So, TH02! Being the only game whose main binary hadn't seen any dedicated
attention ever, we get to start the TH02-related blog posts at the very
beginning with the most foundational pieces of code. The stage tile system
is the best place to start here: It not only blocks every entity that is
rendered on top of these tiles, but is curiously placed right next to
master.lib code in TH02, and would need to be separated out into its own
translation unit before we can do the same with all the master.lib
functions.
In late 2018, I already RE'd
📝 TH04's and TH05's stage tile implementation, but haven't properly documented it on this
blog yet, so this post is also going to include the details that are unique
to those games. On a high level, the stage tile system works identically in
all three games:
The tiles themselves are 16×16 pixels large, and a stage can use 100 of
them at the same time.
The optimal way of blitting tiles would involve VRAM-to-VRAM copies
within the same page using the EGC, and that's exactly what the games do.
All tiles are stored on both VRAM pages within the rightmost 64×400 pixels
of the screen just right next to the HUD, and you only don't see them
because the games cover the same area in text RAM with black cells:
To reduce the memory required for a map, tiles are arranged into fixed
vertical sections of a game-specific constant size.
The actual stage map then is simply a list of these tile sections,
ordered from the start/bottom to the top/end.
Any manipulation of specific tiles within the fixed tile sections has to
be hardcoded. An example can be found right in Stage 1, where the Shrine
Tank leaves track marks on the tiles it appears to drive over:
This video also shows off the two issues with Touhou's first-ever
midboss: The replaced tiles are rendered below the midboss
during their first 4 frames, and maybe ZUN should have stopped the
tile replacements one row before the timeout. The first one is
clearly a bug, but it's not so clear-cut with the second one. I'd
need to look at the code to tell for sure whether it's a quirk or a
bug.
The differences between the three games can best be summarized in a table:
TH02
TH04
TH05
Tile image file extension
.MPN
Tile section format
.MAP
Tile section order defined as part of
.DT1
.STD
Tile section index format
0-based ID
0-based ID × 2
Tile image index format
Index between 0 and 100, 1 byte
VRAM offset in tile source area, 2 bytes
Scroll speed control
Hardcoded
Part of the .STD format, defined per referenced tile
section
Redraw granularity
Full tiles (16×16)
Half tiles (16×8)
Rows per tile section
8
5
Maximum number of tile sections
16
32
Lowest number of tile sections used
5 (Stage 3 / Extra)
8 (Stage 6)
11 (Stage 2 / 4)
Highest number of tile sections used
13 (Stage 4)
19 (Extra)
24 (Stage 3)
Maximum length of a map
320 sections (static buffer)
256 sections (format limitation)
Shortest map
14 sections (Stage 5)
20 sections (Stage 5)
15 sections (Stage 2)
Longest map
143 sections (Stage 4)
95 sections (Stage 4)
40 sections (Stage 1 / 4 / Extra)
The most interesting part about stage tiles is probably the fact that some
of the .MAP files contain unused tile sections. 👀 Many
of these are empty, duplicates, or don't really make sense, but a few
are unique, fit naturally into their respective stage, and might have
been part of the map during development. In TH02, we can find three unused
sections in Stage 5:
The non-empty tile sections defined in TH02's STAGE4.MAP,
showing off three unused ones.
These unused tile sections are much more common in the later games though,
where we can find them in TH04's Stage 3, 4, and 5, and TH05's Stage 1, 2,
and 4. I'll document those once I get to finalize the tile rendering code of
these games, to leave some more content for that blog post. TH04/TH05 tile
code would be quite an effective investment of your money in general, as
most of it is identical across both games. Or how about going for a full-on
PC-98 Touhou map viewer and editor GUI?
Compared to TH04 and TH05, TH02's stage tile code definitely feels like ZUN
was just starting to understand how to pull off smooth vertical scrolling on
a PC-98. As such, it comes with a few inefficiencies and suboptimal
implementation choices:
The redraw flag for each tile is stored in a 24×25 bool
array that does nothing with 7 of the 8 bits.
During bombs and the Stage 4, 5, and Extra bosses, the game disables the
tile system to render more elaborate backgrounds, which require the
playfield to be flood-filled with a single color on every frame. ZUN uses
the GRCG's RMW mode rather than TDW mode for this, leaving almost half of
the potential performance on the table for no reason. Literally,
changing modes only involves changing a single constant.
The scroll speed could theoretically be changed at any time. However,
the function that scrolls in new stage tiles can only ever blit part of a
single tile row during every call, so it's up to the caller to ensure
that scrolling always ends up on an exact 16-pixel boundary. TH02 avoids
this problem by keeping the scroll speed constant across a stage, using 2
pixels for Stage 4 and 1 pixel everywhere else.
Since the scroll speed is given in pixels, the slowest speed would be 1
pixel per frame. To allow the even slower speeds seen in the final game,
TH02 adds a separate scroll interval variable that only runs the
scroll function every 𝑛th frame, effectively adding a prescaler to the
scroll speed. In TH04 and TH05, the speed is specified as a Q12.4 value
instead, allowing true fractional speeds at any multiple of
1/16 pixels. This also necessitated a fixed algorithm
that correctly blits tile lines from two rows.
Finally, we've got a few inconsistencies in the way the code handles the
two VRAM pages, which cause a few unnecessary tiles to be rendered to just
one of the two pages. Mentioning that just in case someone tries to play
this game with a fully cleared text RAM and wonders where the flickering
tiles come from.
Even though this was ZUN's first attempt at scrolling tiles, he already saw
it fit to write most of the code in assembly. This was probably a reaction
to all of TH01's performance issues, and the frame rate reduction
workarounds he implemented to keep the game from slowing down too much in
busy places. "If TH01 was all C++ and slow, TH02 better contain more ASM
code, and then it will be fast, right?"
Another reason for going with ASM might be found in the kind of
documentation that may have been available to ZUN. Last year, the PC-98
community discovered and scanned two new game programming tutorial books
from 1991 (1, 2).
Their example code is not only entirely written in assembly, but restricts
itself to the bare minimum of x86 instructions that were available on the
8086 CPU used by the original PC-9801 model 9 years earlier. Such code is
not only suboptimal
on the 486, but can often be actually worse than what your C++
compiler would generate. TH02 is where the trend of bad hand-written ASM
code started, and it
📝 only intensified in ZUN's later games. So,
don't copy code from these books unless you absolutely want to target the
earlier 8086 and 286 models. Which,
📝 as we've gathered from the recent blitting benchmark results,
are not all too common among current real-hardware owners.
That said, all that ASM code really only impacts readability and
maintainability. Apart from the aforementioned issues, the algorithms
themselves are mostly fine – especially since most EGC and GRCG operations
are decently batched this time around, in contrast to TH01.
