OK, TH01 missile bullets. Can we maybe have a well-behaved entity type,
without any weirdness? Just once?
Ehh, kinda. Apart from another 150 bytes wasted on unused structure members,
this code is indeed more on the low end in terms of overall jank. It does
become very obvious why dodging these missiles in the YuugenMagan, Mima, and
Elis fights feels so awful though: An unfair 46×46 pixel hitbox around
Reimu's center pixel, combined with the comeback of
📝 interlaced rendering, this time in every
stage. ZUN probably did this because missiles are the only 16×16 sprite in
TH01 that is blitted to unaligned X positions, which effectively ends up
touching a 32×16 area of VRAM per sprite.
But even if we assume VRAM writes to be the bottleneck here, it would
have been totally possible to render every missile in every frame at roughly
the same amount of CPU time that the original game uses for interlaced
rendering:
Note that all missile sprites only use two colors, white and green.
Instead of naively going with the usual four bitplanes, extract the
pixels drawn in each of the two used colors into their own bitplanes.
master.lib calls this the "tiny format".
Use the GRCG to draw these two bitplanes in the intended white and green
colors, halving the amount of VRAM writes compared to the original
function.
(Not using the .PTN format would have also avoided the inconsistency of
storing the missile sprites in boss-specific sprite slots.)
That's an optimization that would have significantly benefitted the game, in
contrast to all of the fake ones
introduced in later games. Then again, this optimization is
actually something that the later games do, and it might have in fact been
necessary to achieve their higher bullet counts without significant
slowdown.
After some effectively unused Mima sprite effect code that is so broken that
it's impossible to make sense out of it, we get to the final feature I
wanted to cover for all bosses in parallel before returning to Sariel: The
separate sprite background storage for moving or animated boss sprites in
the Mima, Elis, and Sariel fights. But, uh… why is this necessary to begin
with? Doesn't TH01 already reserve the other VRAM page for backgrounds?
Well, these sprites are quite big, and ZUN didn't want to blit them from
main memory on every frame. After all, TH01 and TH02 had a minimum required
clock speed of 33 MHz, half of the speed required for the later three games.
So, he simply blitted these boss sprites to both VRAM pages, leading
the usual unblitting calls to only remove the other sprites on top of the
boss. However, these bosses themselves want to move across the screen…
and this makes it necessary to save the stage background behind them
in some other way.
Enter .PTN, and its functions to capture a 16×16 or 32×32 square from VRAM
into a sprite slot. No problem with that approach in theory, as the size of
all these bigger sprites is a multiple of 32×32; splitting a larger sprite
into these smaller 32×32 chunks makes the code look just a little bit clumsy
(and, of course, slower).
But somewhere during the development of Mima's fight, ZUN apparently forgot
that those sprite backgrounds existed. And once Mima's 🚫 casting sprite is
blitted on top of her regular sprite, using just regular sprite
transparency, she ends up with her infamous third arm:
Ironically, there's an unused code path in Mima's unblit function where ZUN
assumes a height of 48 pixels for Mima's animation sprites rather than the
actual 64. This leads to even clumsier .PTN function calls for the bottom
128×16 pixels… Failing to unblit the bottom 16 pixels would have also
yielded that third arm, although it wouldn't have looked as natural. Still
wouldn't say that it was intentional; maybe this casting sprite was just
added pretty late in the game's development?
So, mission accomplished, Sariel unblocked… at 2¼ pushes. That's quite some time left for some smaller stage initialization
code, which bundles a bunch of random function calls in places where they
logically really don't belong. The stage opening animation then adds a bunch
of VRAM inter-page copies that are not only redundant but can't even be
understood without knowing the hidden internal state of the last VRAM page
accessed by previous ZUN code…
In better news though: Turbo C++ 4.0 really doesn't seem to have any
complexity limit on inlining arithmetic expressions, as long as they only
operate on compile-time constants. That's how we get macro-free,
compile-time Shift-JIS to JIS X 0208 conversion of the individual code
points in the 東方★靈異伝 string, in a compiler from 1994. As long as you
don't store any intermediate results in variables, that is…
But wait, there's more! With still ¼ of a push left, I also went for the
boss defeat animation, which includes the route selection after the SinGyoku
fight.
