No technical obstacles for once! Just pure overcomplicated ZUN code. Unlike
📝 Konngara's main function, the main TH01
player function was every bit as difficult to decompile as you would expect
from its size.
With TH01 using both separate left- and right-facing sprites for all of
Reimu's moves and separate classes for Reimu's 32×32 and 48×*
sprites, we're already off to a bad start. Sure, sprite mirroring is
minimally more involved on PC-98, as the planar
nature of VRAM requires the bits within an 8-pixel byte to also be
mirrored, in addition to writing the sprite bytes from right to left. TH03
uses a 256-byte lookup table for this, generated at runtime by an infamous
micro-optimized and undecompilable ASM algorithm. With TH01's existing
architecture, ZUN would have then needed to write 3 additional blitting
functions. But instead, he chose to waste a total of 26,112 bytes of memory
on pre-mirrored sprites…
Alright, but surely selecting those sprites from code is no big deal? Just
store the direction Reimu is facing in, and then add some branches to the
rendering code. And there is in fact a variable for Reimu's direction…
during regular arrow-key movement, and another one while shooting and
sliding, and a third as part of the special attack types,
launched out of a slide.
Well, OK, technically, the last two are the same variable. But that's even
worse, because it means that ZUN stores two distinct enums at
the same place in memory: Shooting and sliding uses 1 for left,
2 for right, and 3 for the "invalid" direction of
holding both, while the special attack types indicate the direction in their
lowest bit, with 0 for right and 1 for left. I
decompiled the latter as bitflags, but in ZUN's code, each of the 8
permutations is handled as a distinct type, with copy-pasted and adapted
code… The interpretation of this
two-enum "sub-mode" union variable is controlled
by yet another "mode" variable… and unsurprisingly, two of the bugs in this
function relate to the sub-mode variable being interpreted incorrectly.
Also, "rendering code"? This one big function basically consists of separate
unblit→update→render code snippets for every state and direction Reimu can
be in (moving, shooting, swinging, sliding, special-attacking, and bombing),
pasted together into a tangled mess of nested if(…) statements.
While a lot of the code is copy-pasted, there are still a number of
inconsistencies that defeat the point of my usual refactoring treatment.
After all, with a total of 85 conditional branches, anything more than I did
would have just obscured the control flow too badly, making it even harder
to understand what's going on.
In the end, I spotted a total of 8 bugs in this function, all of which leave
Reimu invisible for one or more frames:
2 frames after all special attacks
2 frames after swing attacks, and
4 frames before swing attacks
Thanks to the last one, Reimu's first swing animation frame is never
actually rendered. So whenever someone complains about TH01 sprite
flickering on an emulator: That emulator is accurate, it's the game that's
poorly written.
And guess what, this function doesn't even contain everything you'd
associate with per-frame player behavior. While it does
handle Yin-Yang Orb repulsion as part of slides and special attacks, it does
not handle the actual player/Orb collision that results in lives being lost.
The funny thing about this: These two things are done in the same function…
Therefore, the life loss animation is also part of another function. This is
where we find the final glitch in this 3-push series: Before the 16-frame
shake, this function only unblits a 32×32 area around Reimu's center point,
even though it's possible to lose a life during the non-deflecting part of a
48×48-pixel animation. In that case, the extra pixels will just stay on
screen during the shake. They are unblitted afterwards though, which
suggests that ZUN was at least somewhat aware of the issue?
Finally, the chance to see the alternate life loss sprite is exactly ⅛.
As for any new insights into game mechanics… you know what? I'm just not
going to write anything, and leave you with this flowchart instead. Here's
the definitive guide on how to control Reimu in TH01 we've been waiting for
24 years:
Pellets are deflected during all gray
states. Not shown is the obvious "double-tap Z and X" transition from
all non-(#1) states to the Bomb state, but that would have made this
diagram even more unwieldy than it turned out. And yes, you can shoot
twice as fast while moving left or right.
While I'm at it, here are two more animations from MIKO.PTN
which aren't referenced by any code:
With that monster of a function taken care of, we've only got boss sprite animation as the final blocker of uninterrupted Sariel progress. Due to some unfavorable code layout in the Mima segment though, I'll need to spend a bit more time with some of the features used there. Next up: The missile bullets used in the Mima and YuugenMagan fights.