Luckily, the tile functions merely use inline assembly within a
typical C function and can therefore be at least part of a C++ source file,
even if the result is pretty ugly. This time, we can actually be sure that
they weren't written directly in a .ASM file, because they feature x86
instruction encodings that can only be generated with Turbo C++ 4.0J's
inline assembler, not with TASM. The same can't unfortunately be said about
the following function in the same segment, which marks the tiles covered by
the spark sprites for redrawing. In this one, it took just one dumb hand-written ASM
inconsistency in the function's epilog to make the entire function
undecompilable.
The standard x86 instruction sequence to set up a stack frame in a function prolog looks like this:
PUSH BP
MOV BP, SP
SUB SP, ?? ; if the function needs the stack for local variables
When compiling without optimizations, Turbo C++ 4.0J will
replace this sequence with a single ENTER instruction. That one
is two bytes smaller, but much slower on every x86 CPU except for the 80186
where it was introduced.
In functions without local variables, BP and SP
remain identical, and a single POP BP is all that's needed in
the epilog to tear down such a stack frame before returning from the
function. Otherwise, the function needs an additional MOV SP,
BP instruction to pop all local variables. With x86 being the helpful
CISC architecture that it is, the 80186 also introduced the
LEAVE instruction to perform both tasks. Unlike
ENTER, this single instruction
is faster than the raw two instructions on a lot of x86 CPUs (and
even current ones!), and it's always smaller, taking up just 1 byte instead
of 3. So what if you use LEAVE even if your function
doesn't use local variables? The fact that the
instruction first does the equivalent of MOV SP, BP doesn't
matter if these registers are identical, and who cares about the additional
CPU cycles of LEAVE compared to just POP BP,
right? So that's definitely something you could theoretically do, but
not something that any compiler would ever generate.
And so, TH02 MAIN.EXE decompilation already hits the first
brick wall after two pushes. Awesome! Theoretically,
we could slowly mash through this wall using the 📝 code generator. But having such an inconsistency in the
function epilog would mean that we'd have to keep Turbo C++ 4.0J from
emitting any epilog or prolog code so that we can write our
own. This means that we'd once again have to hide any use of the
SI and DI registers from the compiler… and doing
that requires code generation macros for 22 of the 49 instructions of
the function in question, almost none of which we currently have. So, this
gets quite silly quite fast, especially if we only need to do it
for one single byte.
Instead, wouldn't it be much better if we had a separate build step between
compile and link time that allowed us to replicate mistakes like these by
just patching the compiled .OBJ files? These files still contain the names
of exported functions for linking, which would allow us to look up the code
of a function in a robust manner, navigate to specific instructions using a
disassembler, replace them, and write the modified .OBJ back to disk before
linking. Such a system could then naturally expand to cover all other
decompilation issues, culminating in a full-on optimizer that could even
recreate ZUN's self-modifying code. At that point, we would have sealed away
all of ZUN's ugly ASM code within a separate build step, and could finally
decompile everything into readable C++.
Pulling that off would require a significant tooling investment though.
Patching that one byte in TH02's spark invalidation function could be done
within 1 or 2 pushes, but that's just one issue, and we currently have 32
other .ASM files with undecompilable code. Also, note that this is
fundamentally different from what we're doing with the
debloated branch and the Anniversary Editions. Mistake patching
would purely be about having readable code on master that
compiles into ZUN's exact binaries, without fixing weird
code. The Anniversary Editions go much further and rewrite such code in
a much more fundamental way, improving it further than mistake patching ever
could.
Right now, the Anniversary Editions seem much more
popular, which suggests that people just want 100% RE as fast as
possible so that I can start working on them. In that case, why bother with
such undecompilable functions, and not just leave them in raw and unreadable
x86 opcode form if necessary… But let's first
see how much backer support there actually is for mistake patching before
falling back on that.
The best part though: Once we've made a decision and then covered TH02's
spark and particle systems, that was it, and we will have already RE'd
all ZUN-written PC-98-specific blitting code in this game. Every further
sprite or shape is rendered via master.lib, and is thus decently abstracted.
Guess I'll need to update
📝 the assessment of which PC-98 Touhou game is the easiest to port,
because it sure isn't TH01, as we've seen with all the work required for the first Anniversary Edition build.
Until then, there are still enough parts of the game that don't use any of
the remaining few functions in the _TEXT segment. Previously, I
mentioned in the 📝 status overview blog post
that TH02 had a seemingly weird sprite system, but the spark and point popup
() structures showed that the game just
stores the current and previous position of its entities in a slightly
different way compared to the rest of PC-98 Touhou. Instead of having
dedicated structure fields, TH02 uses two-element arrays indexed with the
active VRAM page. Same thing, and such a pattern even helps during RE since
it's easy to spot once you know what to look for.
There's not much to criticize about the point popup system, except for maybe
a landmine that causes sprite glitches when trying to display more than
99,990 points. Sadly, the final push in this delivery was rounded out by yet
another piece of code at the opposite end of the quality spectrum. The
particle and smear effects for Reimu's bomb animations consist almost
entirely of assembly bloat, which would just be replaced with generic calls
to the generic blitter in this game's future Anniversary Edition.
If I continue to decompile TH02 while avoiding the brick wall, items would
be next, but they probably require two pushes. Next up, therefore:
Integrating Stripe as an alternative payment provider into the order form.
There have been at least three people who reported issues with PayPal, and
Stripe has been working much better in tests. In the meantime, here's a temporary Stripe
order link for everyone. This one is not connected to the cap yet, so
please make sure to stay within whatever value is currently shown on the
front page – I will treat any excess money as donations.
If there's some time left afterward, I might
also add some small improvements to the TH01 Anniversary Edition.
More than three months without any reverse-engineering progress! It's been
way too long. Coincidentally, we're at least back with a surprising 1.25% of
overall RE, achieved within just 3 pushes. The ending script system is not
only more or less the same in TH04 and TH05, but actually originated in
TH03, where it's also used for the cutscenes before stages 8 and 9. This
means that it was one of the final pieces of code shared between three of
the four remaining games, which I got to decompile at roughly 3× the usual
speed, or ⅓ of the price.
The only other bargains of this nature remain in OP.EXE. The
Music Room is largely equivalent in all three remaining games as well, and
the sound device selection, ZUN Soft logo screens, and main/option menus are
the same in TH04 and TH05. A lot of that code is in the "technically RE'd
but not yet decompiled" ASM form though, so it would shift Finalized% more
significantly than RE%. Therefore, make sure to order the new
Finalization option rather than Reverse-engineering if you
want to make number go up.
So, cutscenes. On the surface, the .TXT files look simple enough: You
directly write the text that should appear on the screen into the file
without any special markup, and add commands to define visuals, music, and
other effects at any place within the script. Let's start with the basics of
how text is rendered, which are the same in all three games:
First off, the text area has a size of 480×64 pixels. This means that it
does not correspond to the tiled area painted into TH05's
EDBK?.PI images:
The yellow area is designated for character names.
Since the font weight can be customized, all text is rendered to VRAM.