As in all other instances, the 2× scaled font is accomplished by first
rendering the text at regular 1× resolution to the other, invisible VRAM
page, and then scaled from there to the visible one. However, the route
selection is unique in that its scaled text is both drawn transparently on
top of the stage background (not onto a black one), and can also change
colors depending on the selection. It would have been no problem to unblit
and reblit the text by rendering the 1× version to a position on the
invisible VRAM page that isn't covered by the 2× version on the visible one,
but ZUN (needlessly) clears the invisible page before rendering any text.
Instead, he assigned a separate VRAM color for both
the 魔界 and 地獄 options, and only changed the palette value for
these colors to white or gray, depending on the correct selection. This is
another one of the
📝 rare cases where TH01 demonstrates good use of PC-98 hardware,
as the 魔界へ and 地獄へ strings don't need to be reblitted during the selection process, only the Orb "cursor" does.
Then, why does this still not count as good-code? When
changing palette colors, you kinda need to be aware of everything
else that can possibly be on screen, which colors are used there, and which
aren't and can therefore be used for such an effect without affecting other
sprites. In this case, well… hover over the image below, and notice how
Reimu's hair and the bomb sprites in the HUD light up when Makai is
selected:
This push did end on a high note though, with the generic, non-SinGyoku
version of the defeat animation being an easily parametrizable copy. And
that's how you decompile another 2.58% of TH01 in just slightly over three
pushes.
Now, we're not only ready to decompile Sariel, but also Kikuri, Elis, and
SinGyoku without needing any more detours into non-boss code. Thanks to the
current TH01 funding subscriptions, I can plan to cover most, if not all, of
Sariel in a single push series, but the currently 3 pending pushes probably
won't suffice for Sariel's 8.10% of all remaining code in TH01. We've got
quite a lot of not specifically TH01-related funds in the backlog to pass
the time though.
Due to recent developments, it actually makes quite a lot of sense to take a
break from TH01: spaztron64 has
managed what every Touhou download site so far has failed to do: Bundling
all 5 game onto a single .HDI together with pre-configured PC-98
emulators and a nice boot menu, and hosting the resulting package on a
proper website. While this first release is already quite good (and much
better than my attempt from 2014), there is still a bit of room for
improvement to be gained from specific ReC98 research. Next up,
therefore:
Researching how TH04 and TH05 use EMS memory, together with the cause
behind TH04's crash in Stage 5 when playing as Reimu without an EMS driver
loaded, and
reverse-engineering TH03's score data file format
(YUME.NEM), which hopefully also comes with a way of building a
file that unlocks all characters without any high scores.
Nothing really noteworthy in TH01's stage timer code, just yet another HUD
element that is needlessly drawn into VRAM. Sure, ZUN applies his custom
boldfacing effect on top of the glyphs retrieved from font ROM, but he could
have easily installed those modified glyphs as gaiji.
Well, OK, halfwidth gaiji aren't exactly well documented, and sometimes not
even correctly emulated
📝 due to the same PC-98 hardware oddity I was researching last month.
I've reserved two of the pending anonymous "anything" pushes for the
conclusion of this research, just in case you were wondering why the
outstanding workload is now lower after the two delivered here.
And since it doesn't seem to be clearly documented elsewhere: Every 2 ticks
on the stage timer correspond to 4 frames.
So, TH01 rank pellet speed. The resident pellet speed value is a
factor ranging from a minimum of -0.375 up to a maximum of 0.5 (pixels per
frame), multiplied with the difficulty-adjusted base speed for each pellet
and added on top of that same speed. This multiplier is modified
every time the stage timer reaches 0 and
HARRY UP is shown (+0.05)
for every score-based extra life granted below the maximum number of
lives (+0.025)
every time a bomb is used (+0.025)
on every frame in which the rand value (shown in debug
mode) is evenly divisible by
(1800 - (lives × 200) - (bombs × 50)) (+0.025)
every time Reimu got hit (set to 0 if higher, then -0.05)
when using a continue (set to -0.05 if higher, then -0.125)
Apparently, ZUN noted that these deltas couldn't be losslessly stored in an
IEEE 754 floating-point variable, and therefore didn't store the pellet
speed factor exactly in a way that would correspond to its gameplay effect.