Only one newly ordered push since I've reopened the store? Great, that's
all the justification I needed for the extended maintenance delay that was
part of these two pushes 😛
Having to write comments to explain whether coordinates are relative to
the top-left corner of the screen or the top-left corner of the playfield
has finally become old. So, I introduced
distinct
types for all the coordinate systems we typically encounter, applying
them to all code decompiled so far. Note how the planar nature of PC-98
VRAM meant that X and Y coordinates also had to be different from each
other. On the X side, there's mainly the distinction between the
[0; 640] screen space and the corresponding [0; 80] VRAM byte
space. On the Y side, we also have the [0; 400] screen space, but
the visible area of VRAM might be limited to [0; 200] when running in
the PC-98's line-doubled 640×200 mode. A VRAM Y coordinate also always
implies an added offset for vertical scrolling.
During all of the code reconstruction, these types can only have a
documenting purpose. Turning them into anything more than just
typedefs to int, in order to define conversion
operators between them, simply won't recompile into identical binaries.
Modding and porting projects, however, now have a nice foundation for
doing just that, and can entirely lift coordinate system transformations
into the type system, without having to proofread all the meaningless
int declarations themselves.
So, what was left in terms of memory references? EX-Alice's fire waves
were our final unknown entity that can collide with the player. Decently
implemented, with little to say about them.
That left the bomb animation structures as the one big remaining PI
blocker. They started out nice and simple in TH04, with a small 6-byte
star animation structure used for both Reimu and Marisa. TH05, however,
gave each character her own animation… and what the hell is going
on with Reimu's blue stars there? Nope, not going to figure this out on
ASM level.
A decompilation first required some more bomb-related variables to be
named though. Since this was part of a generic RE push, it made sense to
do this in all 5 games… which then led to nice PI gains in anything
but TH05. Most notably, we now got the
"pulling all items to player" flag in TH04 and TH05, which is
actually separate from bombing. The obvious cheat mod is left as an
exercise to the reader.
So, TH05 bomb animations. Just like the
📝 custom entity types of this game, all 4
characters share the same memory, with the superficially same 10-byte
structure.
But let's just look at the very first field. Seen from a low level, it's a
simple struct { int x, y; } pos, storing the current position
of the character-specific bomb animation entity. But all 4 characters use
this field differently:
For Reimu's blue stars, it's the top-left position of each star, in the
12.4 fixed-point format. But unlike the vast majority of these values in
TH04 and TH05, it's relative to the top-left corner of the
screen, not the playfield. Much better represented as
struct { Subpixel screen_x, screen_y; } topleft.
For Marisa's lasers, it's the center of each circle, as a regular 12.4
fixed-point coordinate, relative to the top-left corner of the playfield.
Much better represented as
struct { Subpixel x, y; } center.
For Mima's shrinking circles, it's the center of each circle in regular
pixel coordinates. Much better represented as
struct { screen_x_t x; screen_y_t y; } center.
For Yuuka's spinning heart, it's the top-left corner in regular pixel
coordinates. Much better represented as
struct { screen_x_t x; screen_y_t y; } topleft.
And yes, singular. The game is actually smart enough to only store a single
heart, and then create the rest of the circle on the fly. (If it were even
smarter, it wouldn't even use this structure member, but oh well.)
Therefore, I decompiled it as 4 separate structures once again, bundled
into an union of arrays.
As for Reimu… yup, that's some pointer arithmetic straight out of
Jigoku* for setting and updating the positions of the falling star
trails. While that certainly required several
comments to wrap my head around the current array positions, the one "bug"
in all this arithmetic luckily has no effect on the game.
There is a small glitch with the growing circles, though. They are
spawned at the end of the loop, with their position taken from the star
pointer… but after that pointer has already been incremented. On
the last loop iteration, this leads to an out-of-bounds structure access,
with the position taken from some unknown EX-Alice data, which is 0 during
most of the game. If you look at the animation, you can easily spot these
bugged circles, consistently growing from the top-left corner (0, 0)
of the playfield:
After all that, there was barely enough remaining time to filter out and
label the final few memory references. But now, TH05's
MAIN.EXE is technically position-independent! 🎉
-Tom- is going to work on a pretty extensive demo of this
unprecedented level of efficient Touhou game modding. For a more impactful
effect of both the 100% PI mark and that demo, I'll be delaying the push
covering the remaining false positives in that binary until that demo is
done. I've accumulated a pretty huge backlog of minor maintenance issues
by now…
Next up though: The first part of the long-awaited build system
improvements. I've finally come up with a way of sanely accelerating the
32-bit build part on most setups you could possibly want to build ReC98
on, without making the building experience worse for the other few setups.