This also includes gaiji, despite them ignoring the font weight
setting.
The system supports automatic line breaks on a per-glyph basis, which
move the text cursor to the beginning of the red text area. This might seem like a piece of long-forgotten
ancient wisdom at first, considering the absence of automatic line breaks in
Windows Touhou. However, ZUN probably implemented it more out of pure
necessity: Text in VRAM needs to be unblitted when starting a new box, which
is way more straightforward and performant if you only need to worry
about a fixed area.
The system also automatically starts a new (key press-separated) text
box after the end of the 4th line. However, the text cursor is
also unconditionally moved to the top-left corner of the yellow name
area when this happens, which is almost certainly not what you expect, given
that automatic line breaks stay within the red area. A script author might
as well add the necessary text box change commands manually, if you're
forced to anticipate the automatic ones anyway…
Due to ZUN forgetting an unblitting call during the TH05 refactoring of the
box background buffer, this feature is even completely broken in that game,
as any new text will simply be blitted on top of the old one:
Wait, why are we already talking about game-specific differences after
all? Also, note how the ⏎ animation appears one line below where you'd
expect it.
Overall, the system is geared toward exclusively full-width text. As
exemplified by the 2014 static English patches and the screenshots in this
blog post, half-width text is possible, but comes with a lot of
asterisks attached:
Each loop of the script interpreter starts by looking at the next
byte to distinguish commands from text. However, this step also skips
over every ASCII space and control character, i.e., every byte
≤ 32. If you only intend to display full-width glyphs anyway, this
sort of makes sense: You gain complete freedom when it comes to the
physical layout of these script files, and it especially allows commands
to be freely separated with spaces and line breaks for improved
readability. Still, enforcing commands to be separated exclusively by
line breaks might have been even better for readability, and would have
freed up ASCII spaces for regular text…
Non-command text is blindly processed and rendered two bytes at a
time. The rendering function interprets these bytes as a Shift-JIS
string, so you can use half-width characters here. While the
second byte can even be an ASCII 0x20 space due to the
parser's blindness, all half-width characters must still occur in pairs
that can't be interrupted by commands:
As a workaround for at least the ASCII space issue, you can replace
them with any of the unassigned
Shift-JIS lead bytes – 0x80, 0xA0, or
anything between 0xF0 and 0xFF inclusive.
That's what you see in all screenshots of this post that display
half-width spaces.
Finally, did you know that you can hold ESC to fast-forward
through these cutscenes, which skips most frame delays and reduces the rest?
Due to the blocking nature of all commands, the ESC key state is
only updated between commands or 2-byte text groups though, so it can't
interrupt an ongoing delay.
Superficially, the list of game-specific differences doesn't look too long,
and can be summarized in a rather short table:
It's when you get into the implementation that the combined three systems
reveal themselves as a giant mess, with more like 56 differences between the
games. Every single new weird line of code opened up
another can of worms, which ultimately made all of this end up with 24
pieces of bloat and 14 bugs. The worst of these should be quite interesting
for the general PC-98 homebrew developers among my audience:
The final official 0.23 release of master.lib has a bug in
graph_gaiji_put*(). To calculate the JIS X 0208 code point for
a gaiji, it is enough to ADD 5680h onto the gaiji ID. However,
these functions accidentally use ADC instead, which incorrectly
adds the x86 carry flag on top, causing weird off-by-one errors based on the
previous program state. ZUN did fix this bug directly inside master.lib for
TH04 and TH05, but still needed to work around it in TH03 by subtracting 1
from the intended gaiji ID. Anyone up for maintaining a bug-fixed master.lib
repository?
The worst piece of bloat comes from TH03 and TH04 needlessly
switching the visibility of VRAM pages while blitting a new 320×200 picture.
This makes it much harder to understand the code, as the mere existence of
these page switches is enough to suggest a more complex interplay between
the two VRAM pages which doesn't actually exist. Outside this visibility
switch, page 0 is always supposed to be shown, and page 1 is always used
for temporarily storing pixels that are later crossfaded onto page 0. This
is also the only reason why TH03 has to render text and gaiji onto both VRAM
pages to begin with… and because TH04 doesn't, changing the picture in the
middle of a string of text is technically bugged in that game, even though
you only get to temporarily see the new text on very underclocked PC-98
systems.
These performance implications made me wonder why cutscenes even bother with
writing to the second VRAM page anyway, before copying each crossfade step
to the visible one.
📝 We learned in June how costly EGC-"accelerated" inter-page copies are;
shouldn't it be faster to just blit the image once rather than twice?
Well, master.lib decodes .PI images into a packed-pixel format, and
unpacking such a representation into bitplanes on the fly is just about the
worst way of blitting you could possibly imagine on a PC-98. EGC inter-page
copies are already fairly disappointing at 42 cycles for every 16 pixels, if
we look at the i486 and ignore VRAM latencies. But under the same
conditions, packed-pixel unpacking comes in at 81 cycles for every 8
pixels, or almost 4× slower. On lower-end systems, that can easily sum up to
more than one frame for a 320×200 image. While I'd argue that the resulting
tearing could have been an acceptable part of the transition between two
images, it's understandable why you'd want to avoid it in favor of the
pure effect on a slower framerate.
Really makes me wonder why master.lib didn't just directly decode .PI images
into bitplanes. The performance impact on load times should have been
negligible? It's such a good format for
the often dithered 16-color artwork you typically see on PC-98, and
deserves better than master.lib's implementation which is both slow to
decode and slow to blit.
That brings us to the individual script commands… and yes, I'm going to
document every single one of them. Some of their interactions and edge cases
are not clear at all from just looking at the code.
Almost all commands are preceded by… well, a 0x5C lead byte.
Which raises the question of whether we should
document it as an ASCII-encoded \ backslash, or a Shift-JIS-encoded
¥ yen sign. From a gaijin perspective, it seems obvious that it's a
backslash, as it's consistently displayed as one in most of the editors you
would actually use nowadays. But interestingly, iconv
-f shift-jis -t utf-8 does convert any 0x5C
lead bytes to actual ¥ U+00A5 YEN SIGN code points
.
Ultimately, the distinction comes down to the font. There are fonts
that still render 0x5C as ¥, but mainly do so out
of an obvious concern about backward compatibility to JIS X 0201, where this
mapping originated. Unsurprisingly, this group includes MS Gothic/Mincho,
the old Japanese fonts from Windows 3.1, but even Meiryo and Yu
Gothic/Mincho, Microsoft's modern Japanese fonts. Meanwhile, pretty much
every other modern font, and freely licensed ones in particular, render this
code point as \, even if you set your editor to Shift-JIS. And
while ZUN most definitely saw it as a ¥, documenting this code
point as \ is less ambiguous in the long run. It can only
possibly correspond to one specific code point in either Shift-JIS or UTF-8,
and will remain correct even if we later mod the cutscene system to support
full-blown Unicode.
