⮜ Blog

⮜ List of tags

Showing all posts tagged bullet- and th01-

📝 Posted:
🚚 Summary of:
P0201, P0202
9342665...ff49e9e, ff49e9e...4568bf7
💰 Funded by:
Ember2528, Yanga, [Anonymous]
🏷 Tags:
rec98+ th01- gameplay+ boss+ singyoku+ blitting+ glitch+ animation+ bullet-

The positive:

The negative:

The overview:

This time, we're back to the Orb hitbox being a logical 49×49 pixels in SinGyoku's center, and the shot hitbox being the weird one. What happens if you want the shot hitbox to be both offset to the left a bit and stretch the entire width of SinGyoku's sprite? You get a hitbox that ends in mid-air, far away from the right edge of the sprite:

Due to VRAM byte alignment, all player shots fired between gx = 376 and gx = 383 inclusive appear at the same visual X position, but are internally already partly outside the hitbox and therefore won't hit SinGyoku – compare gx = 376 to gx = 380. So much for precisely visualizing hitboxes in this game…

Since the female and male forms also use the sphere entity's coordinates, they share the same hitbox.

Onto the rendering glitches then, which can – you guessed it – all be found in the sphere form's slam movement:

By having the sphere move from the right edge of the playfield to the left, this video demonstrates both the lazy reblitting and broken unblitting at the right edge for negative X velocities. Also, isn't it funny how Reimu can partly disappear from all the sloppy SinGyoku-related unblitting going on after her sprite was blitted?

Due to the low contrast of the sphere against the background, you typically don't notice these glitches, but the white invincibility flashing after a hit really does draw attention to them. This time, all of these glitches aren't even directly caused by ZUN having never learned about the EGC's bit length register – if he just wrote correct code for SinGyoku, none of this would have been an issue. Sigh… I wonder how many more glitches will be caused by improper use of this one function in the last 18% of REIIDEN.EXE.

There's even another bug here, with ZUN hardcoding a horizontal delta of 8 pixels rather than just passing the actual X velocity. Luckily, the maximum movement speed is 6 pixels on Lunatic, and this would have only turned into an additional observable glitch if the X velocity were to exceed 24 pixels. But that just means it's the kind of bug that still drains RE attention to prove that you can't actually observe it in-game under some circumstances.

The 5 pellet patterns are all pretty straightforward, with nothing to talk about. The code architecture during phase 2 does hint towards ZUN having had more creative patterns in mind – especially for the male form, which uses the transformation function's three pattern callback slots for three repetitions of the same pellet group.
There is one more oddity to be found at the very end of the fight:

The first frame of TH01 SinGyoku's defeat animation, showing the sphere blitted on top of a potentially active person form

Right before the defeat white-out animation, the sphere form is explicitly reblitted for no reason, on top of the form that was blitted to VRAM in the previous frame, and regardless of which form is currently active. If SinGyoku was meant to immediately transform back to the sphere form before being defeated, why isn't the person form unblitted before then? Therefore, the visibility of both forms is undeniably canon, and there is some lore meaning to be found here… :thonk:
In any case, that's SinGyoku done! 6th PC-98 Touhou boss fully decompiled, 25 remaining.

No FUUIN.EXE code rounding out the last push for a change, as the 📝 remaining missile code has been waiting in front of SinGyoku for a while. It already looked bad in November, but the angle-based sprite selection function definitely takes the cake when it comes to unnecessary and decadent floating-point abuse in this game.
The algorithm itself is very trivial: Even with 📝 .PTN requiring an additional quarter parameter to access 16×16 sprites, it's essentially just one bit shift, one addition, and one binary AND. For whatever reason though, ZUN casts the 8-bit missile angle into a 64-bit double, which turns the following explicit comparisons (!) against all possible 4 + 16 boundary angles (!!) into FPU operations. :zunpet: Even with naive and readable division and modulo operations, and the whole existence of this function not playing well with Turbo C++ 4.0J's terrible code generation at all, this could have been 3 lines of code and 35 un-inlined constant-time instructions. Instead, we've got this 207-instruction monster… but hey, at least it works. 🤷
The remaining time then went to YuugenMagan's initialization code, which allowed me to immediately remove more declarations from ASM land, but more on that once we get to the rest of that boss fight.

That leaves 76 functions until we're done with TH01! Next up: Card-flipping stage obstacles.

📝 Posted:
🚚 Summary of:
P0165, P0166, P0167
7a0e5d8...f2bca01, f2bca01...e697907, e697907...c2de6ab
💰 Funded by:
🏷 Tags:
rec98+ th01- gameplay+ animation+ blitting+ bullet- glitch+ waste+ boss+ singyoku+ mima-th01+ elis+ tcc+ menu+

OK, TH01 missile bullets. Can we maybe have a well-behaved entity type, without any weirdness? Just once?