Instead, it's stored similar to Q12.4 subpixels: as a simple integer,
pre-multiplied by 40. This results in a raw range of -15 to 20, which is
what the undecompiled ASM calls still use. When spawning a new pellet, its
base speed is first multiplied by that factor, and then divided by 40 again.
This is actually quite smart: The calculation doesn't need to be aware of
either Q12.4 or the 40× format, as
((Q12.4 * factor×40) / factor×40) still comes out as a
Q12.4 subpixel even if all numbers are integers. The only limiting issue
here would be the potential overflow of the 16-bit multiplication at
unadjusted base speeds of more than 50 pixels per frame, but that'd be
seriously unplayable.
So yeah, pellet speed modifications are indeed gradual, and don't just fall
into the coarse three "high, normal, and low" categories.
That's ⅝ of P0160 done, and the continue and pause menus would make good
candidates to fill up the remaining ⅜… except that it seemed impossible to
figure out the correct compiler options for this code?
The issues centered around the two effects of Turbo C++ 4.0J's
-O switch:
Optimizing jump instructions: merging duplicate successive jumps into a
single one, and merging duplicated instructions at the end of conditional
branches into a single place under a single branch, which the other branches
then jump to
Compressing ADD SP and POP CX
stack-clearing instructions after multiple successive CALLs to
__cdecl functions into a single ADD SP with the
combined parameter stack size of all function calls
But how can the ASM for these functions exhibit #1 but not #2? How
can it be seemingly optimized and unoptimized at the same time? The
only option that gets somewhat close would be -O- -y, which
emits line number information into the .OBJ files for debugging. This
combination provides its own kind of #1, but these functions clearly need
the real deal.
The research into this issue ended up consuming a full push on its own.
In the end, this solution turned out to be completely unrelated to compiler
options, and instead came from the effects of a compiler bug in a totally
different place. Initializing a local structure instance or array like
const uint4_t flash_colors[3] = { 3, 4, 5 };
always emits the { 3, 4, 5 } array into the program's data
segment, and then generates a call to the internal SCOPY@
function which copies this data array to the local variable on the stack.
And as soon as this SCOPY@ call is emitted, the -O
optimization #1 is disabled for the entire rest of the translation
unit?!
So, any code segment with an SCOPY@ call followed by
__cdecl functions must strictly be decompiled from top to
bottom, mirroring the original layout of translation units. That means no
TH01 continue and pause menus before we haven't decompiled the bomb
animation, which contains such an SCOPY@ call. 😕
Luckily, TH01 is the only game where this bug leads to significant
restrictions in decompilation order, as later games predominantly use the
pascal calling convention, in which each function itself clears
its stack as part of its RET instruction.
What now, then? With 51% of REIIDEN.EXE decompiled, we're
slowly running out of small features that can be decompiled within ⅜ of a
push. Good that I haven't been looking a lot into OP.EXE and
FUUIN.EXE, which pretty much only got easy pieces of
code left to do. Maybe I'll end up finishing their decompilations entirely
within these smaller gaps? I still ended up finding one more small
piece in REIIDEN.EXE though: The particle system, seen in the
Mima fight.
I like how everything about this animation is contained within a single
function that is called once per frame, but ZUN could have really
consolidated the spawning code for new particles a bit. In Mima's fight,
particles are only spawned from the top and right edges of the screen, but
the function in fact contains unused code for all other 7 possible
directions, written in quite a bloated manner. This wouldn't feel quite as
unused if ZUN had used an angle parameter instead…
Also, why unnecessarily waste another 40 bytes of
the BSS segment?
But wait, what's going on with the very first spawned particle that just
stops near the bottom edge of the screen in the video above? Well, even in
such a simple and self-contained function, ZUN managed to include an
off-by-one error. This one then results in an out-of-bounds array access on
the 80th frame, where the code attempts to spawn a 41st
particle. If the first particle was unlucky to be both slow enough and
spawned away far enough from the bottom and right edges, the spawning code
will then kill it off before its unblitting code gets to run, leaving its
pixel on the screen until something else overlaps it and causes it to be
unblitted.