Now we've only got to clarify the parameter syntax, and then we can look at
the big table of commands:
Numeric parameters are read as sequences of up to 3 ASCII digits. This
limits them to a range from 0 to 999 inclusive, with 000 and
0 being equivalent. Because there's no further sentinel
character, any further digit from the 4th one onwards is
interpreted as regular text.
Filename parameters must be terminated with a space or newline and are
limited to 12 characters, which translates to 8.3 basenames without any
directory component. Any further characters are ignored and displayed as
text as well.
Each .PI image can contain up to four 320×200 pictures ("quarters") for
the cutscene picture area. In the script commands, they are numbered like
this:
0
1
2
3
\@
Clears both VRAM pages by filling them with VRAM color 0. 🐞
In TH03 and TH04, this command does not update the internal text area
background used for unblitting. This bug effectively restricts usage of
this command to either the beginning of a script (before the first
background image is shown) or its end (after no more new text boxes are
started). See the image below for an
example of using it anywhere else.
\b2
Sets the font weight to a value between 0 (raw font ROM glyphs) to 3
(very thicc). Specifying any other value has no effect.
🐞 In TH04 and TH05, \b3 leads to glitched pixels when
rendering half-width glyphs due to a bug in the newly micro-optimized
ASM version of
📝 graph_putsa_fx(); see the image below for an example.
In these games, the parameter also directly corresponds to the
graph_putsa_fx() effect function, removing the sanity check
that was present in TH03. In exchange, you can also access the four
dissolve masks for the bold font (\b2) by specifying a
parameter between 4 (fewest pixels) to 7 (most
pixels). Demo video below.
\c15
Changes the text color to VRAM color 15.
\c=字,15
Adds a color map entry: If 字 is the first code point
inside the name area on a new line, the text color is automatically set
to 15. Up to 8 such entries can be registered
before overflowing the statically allocated buffer.
🐞 The comma is assumed to be present even if the color parameter is omitted.
\e0
Plays the sound effect with the given ID.
\f
(no-op)
\fi1
\fo1
Calls master.lib's palette_black_in() or
palette_black_out() to play a hardware palette fade
animation from or to black, spending roughly 1 frame on each of the 16 fade steps.
\fm1
Fades out BGM volume via PMD's AH=02h interrupt call,
in a non-blocking way. The fade speed can range from 1 (slowest) to 127 (fastest).
Values from 128 to 255 technically correspond to
AH=02h's fade-in feature, which can't be used from cutscene
scripts because it requires BGM volume to first be lowered via
AH=19h, and there is no command to do that.
\g8
Plays a blocking 8-frame screen shake
animation.
\ga0
Shows the gaiji with the given ID from 0 to 255
at the current cursor position. Even in TH03, gaiji always ignore the
text delay interval configured with \v.
@3
TH05's replacement for the \ga command from TH03 and
TH04. The default ID of 3 corresponds to the
gaiji. Not to be confused with \@, which starts with a backslash,
unlike this command.
@h
Shows the gaiji.
@t
Shows the gaiji.
@!
Shows the gaiji.
@?
Shows the gaiji.
@!!
Shows the gaiji.
@!?
Shows the gaiji.
\k0
Waits 0 frames (0 = forever) for an advance key to be pressed before
continuing script execution. Before waiting, TH05 crossfades in any new
text that was previously rendered to the invisible VRAM page…
🐞 …but TH04 doesn't, leaving the text invisible during the wait time.
As a workaround, \vp1 can be
used before \k to immediately display that text without a
fade-in animation.
\m$
Stops the currently playing BGM.
\m*
Restarts playback of the currently loaded BGM from the
beginning.
\m,filename
Stops the currently playing BGM, loads a new one from the given
file, and starts playback.
\n
Starts a new line at the leftmost X coordinate of the box, i.e., the
start of the name area. This is how scripts can "change" the name of the
currently speaking character, or use the entire 480×64 pixels without
being restricted to the non-name area.
Note that automatic line breaks already move the cursor into a new line.
Using this command at the "end" of a line with the maximum number of 30
full-width glyphs would therefore start a second new line and leave the
previously started line empty.
If this command moved the cursor into the 5th line of a box,
\s is executed afterward, with
any of \n's parameters passed to \s.
\p
(no-op)
\p-
Deallocates the loaded .PI image.
\p,filename
Loads the .PI image with the given file into the single .PI slot
available to cutscenes. TH04 and TH05 automatically deallocate any
previous image, 🐞 TH03 would leak memory without a manual prior call to
\p-.
\pp
Sets the hardware palette to the one of the loaded .PI image.
\p@
Sets the loaded .PI image as the full-screen 640×400 background
image and overwrites both VRAM pages with its pixels, retaining the
current hardware palette.
\p=
Runs \pp followed by \p@.
\s0
\s-
Ends a text box and starts a new one. Fades in any text rendered to
the invisible VRAM page, then waits 0 frames
(0 = forever) for an advance key to be
pressed. Afterward, the new text box is started with the cursor moved to
the top-left corner of the name area. \s- skips the wait time and starts the new box
immediately.
\t100
Sets palette brightness via master.lib's
palette_settone() to any value from 0 (fully black) to 200
(fully white). 100 corresponds to the palette's original colors.
Preceded by a 1-frame delay unless ESC is held.
\v1
Sets the number of frames to wait between every 2 bytes of rendered
text.
Sets the number of frames to spend on each of the 4 fade
steps when crossfading between old and new text. The game-specific
default value is also used before the first use of this command.
\v2
\vp0
Shows VRAM page 0. Completely useless in
TH03 (this game always synchronizes both VRAM pages at a command
boundary), only of dubious use in TH04 (for working around a bug in \k), and the games always return to
their intended shown page before every blitting operation anyway. A
debloated mod of this game would just remove this command, as it exposes
an implementation detail that script authors should not need to worry
about. None of the original scripts use it anyway.
\w64
\w and \wk wait for the given number
of frames
\wm and \wmk wait until PMD has played
back the current BGM for the total number of measures, including
loops, given in the first parameter, and fall back on calling
\w and \wk with the second parameter as
the frame number if BGM is disabled.
🐞 Neither PMD nor MMD reset the internal measure when stopping
playback. If no BGM is playing and the previous BGM hasn't been
played back for at least the given number of measures, this command
will deadlock.
Since both TH04 and TH05 fade in any new text from the invisible VRAM
page, these commands can be used to simulate TH03's typing effect in
those games. Demo video below.
Contrary to \k and \s, specifying 0 frames would
simply remove any frame delay instead of waiting forever.
The TH03-exclusive k variants allow the delay to be
interrupted if ⏎ Return or Shot are held down.
TH04 and TH05 recognize the k as well, but removed its
functionality.
All of these commands have no effect if ESC is held.
\wm64,64
\wk64
\wmk64,64
\wi1
\wo1
Calls master.lib's palette_white_in() or
palette_white_out() to play a hardware palette fade
animation from or to white, spending roughly 1 frame on each of the 16 fade steps.
