to the memory
limit
The .CDG loader tries to allocate 52 608 contiguous bytes for the
pixel data of Reimu's bomb image
This would exceed the memory limit, so hmem_allocbyte()
fails and returns a nullptr
ZUN doesn't check for this case (as usual)
The pixel data is loaded to address 0000:0000,
overwriting the Interrupt Vector Table and whatever comes after
The game crashes
The 4 KiB encryption buffer would only be freed by the corresponding
file_close() call, which of course never happens because the
game crashes before it gets there. At one point, I really did suspect the
cause to be some kind of memory leak or fragmentation inside master.lib,
which would have been quite delightful to fix.
Instead, the most straightforward fix here is to bump up that memory limit
by at least 4 KiB. Certainly easier than squeezing in a
cdg_free() call for the star image before the pre-boss dialog
without breaking position dependence.
Or, even better, let's nuke all these memory limits from orbit
because they make little sense to begin with, and fix every other potential
out-of-memory crash that modders would encounter when adding enough data to
any of the 4 games that impose such limits on themselves. Unless you want to
launch other binaries (which need to do their own memory allocations) after
launching the game, there's really no reason to restrict the amount of
memory available to a DOS process. Heck, whenever DOS creates a new one, it
assigns all remaining free memory by default anyway.
Removing the memory limits also removes one of ZUN's few error checks, which
end up quitting the game if there isn't at least a given maximum amount of
conventional RAM available. While it might be tempting to reserve enough
memory at the beginning of execution and then never check any allocation for
a potential failure, that's exactly where something like TH04's crash
comes from.
This game is also still running on DOS, where such an initial allocation
failure is very unlikely to happen – no one fills close to half of
conventional RAM with TSRs and then tries running one of these games. It
might have been useful to detect systems with less than 640 KiB of
actual, physical RAM, but none of the PC-98 models with that little amount
of memory are fast enough to run these games to begin with. How ironic… a
place where ZUN actually added an error check, and then it's mostly
pointless.
Here's an archive that contains both fix variants, just in case. These were
compiled from the th04_noems_crash_fix
and mem_assign_all
branches, and contain as little code changes as possible. Edit (2022-04-18): For TH04, you probably want to download
the 📝 community choice fix package instead,
which contains this fix along with other workarounds for the Divide
error crashes.
2021-11-29-Memory-limit-fixes.zip
So yeah, quite a complex bug, leaving no time for the TH03 scorefile format
research after all. Next up: Raising prices.