Which, during regular gameplay, will quickly happen with the Orb, all the
pellets flying around, and your own player movement. Also, the RNG can
easily spawn this particle at a position and velocity that causes it to
leave the screen more quickly. Kind of impressive how ZUN laid out the
structure
of arrays in a way that ensured practically no effect of this bug on the
game; this glitch could have easily happened every 80 frames instead.
He almost got close to all bugs canceling out each other here!
Next up: The player control functions, including the second-biggest function
in all of PC-98 Touhou.
…or maybe not that soon, as it would have only wasted time to
untangle the bullet update commits from the rest of the progress. So,
here's all the bullet spawning code in TH04 and TH05 instead. I hope
you're ready for this, there's a lot to talk about!
(For the sake of readability, "bullets" in this blog post refers to the
white 8×8 pellets
and all 16×16 bullets loaded from MIKO16.BFT, nothing else.)
But first, what was going on📝 in 2020? Spent 4 pushes on the basic types
and constants back then, still ended up confusing a couple of things, and
even getting some wrong. Like how TH05's "bullet slowdown" flag actually
always prevents slowdown and fires bullets at a constant speed
instead. Or how "random spread" is not the
best term to describe that unused bullet group type in TH04.
Or that there are two distinct ways of clearing all bullets on screen,
which deserve different names:
Bullets are zapped at the end of most midboss and boss phases, and
cleared everywhere else – most notably, during bombs, when losing a
life, or as rewards for extends or a maximized Dream bonus. The
Bonus!! points awarded for zapping bullets are calculated iteratively,
so it's not trivial to give an exact formula for these. For a small number
𝑛 of bullets, it would exactly be 5𝑛³ - 10𝑛² + 15𝑛
points – or, using uth05win's (correct) recursive definition,
Bonus(𝑛) = Bonus(𝑛-1) + 15𝑛² - 5𝑛 + 10.
However, one of the internal step variables is capped at a different number
of points for each difficulty (and game), after which the points only
increase linearly. Hence, "semi-exponential".
On to TH04's bullet spawn code then, because that one can at least be
decompiled. And immediately, we have to deal with a pointless distinction
between regular bullets, with either a decelerating or constant
velocity, and special bullets, with preset velocity changes during
their lifetime. That preset has to be set somewhere, so why have
separate functions? In TH04, this separation continues even down to the
lowest level of functions, where values are written into the global bullet
array. TH05 merges those two functions into one, but then goes too far and
uses self-modifying code to save a grand total of two local variables…
Luckily, the rest of its actual code is identical to TH04.
Most of the complexity in bullet spawning comes from the (thankfully
shared) helper function that calculates the velocities of the individual
bullets within a group. Both games handle each group type via a large
switch statement, which is where TH04 shows off another Turbo
C++ 4.0 optimization: If the range of case values is too
sparse to be meaningfully expressed in a jump table, it usually generates a
linear search through a second value table. But with the -G
command-line option, it instead generates branching code for a binary
search through the set of cases. 𝑂(log 𝑛) as the worst case for a
switch statement in a C++ compiler from 1994… that's so cool.
But still, why are the values in TH04's group type enum all
over the place to begin with?
Unfortunately, this optimization is pretty rare in PC-98 Touhou. It only
shows up here and in a few places in TH02, compared to at least 50
switch value tables.
In all of its micro-optimized pointlessness, TH05's undecompilable version
at least fixes some of TH04's redundancy. While it's still not even
optimal, it's at least a decently written piece of ASM…
if you take the time to understand what's going on there, because it
certainly took quite a bit of that to verify that all of the things which
looked like bugs or quirks were in fact correct. And that's how the code
for this function ended up with 35% comments and blank lines before I could
confidently call it "reverse-engineered"…
Oh well, at least it finally fixes a correctness issue from TH01 and TH04,
where an invalid bullet group type would fill all remaining slots in the
bullet array with identical versions of the first bullet.