\=4
Immediately displays the given quarter of the loaded .PI image in
the picture area, with no fade effect. Any value ≥ 4 resets the picture area to black.
\==4,1
Crossfades the picture area between its current content and quarter
#4 of the loaded .PI image, spending 1 frame on each of the 4 fade steps unless
ESC is held. Any value ≥ 4 is
replaced with quarter #0.
\$
Stops script execution. Must be called at the end of each file;
otherwise, execution continues into whatever lies after the script
buffer in memory.
TH05 automatically deallocates the loaded .PI image, TH03 and TH04
require a separate manual call to \p- to not leak its memory.
Bold values signify the default if the parameter
is omitted; \c is therefore
equivalent to \c15.
The \@ bug. Yes, the ¥ is fake. It
was easier to GIMP it than to reword the sentences so that the backslashes
landed on the second byte of a 2-byte half-width character pair.
The font weights and effects available through \b, including the glitch with
\b3 in TH04 and TH05.
Font weight 3 is technically not rendered correctly in TH03 either; if
you compare 1️⃣ with 4️⃣, you notice a single missing column of pixels
at the left side of each glyph, which would extend into the previous
VRAM byte. Ironically, the TH04/TH05 version is more correct in
this regard: For half-width glyphs, it preserves any further pixel
columns generated by the weight functions in the high byte of the 16-dot
glyph variable. Unlike TH03, which still cuts them off when rendering
text to unaligned X positions (3️⃣), TH04 and TH05 do bit-rotate them
towards their correct place (4️⃣). It's only at byte-aligned X positions
(2️⃣) where they remain at their internally calculated place, and appear
on screen as these glitched pixel columns, 15 pixels away from the glyph
they belong to. It's easy to blame bugs like these on micro-optimized
ASM code, but in this instance, you really can't argue against it if the
original C++ version was equally incorrect.
Combining \b and s- into a partial dissolve
animation. The speed can be controlled with \v.
Simulating TH03's typing effect in TH04 and TH05 via \w. Even prettier in TH05 where we
also get an additional fade animation
after the box ends.
So yeah, that's the cutscene system. I'm dreading the moment I will have to
deal with the other command interpreter in these games, i.e., the
stage enemy system. Luckily, that one is completely disconnected from any
other system, so I won't have to deal with it until we're close to finishing
MAIN.EXE… that is, unless someone requests it before. And it
won't involve text encodings or unblitting…
The cutscene system got me thinking in greater detail about how I would
implement translations, being one of the main dependencies behind them. This
goal has been on the order form for a while and could soon be implemented
for these cutscenes, with 100% PI being right around the corner for the TH03
and TH04 cutscene executables.
Once we're there, the "Virgin" old-school way of static translation patching
for Latin-script languages could be implemented fairly quickly:
Establish basic UTF-8 parsing for less painful manual editing of the
source files
Procedurally generate glyphs for the few required additional letters
based on existing font ROM glyphs. For example, we'd generate ä
by painting two short lines on top of the font ROM's a glyph,
or generate ¿ by vertically flipping the question mark. This
way, the text retains a consistent look regardless of whether the translated
game is run with an NEC or EPSON font ROM, or the that Neko Project II auto-generates if you
don't provide either.
(Optional) Change automatic line breaks to work on a per-word
basis, rather than per-glyph
That's it – script editing and distribution would be handled by your local
translation group. It might seem as if this would also work for Greek and
Cyrillic scripts due to their presence in the PC-98 font ROM, but I'm not
sure if I want to attempt procedurally shrinking these glyphs from 16×16 to
8×16… For any more thorough solution, we'd need to go for a more "Chad" kind
of full-blown translation support:
Implement text subdivisions at a sensible granularity while retaining
automatic line and box breaks
Compile translatable text into a Japanese→target language dictionary
(I'm too old to develop any further translation systems that would overwrite
modded source text with translations of the original text)
Implement a custom Unicode font system (glyphs would be taken from GNU
Unifont unless translators provide a different 8×16 font for their
language)
Combine the text compiler with the font compiler to only store needed
glyphs as part of the translation's font file (dealing with a multi-MB font
file would be rather ugly in a Real Mode game)
Write a simple install/update/patch stacking tool that supports both
.HDI and raw-file DOSBox-X scenarios (it's different enough from thcrap to
warrant a separate tool – each patch stack would be statically compiled into
a single package file in the game's directory)
Add a nice language selection option to the main menu
(Optional) Support proportional fonts
Which sounds more like a separate project to be commissioned from
Touhou Patch Center's Open Collective funds, separate from the ReC98 cap.
This way, we can make sure that the feature is completely implemented, and I
can talk with every interested translator to make sure that their language
works.
It's still cheaper overall to do this on PC-98 than to first port the games
to a modern system and then translate them. On the other hand, most
of the tasks in the Chad variant (3, 4, 5, and half of 2) purely deal with
the difficulty of getting arbitrary Unicode characters to work natively in a
PC-98 DOS game at all, and would be either unnecessary or trivial if we had
already ported the game. Depending on where the patrons' interests lie, it
may not be worth it. So let's see what all of you think about which
way we should go, or whether it's worth doing at all. (Edit
(2022-12-01): With Splashman's
order towards the stage dialogue system, we've pretty much confirmed that it
is.) Maybe we want to meet in the middle – using e.g. procedural glyph
generation for dynamic translations to keep text rendering consistent with
the rest of the PC-98 system, and just not support non-Latin-script
languages in the beginning? In any case, I've added both options to the
order form. Edit (2023-07-28):Touhou Patch Center has agreed to fund
a basic feature set somewhere between the Virgin and Chad level. Check the
📝 dedicated announcement blog post for more
details and ideas, and to find out how you can support this goal!
Surprisingly, there was still a bit of RE work left in the third push after
all of this, which I filled with some small rendering boilerplate. Since I
also wanted to include TH02's playfield overlay functions,
1/15 of that last push went towards getting a
TH02-exclusive function out of the way, which also ended up including that
game in this delivery.
The other small function pointed out how TH05's Stage 5 midboss pops into
the playfield quite suddenly, since its clipping test thinks it's only 32
pixels tall rather than 64:
Good chance that the pop-in might have been intended. Edit (2023-06-30): Actually, it's a
📝 systematic consequence of ZUN having to work around the lack of clipping in master.lib's sprite functions.
There's even another quirk here: The white flash during its first frame
is actually carried over from the previous midboss, which the
game still considers as actively getting hit by the player shot that
defeated it. It's the regular boilerplate code for rendering a
midboss that resets the responsible damage variable, and that code
doesn't run during the defeat explosion animation.