Ehh, kinda. Apart from another 150 bytes wasted on unused structure members, this code is indeed more on the low end in terms of overall jank. It does become very obvious why dodging these missiles in the YuugenMagan, Mima, and Elis fights feels so awful though: An unfair 46×46 pixel hitbox around Reimu's center pixel, combined with the comeback of 📝 interlaced rendering, this time in every stage. ZUN probably did this because missiles are the only 16×16 sprite in TH01 that is blitted to unaligned X positions, which effectively ends up touching a 32×16 area of VRAM per sprite.
But even if we assume VRAM writes to be the bottleneck here, it would have been totally possible to render every missile in every frame at roughly the same amount of CPU time that the original game uses for interlaced rendering:

That's an optimization that would have significantly benefitted the game, in contrast to all of the fake ones introduced in later games. Then again, this optimization is actually something that the later games do, and it might have in fact been necessary to achieve their higher bullet counts without significant slowdown.

Unfortunately, it was only worth decompiling half of the missile code right now, thanks to gratuitous FPU usage in the other half, where 📝 double variables are compared to float literals. That one will have to wait 📝 until after SinGyoku.

After some effectively unused Mima sprite effect code that is so broken that it's impossible to make sense out of it, we get to the final feature I wanted to cover for all bosses in parallel before returning to Sariel: The separate sprite background storage for moving or animated boss sprites in the Mima, Elis, and Sariel fights. But, uh… why is this necessary to begin with? Doesn't TH01 already reserve the other VRAM page for backgrounds?
Well, these sprites are quite big, and ZUN didn't want to blit them from main memory on every frame. After all, TH01 and TH02 had a minimum required clock speed of 33 MHz, half of the speed required for the later three games. So, he simply blitted these boss sprites to both VRAM pages, leading the usual unblitting calls to only remove the other sprites on top of the boss. However, these bosses themselves want to move across the screen… and this makes it necessary to save the stage background behind them in some other way.

Enter .PTN, and its functions to capture a 16×16 or 32×32 square from VRAM into a sprite slot. No problem with that approach in theory, as the size of all these bigger sprites is a multiple of 32×32; splitting a larger sprite into these smaller 32×32 chunks makes the code look just a little bit clumsy (and, of course, slower).
But somewhere during the development of Mima's fight, ZUN apparently forgot that those sprite backgrounds existed. And once Mima's 🚫 casting sprite is blitted on top of her regular sprite, using just regular sprite transparency, she ends up with her infamous third arm:

TH01 Mima's third arm

Ironically, there's an unused code path in Mima's unblit function where ZUN assumes a height of 48 pixels for Mima's animation sprites rather than the actual 64. This leads to even clumsier .PTN function calls for the bottom 128×16 pixels… Failing to unblit the bottom 16 pixels would have also yielded that third arm, although it wouldn't have looked as natural. Still wouldn't say that it was intentional; maybe this casting sprite was just added pretty late in the game's development?

So, mission accomplished, Sariel unblocked… at 2¼ pushes. :thonk: That's quite some time left for some smaller stage initialization code, which bundles a bunch of random function calls in places where they logically really don't belong. The stage opening animation then adds a bunch of VRAM inter-page copies that are not only redundant but can't even be understood without knowing the hidden internal state of the last VRAM page accessed by previous ZUN code…
In better news though: Turbo C++ 4.0 really doesn't seem to have any complexity limit on inlining arithmetic expressions, as long as they only operate on compile-time constants. That's how we get macro-free, compile-time Shift-JIS to JIS X 0208 conversion of the individual code points in the 東方★靈異伝 string, in a compiler from 1994. As long as you don't store any intermediate results in variables, that is… :tannedcirno:

But wait, there's more! With still ¼ of a push left, I also went for the boss defeat animation, which includes the route selection after the SinGyoku fight.
As in all other instances, the 2× scaled font is accomplished by first rendering the text at regular 1× resolution to the other, invisible VRAM page, and then scaled from there to the visible one. However, the route selection is unique in that its scaled text is both drawn transparently on top of the stage background (not onto a black one), and can also change colors depending on the selection. It would have been no problem to unblit and reblit the text by rendering the 1× version to a position on the invisible VRAM page that isn't covered by the 2× version on the visible one, but ZUN (needlessly) clears the invisible page before rendering any text. :zunpet: Instead, he assigned a separate VRAM color for both the 魔界 and 地獄 options, and only changed the palette value for these colors to white or gray, depending on the correct selection. This is another one of the 📝 rare cases where TH01 demonstrates good use of PC-98 hardware, as the 魔界へ and 地獄へ strings don't need to be reblitted during the selection process, only the Orb "cursor" does.

Then, why does this still not count as good-code? When changing palette colors, you kinda need to be aware of everything else that can possibly be on screen, which colors are used there, and which aren't and can therefore be used for such an effect without affecting other sprites. In this case, well… hover over the image below, and notice how Reimu's hair and the bomb sprites in the HUD light up when Makai is selected:

Demonstration of palette changes in TH01's route selection

This push did end on a high note though, with the generic, non-SinGyoku version of the defeat animation being an easily parametrizable copy. And that's how you decompile another 2.58% of TH01 in just slightly over three pushes.