Something that both games also share in these functions is an over-reliance
on globals for return values or other local state. The most ridiculous
example here: Tuning the speed of a bullet based on rank actually mutates
the global bullet template… which ZUN then works around by adding a wrapper
function around both regular and special bullet spawning, which saves the
base speed before executing that function, and restores it afterward.
Add another set of wrappers to bypass that exact
tuning, and you've expanded your nice 1-function interface to 4 functions.
Oh, and did I mention that TH04 pointlessly duplicates the first set of
wrapper functions for 3 of the 4 difficulties, which can't even be
explained with "debugging reasons"? That's 10 functions then… and probably
explains why I've procrastinated this feature for so long.
At this point, I also finally stopped decompiling ZUN's original ASM just
for the sake of it. All these small TH05 functions would look horribly
unidiomatic, are identical to their decompiled TH04 counterparts anyway,
except for some unique constant… and, in the case of TH05's rank-based
speed tuning function, actually become undecompilable as soon as we
want to return a C++ class to preserve the semantic meaning of the return
value. Mainly, this is because Turbo C++ does not allow register
pseudo-variables like _AX or _AL to be cast into
class types, even if their size matches. Decompiling that function would
have therefore lowered the quality of the rest of the decompiled code, in
exchange for the additional maintenance and compile-time cost of another
translation unit. Not worth it – and for a TH05 port, you'd already have to
decompile all the rest of the bullet spawning code anyway!
The only thing in there that was still somewhat worth being
decompiled was the pre-spawn clipping and collision detection function. Due
to what's probably a micro-optimization mistake, the TH05 version continues
to spawn a bullet even if it was spawned on top of the player. This might
sound like it has a different effect on gameplay… until you realize that
the player got hit in this case and will either lose a life or deathbomb,
both of which will cause all on-screen bullets to be cleared anyway.
So it's at most a visual glitch.
But while we're at it, can we please stop talking about hitboxes? At least
in the context of TH04 and TH05 bullets. The actual collision detection is
described way better as a kill delta of 8×8 pixels between the
center points of the player and a bullet. You can distribute these pixels
to any combination of bullet and player "hitboxes" that make up 8×8. 4×4
around both the player and bullets? 1×1 for bullets, and 8×8 for the
player? All equally valid… or perhaps none of them, once you keep in mind
that other entity types might have different kill deltas. With that in
mind, the concept of a "hitbox" turns into just a confusing abstraction.
The same is true for the 36×44 graze box delta. For some reason,
this one is not exactly around the center of a bullet, but shifted to the
right by 2 pixels. So, a bullet can be grazed up to 20 pixels right of the
player, but only up to 16 pixels left of the player. uth05win also spotted
this… and rotated the deltas clockwise by 90°?!
Which brings us to the bullet updates… for which I still had to
research a decompilation workaround, because
📝 P0148 turned out to not help at all?
Instead, the solution was to lie to the compiler about the true segment
distance of the popup function and declare its signature far
rather than near. This allowed ZUN to save that ridiculous overhead of 1 additional far function
call/return per frame, and those precious 2 bytes in the BSS segment
that he didn't have to spend on a segment value.
📝 Another function that didn't have just a
single declaration in a common header file… really,
📝 how were these games even built???
The function itself is among the longer ones in both games. It especially
stands out in the indentation department, with 7 levels at its most
indented point – and that's the minimum of what's possible without
goto. Only two more notable discoveries there:
Bullets are the only entity affected by Slow Mode. If the number of
bullets on screen is ≥ (24 + (difficulty * 8) + rank) in TH04,
or (42 + (difficulty * 8)) in TH05, Slow Mode reduces the frame
rate by 33%, by waiting for one additional VSync event every two frames.
The code also reveals a second tier, with 50% slowdown for a slightly
higher number of bullets, but that conditional branch can never be executed
Bullets must have been grazed in a previous frame before they can
be collided with. (Note how this does not apply to bullets that spawned
on top of the player, as explained earlier!)
Whew… When did ReC98 turn into a full-on code review?! 😅 And after all
this, we're still not done with TH04 and TH05 bullets, with all the
special movement types still missing. That should be less than one push
though, once we get to it. Next up: Back to TH01 and Konngara! Now have fun
rewriting the Touhou Wiki Gameplay pages 😛