Next up: Staying with TH05 and looking at more of the pattern code of its
boss fights. Given the remaining TH05 budget, it makes the most sense to
continue in in-game order, with Sara and the Stage 2 midboss. If more money
comes in towards this goal, I could alternatively go for the Mai & Yuki
fight and immediately develop a pretty fix for the cheeto storage
glitch. Also, there's a rather intricate
pull request for direct ZMBV decoding on the website that I've still got
to review…
TH05 has passed the 50% RE mark, with both MAIN.EXE and the
game as a whole! With that, we've also reached what -Tom-
wanted out of the project, so he's suspending his discount offer for a
bit.
Curve bullets are now officially called cheetos! 76.7% of
fans prefer this term, and it fits into the 8.3 DOS filename scheme much
better than homing lasers (as they're called in
OMAKE.TXT) or Taito
lasers (which would indeed have made sense as well).
…oh, and I managed to decompile Shinki within 2 pushes after all. That
left enough budget to also add the Stage 1 midboss on top.
So, Shinki! As far as final boss code is concerned, she's surprisingly
economical, with 📝 her background animations
making up more than ⅓ of her entire code. Going straight from TH01's
📝 final📝 bosses
to TH05's final boss definitely showed how much ZUN had streamlined
danmaku pattern code by the end of PC-98 Touhou. Don't get me wrong, there
is still room for improvement: TH05 not only
📝 reuses the same 16 bytes of generic boss state we saw in TH04 last month,
but also uses them 4× as often, and even for midbosses. Most importantly
though, defining danmaku patterns using a single global instance of the
group template structure is just bad no matter how you look at it:
The script code ends up rather bloated, with a single MOV
instruction for setting one of the fields taking up 5 bytes. By comparison,
the entire structure for regular bullets is 14 bytes large, while the
template structure for Shinki's 32×32 ball bullets could have easily been
reduced to 8 bytes.
Since it's also one piece of global state, you can easily forget to set
one of the required fields for a group type. The resulting danmaku group
then reuses these values from the last time they were set… which might have
been as far back as another boss fight from a previous stage.
And of course, I wouldn't point this out if it
didn't actually happen in Shinki's pattern code. Twice.
Declaring a separate structure instance with the static data for every
pattern would be both safer and more space-efficient, and there's
more than enough space left for that in the game's data segment.
But all in all, the pattern functions are short, sweet, and easy to follow.
The "devil"
patternis significantly more complex than the others, but still
far from TH01's final bosses at their worst. I especially like the clear
architectural separation between "one-shot pattern" functions that return
true once they're done, and "looping pattern" functions that
run as long as they're being called from a boss's main function. Not many
all too interesting things in these pattern functions for the most part,
except for two pieces of evidence that Shinki was coded after Yumeko:
The gather animation function in the first two phases contains a bullet
group configuration that looks like it's part of an unused danmaku
pattern. It quickly turns out to just be copy-pasted from a similar function
in Yumeko's fight though, where it is turned into actual
bullets.
As one of the two places where ZUN forgot to set a template field, the
lasers at the end of the white wing preparation pattern reuse the 6-pixel
width of Yumeko's final laser pattern. This actually has an effect on
gameplay: Since these lasers are active for the first 8 frames after
Shinki's wings appear on screen, the player can get hit by them in the last
2 frames after they grew to their final width.
Of course, there are more than enough safespots between the lasers.
Speaking about that wing sprite: If you look at ST05.BB2 (or
any other file with a large sprite, for that matter), you notice a rather
weird file layout:
A large sprite split into multiple smaller ones with a width of
64 pixels each? What's this, hardware sprite limitations? On my
PC-98?!
And it's not a limitation of the sprite width field in the BFNT+ header
either. Instead, it's master.lib's BFNT functions which are limited to
sprite widths up to 64 pixels… or at least that's what
MASTER.MAN claims. Whatever the restriction was, it seems to be
completely nonexistent as of master.lib version 0.23, and none of the
master.lib functions used by the games have any issues with larger
sprites.
Since ZUN stuck to the supposed 64-pixel width limit though, it's now the
game that expects Shinki's winged form to consist of 4 physical
sprites, not just 1. Any conversion from another, more logical sprite sheet
layout back into BFNT+ must therefore replicate the original number of
sprites. Otherwise, the sequential IDs ("patnums") assigned to every newly
loaded sprite no longer match ZUN's hardcoded IDs, causing the game to
crash. This is exactly what used to happen with -Tom-'s
MysticTK automation scripts,
which combined these exact sprites into a single large one. This issue has
now been fixed – just in case there are some underground modders out there
who used these scripts and wonder why their game crashed as soon as the
Shinki fight started.
And then the code quality takes a nosedive with Shinki's main function.
Even in TH05, these boss and midboss update
functions are still very imperative:
The origin point of all bullet types used by a boss must be manually set
to the current boss/midboss position; there is no concept of a bullet type
tracking a certain entity.
The same is true for the target point of a player's homing shots…
… and updating the HP bar. At least the initial fill animation is
abstracted away rather decently.
Incrementing the phase frame variable also must be done manually. TH05
even "innovates" here by giving the boss update function exclusive ownership
of that variable, in contrast to TH04 where that ownership is given out to
the player shot collision detection (?!) and boss defeat helper
functions.
Speaking about collision detection: That is done by calling different
functions depending on whether the boss is supposed to be invincible or
not.
Timeout conditions? No standard way either, and all done with manual
if statements. In combination with the regular phase end
condition of lowering (mid)boss HP to a certain value, this leads to quite a
convoluted control flow.
The manual calls to the score bonus functions for cleared phases at least provide some sense of orientation.
One potentially nice aspect of all this imperative freedom is that
phases can end outside of HP boundaries… by manually incrementing the
phase variable and resetting the phase frame variable to 0.
The biggest WTF in there, however, goes to using one of the 16 state bytes
as a "relative phase" variable for differentiating between boss phases that
share the same branch within the switch(boss.phase)
statement. While it's commendable that ZUN tried to reduce code duplication
for once, he could have just branched depending on the actual
boss.phase variable? The same state byte is then reused in the
"devil" pattern to track the activity state of the big jerky lasers in the
second half of the pattern. If you somehow managed to end the phase after
the first few bullets of the pattern, but before these lasers are up,
Shinki's update function would think that you're still in the phase
before the "devil" pattern. The main function then sequence-breaks
right to the defeat phase, skipping the final pattern with the burning Makai
background. Luckily, the HP boundaries are far away enough to make this
impossible in practice.
The takeaway here: If you want to use the state bytes for your custom
boss script mods, alias them to your own 16-byte structure, and limit each
of the bytes to a clearly defined meaning across your entire boss script.
One final discovery that doesn't seem to be documented anywhere yet: Shinki
actually has a hidden bomb shield during her two purple-wing phases.
uth05win got this part slightly wrong though: It's not a complete
shield, and hitting Shinki will still deal 1 point of chip damage per
frame. For comparison, the first phase lasts for 3,000 HP, and the "devil"
pattern phase lasts for 5,800 HP.
And there we go, 3rd PC-98 Touhou boss
script* decompiled, 28 to go! 🎉 In case you were expecting a fix for
the Shinki death glitch: That one
is more appropriately fixed as part of the Mai & Yuki script. It also
requires new code, should ideally look a bit prettier than just removing
cheetos between one frame and the next, and I'd still like it to fit within
the original position-dependent code layout… Let's do that some other
time.
Not much to say about the Stage 1 midboss, or midbosses in general even,
except that their update functions have to imperatively handle even more
subsystems, due to the relative lack of helper functions.
The remaining ¾ of the third push went to a bunch of smaller RE and
finalization work that would have hardly got any attention otherwise, to
help secure that 50% RE mark. The nicest piece of code in there shows off
what looks like the optimal way of setting up the
📝 GRCG tile register for monochrome blitting
in a variable color:
mov ah, palette_index ; Any other non-AL 8-bit register works too.
; (x86 only supports AL as the source operand for OUTs.)
rept 4 ; For all 4 bitplanes…
shr ah, 1 ; Shift the next color bit into the x86 carry flag
sbb al, al ; Extend the carry flag to a full byte
; (CF=0 → 0x00, CF=1 → 0xFF)
out 7Eh, al ; Write AL to the GRCG tile register
endm
Thanks to Turbo C++'s inlining capabilities, the loop body even decompiles
into a surprisingly nice one-liner. What a beautiful micro-optimization, at
a place where micro-optimization doesn't hurt and is almost expected.
Unfortunately, the micro-optimizations went all downhill from there,
becoming increasingly dumb and undecompilable. Was it really necessary to
save 4 x86 instructions in the highly unlikely case of a new spark sprite
being spawned outside the playfield? That one 2D polar→Cartesian
conversion function then pointed out Turbo C++ 4.0J's woefully limited
support for 32-bit micro-optimizations. The code generation for 32-bit
📝 pseudo-registers is so bad that they almost
aren't worth using for arithmetic operations, and the inline assembler just
flat out doesn't support anything 32-bit. No use in decompiling a function
that you'd have to entirely spell out in machine code, especially if the
same function already exists in multiple other, more idiomatic C++
variations.
Rounding out the third push, we got the TH04/TH05 DEMO?.REC
replay file reading code, which should finally prove that nothing about the
game's original replay system could serve as even just the foundation for
community-usable replays. Just in case anyone was still thinking that.
Next up: Back to TH01, with the Elis fight! Got a bit of room left in the
cap again, and there are a lot of things that would make a lot of
sense now:
TH04 would really enjoy a large number of dedicated pushes to catch up
with TH05. This would greatly support the finalization of both games.
Continuing with TH05's bosses and midbosses has shown to be good value
for your money. Shinki would have taken even less than 2 pushes if she
hadn't been the first boss I looked at.
Oh, and I also added Seihou as a selectable goal, for the two people out
there who genuinely like it. If I ever want to quit my day job, I need to
branch out into safer territory that isn't threatened by takedowns, after
all.
Technical debt, part 9… and as it turns out, it's highly impractical to
repay 100% of it at this point in development. 😕
The reason: graph_putsa_fx(), ZUN's function for rendering
optionally boldfaced text to VRAM using the font ROM glyphs, in its
ridiculously micro-optimized TH04 and TH05 version. This one sets the
"callback function" for applying the boldface effect by self-modifying
the target of two CALL rel16 instructions… because
there really wasn't any free register left for an indirect
CALL, eh? The necessary distance, from the call site to the
function itself, has to be calculated at assembly time, by subtracting the
target function label from the call site label.
This usually wouldn't be a problem… if ZUN didn't store the resulting
lookup tables in the .DATA segment. With code segments, we
can easily split them at pretty much any point between functions because
there are multiple of them. But there's only a single .DATA
segment, with all ZUN and master.lib data sandwiched between Borland C++'s
crt0 at the
top, and Borland C++'s library functions at the bottom of the segment.
Adding another split point would require all data after that point to be
moved to its own translation unit, which in turn requires
EXTERN references in the big .ASM file to all that moved
data… in short, it would turn the codebase into an even greater
mess.
Declaring the labels as EXTERN wouldn't work either, since
the linker can't do fancy arithmetic and is limited to simply replacing
address placeholders with one single address. So, we're now stuck with
this function at the bottom of the SHARED segment, for the
foreseeable future.
We can still continue to separate functions off the top of that segment,
though. Pretty much the only thing noteworthy there, so far: TH04's code
for loading stage tile images from .MPN files, which we hadn't
reverse-engineered so far, and which nicely fit into one of
Blue Bolt's pending ⅓ RE contributions. Yup, we finally moved
the RE% bars again! If only for a tiny bit.
Both TH02 and TH05 simply store one pointer to one dynamically allocated
memory block for all tile images, as well as the number of images, in the
data segment. TH04, on the other hand, reserves memory for 8 .MPN slots,
complete with their color palettes, even though it only ever uses the
first one of these. There goes another 458 bytes of conventional RAM… I
should start summing up all the waste we've seen so far. Let's put the
next website contribution towards a tagging system for these blog posts.
At 86% of technical debt in the SHARED segment repaid, we
aren't quite done yet, but the rest is mostly just TH04 needing to catch
up with functions we've already separated. Next up: Getting to that
practical 98.5% point. Since this is very likely to not require a full
push, I'll also decompile some more actual TH04 and TH05 game code I
previously reverse-engineered – and after that, reopen the store!
Alright, no more big code maintenance tasks that absolutely need to be
done right now. Time to really focus on parts 6 and 7 of repaying
technical debt, right? Except that we don't get to speed up just yet, as
TH05's barely decompilable PMD file loading function is rather…
complicated.
Fun fact: Whenever I see an unusual sequence of x86 instructions in PC-98
Touhou, I first consult the disassembly of Wolfenstein 3D. That game was
originally compiled with the quite similar Borland C++ 3.0, so it's quite
helpful to compare its ASM to the
officially released source
code. If I find the instructions in question, they mostly come from
that game's ASM code, leading to the amusing realization that "even John
Carmack was unable to get these instructions out of this compiler"
This time though, Wolfenstein 3D did point me
to Borland's intrinsics for common C functions like memcpy()
and strchr(), available via #pragma intrinsic.
Bu~t those unfortunately still generate worse code than what ZUN
micro-optimized here. Commenting how these sequences of instructions
should look in C is unfortunately all I could do here.
The conditional branches in this function did compile quite nicely
though, clarifying the control flow, and clearly exposing a ZUN
bug: TH05's snd_load() will hang in an infinite loop when
trying to load a non-existing -86 BGM file (with a .M2
extension) if the corresponding -26 BGM file (with a .M
extension) doesn't exist either.
Unsurprisingly, the PMD channel monitoring code in TH05's Music Room
remains undecompilable outside the two most "high-level" initialization
and rendering functions. And it's not because there's data in the
middle of the code segment – that would have actually been possible with
some #pragmas to ensure that the data and code segments have
the same name. As soon as the SI and DI registers are referenced
anywhere, Turbo C++ insists on emitting prolog code to save these
on the stack at the beginning of the function, and epilog code to restore
them from there before returning.
Found that out in
September 2019, and confirmed that there's no way around it. All the
small helper functions here are quite simply too optimized, throwing away
any concern for such safety measures. 🤷
Oh well, the two functions that were decompilable at least indicate
that I do try.
Within that same 6th push though, we've finally reached the one function
in TH05 that was blocking further progress in TH04, allowing that game
to finally catch up with the others in terms of separated translation
units. Feels good to finally delete more of those .ASM files we've
decompiled a while ago… finally!
But since that was just getting started, the most satisfying development
in both of these pushes actually came from some more experiments with
macros and inline functions for near-ASM code. By adding
"unused" dummy parameters for all relevant registers, the exact input
registers are made more explicit, which might help future port authors who
then maybe wouldn't have to look them up in an x86 instruction
reference quite as often. At its best, this even allows us to
declare certain functions with the __fastcall convention and
express their parameter lists as regular C, with no additional
pseudo-registers or macros required.
As for output registers, Turbo C++'s code generation turns out to be even
more amazing than previously thought when it comes to returning
pseudo-registers from inline functions. A nice example for
how this can improve readability can be found in this piece of TH02 code
for polling the PC-98 keyboard state using a BIOS interrupt:
inline uint8_t keygroup_sense(uint8_t group) {
_AL = group;
_AH = 0x04;
geninterrupt(0x18);
// This turns the output register of this BIOS call into the return value
// of this function. Surprisingly enough, this does *not* naively generate
// the `MOV AL, AH` instruction you might expect here!
return _AH;
}
void input_sense(void)
{
// As a result, this assignment becomes `_AH = _AH`, which Turbo C++
// never emits as such, giving us only the three instructions we need.
_AH = keygroup_sense(8);
// Whereas this one gives us the one additional `MOV BH, AH` instruction
// we'd expect, and nothing more.
_BH = keygroup_sense(7);
// And now it's obvious what both of these registers contain, from just
// the assignments above.
if(_BH & K7_ARROW_UP || _AH & K8_NUM_8) {
key_det |= INPUT_UP;
}
// […]
}
I love it. No inline assembly, as close to idiomatic C code as something
like this is going to get, yet still compiling into the minimum possible
number of x86 instructions on even a 1994 compiler. This is how I keep
this project interesting for myself during chores like these.
We might have even reached peak
inline already?
And that's 65% of technical debt in the SHARED segment repaid
so far. Next up: Two more of these, which might already complete that
segment? Finally!
Wow, 31 commits in a single push? Well, what the last push had in
progress, this one had in maintenance. The
📝 master.lib header transition absolutely
had to be completed in this one, for my own sanity. And indeed,
it reduced the build time for the entirety of ReC98 to about 27 seconds on
my system, just as expected in the original announcement. Looking forward
to even faster build times with the upcoming #include
improvements I've got up my sleeve! The port authors of the future are
going to appreciate those quite a bit.
As for the new translation units, the funniest one is probably TH05's
function for blitting the 1-color .CDG images used for the main menu
options. Which is so optimized that it becomes decompilable again,
by ditching the self-modifying code of its TH04 counterpart in favor of
simply making better use of CPU registers. The resulting C code is still a
mess, but what can you do.
This was followed by even more TH05 functions that clearly weren't
compiled from C, as evidenced by their padding
bytes. It's about time I've documented my lack of ideas of how to get
those out of Turbo C++.
And just like in the previous push, I also had to 📝 throw away a decompiled TH02 function purely due to alignment issues. Couldn't have been a better one though, no one's going to miss a residency check for the MMD driver that is largely identical to the corresponding (and indeed decompilable) function for the PMD driver. Both of those should have been merged into a single function anyway, given how they also mutate the game's sound configuration flags…
In the end, I've slightly slowed down with this one, with only 37% of technical debt done after this 4th dedicated push. Next up: One more of these, centered around TH05's stupidly optimized .PI functions. Maybe also with some more reverse-engineering, after not having done any for 1½ months?
So, where to start? Well, TH04 bullets are hard, so let's
procrastinate start with TH03 instead
The 📝 sprite display functions are the
obvious blocker for any structure describing a sprite, and therefore most
meaningful PI gains in that game… and I actually did manage to fit a
decompilation of those three functions into exactly the amount of time
that the Touhou Patch Center community votes alloted to TH03
reverse-engineering!
And a pretty amazing one at that. The original code was so obviously
written in ASM and was just barely decompilable by exclusively using
register pseudovariables and a bit of goto, but I was able to
abstract most of that away, not least thanks to a few helpful optimization
properties of Turbo C++… seriously, I can't stop marveling at this ancient
compiler. The end result is both readable, clear, and dare I say
portable?! To anyone interested in porting TH03,
take a look. How painful would it be to port that away from 16-bit
x86?
However, this push is also a typical example that the RE/PI priorities can
only control what I look at, and the outcome can actually differ
greatly. Even though the priorities were 65% RE and 35% PI, the progress
outcome was +0.13% RE and +1.35% PI. But hey, we've got one more push with
a focus on TH03 PI, so maybe that one will include more RE than
PI, and then everything will end up just as ordered?
The glacial pace continues, with TH05's unnecessarily, inappropriately
micro-optimized, and hence, un-decompilable code for rendering the current
and high score, as well as the enemy health / dream / power bars. While
the latter might still pass as well-written ASM, the former goes to such
ridiculous levels that it ends up being technically buggy. If you
enjoy quality ZUN code, it's
definitely worth a read.
In TH05, this all still is at the end of code segment #1, but in TH04,
the same code lies all over the same segment. And since I really
wanted to move that code into its final form now, I finally did the
research into decompiling from anywhere else in a segment.
Turns out we actually can! It's kinda annoying, though: After splitting
the segment after the function we want to decompile, we then need to group
the two new segments back together into one "virtual segment" matching the
original one. But since all ASM in ReC98 heavily relies on being
assembled in MASM mode, we then start to suffer from MASM's group
addressing quirk. Which then forces us to manually prefix every single
function call
from inside the group
to anywhere else within the newly created segment
with the group name. It's stupidly boring busywork, because of all the
function calls you mustn't prefix. Special tooling might make this
easier, but I don't have it, and I'm not getting crowdfunded for it.
So while you now definitely can request any specific thing in any
of the 5 games to be decompiled right now, it will take slightly
longer, and cost slightly more.
(Except for that one big segment in TH04, of course.)
Only one function away from the TH05 shot type control functions now!
Actually, I lied, and lasers ended up coming with everything that makes reverse-engineering ZUN code so difficult: weirdly reused variables, unexpected structures within structures, and those TH05-specific nasty, premature ASM micro-optimizations that will waste a lot of time during decompilation, since the majority of the code actually was C, except for where it wasn't.