Now, we're not only ready to decompile Sariel, but also Kikuri, Elis, and SinGyoku without needing any more detours into non-boss code. Thanks to the current TH01 funding subscriptions, I can plan to cover most, if not all, of Sariel in a single push series, but the currently 3 pending pushes probably won't suffice for Sariel's 8.10% of all remaining code in TH01. We've got quite a lot of not specifically TH01-related funds in the backlog to pass the time though.

Due to recent developments, it actually makes quite a lot of sense to take a break from TH01: spaztron64 has managed what every Touhou download site so far has failed to do: Bundling all 5 game onto a single .HDI together with pre-configured PC-98 emulators and a nice boot menu, and hosting the resulting package on a proper website. While this first release is already quite good (and much better than my attempt from 2014), there is still a bit of room for improvement to be gained from specific ReC98 research. Next up, therefore:

📝 Posted:
🚚 Summary of:
P0160, P0161
e491cd7...42ba4a5, 42ba4a5...81dd96e
💰 Funded by:
Yanga, [Anonymous]
🏷 Tags:
rec98+ th01- gameplay+ resident+ bullet- boss+ mima-th01+ animation+ waste+ glitch+ tcc+

Nothing really noteworthy in TH01's stage timer code, just yet another HUD element that is needlessly drawn into VRAM. Sure, ZUN applies his custom boldfacing effect on top of the glyphs retrieved from font ROM, but he could have easily installed those modified glyphs as gaiji.
Well, OK, halfwidth gaiji aren't exactly well documented, and sometimes not even correctly emulated 📝 due to the same PC-98 hardware oddity I was researching last month. I've reserved two of the pending anonymous "anything" pushes for the conclusion of this research, just in case you were wondering why the outstanding workload is now lower after the two delivered here.

And since it doesn't seem to be clearly documented elsewhere: Every 2 ticks on the stage timer correspond to 4 frames.

So, TH01 rank pellet speed. The resident pellet speed value is a factor ranging from a minimum of -0.375 up to a maximum of 0.5 (pixels per frame), multiplied with the difficulty-adjusted base speed for each pellet and added on top of that same speed. This multiplier is modified

Apparently, ZUN noted that these deltas couldn't be losslessly stored in an IEEE 754 floating-point variable, and therefore didn't store the pellet speed factor exactly in a way that would correspond to its gameplay effect. Instead, it's stored similar to Q12.4 subpixels: as a simple integer, pre-multiplied by 40. This results in a raw range of -15 to 20, which is what the undecompiled ASM calls still use. When spawning a new pellet, its base speed is first multiplied by that factor, and then divided by 40 again. This is actually quite smart: The calculation doesn't need to be aware of either Q12.4 or the 40× format, as ((Q12.4 * factor×40) / factor×40) still comes out as a Q12.4 subpixel even if all numbers are integers. The only limiting issue here would be the potential overflow of the 16-bit multiplication at unadjusted base speeds of more than 50 pixels per frame, but that'd be seriously unplayable.
So yeah, pellet speed modifications are indeed gradual, and don't just fall into the coarse three "high, normal, and low" categories.

That's ⅝ of P0160 done, and the continue and pause menus would make good candidates to fill up the remaining ⅜… except that it seemed impossible to figure out the correct compiler options for this code?
The issues centered around the two effects of Turbo C++ 4.0J's -O switch:

  1. Optimizing jump instructions: merging duplicate successive jumps into a single one, and merging duplicated instructions at the end of conditional branches into a single place under a single branch, which the other branches then jump to
  2. Compressing ADD SP and POP CX stack-clearing instructions after multiple successive CALLs to __cdecl functions into a single ADD SP with the combined parameter stack size of all function calls

But how can the ASM for these functions exhibit #1 but not #2? How can it be seemingly optimized and unoptimized at the same time? The only option that gets somewhat close would be -O- -y, which emits line number information into the .OBJ files for debugging. This combination provides its own kind of #1, but these functions clearly need the real deal.

The research into this issue ended up consuming a full push on its own. In the end, this solution turned out to be completely unrelated to compiler options, and instead came from the effects of a compiler bug in a totally different place. Initializing a local structure instance or array like

const uint4_t flash_colors[3] = { 3, 4, 5 };

always emits the { 3, 4, 5 } array into the program's data segment, and then generates a call to the internal SCOPY@ function which copies this data array to the local variable on the stack. And as soon as this SCOPY@ call is emitted, the -O optimization #1 is disabled for the entire rest of the translation unit?!
So, any code segment with an SCOPY@ call followed by __cdecl functions must strictly be decompiled from top to bottom, mirroring the original layout of translation units. That means no TH01 continue and pause menus before we haven't decompiled the bomb animation, which contains such an SCOPY@ call. 😕
Luckily, TH01 is the only game where this bug leads to significant restrictions in decompilation order, as later games predominantly use the pascal calling convention, in which each function itself clears its stack as part of its RET instruction.

What now, then? With 51% of REIIDEN.EXE decompiled, we're slowly running out of small features that can be decompiled within ⅜ of a push. Good that I haven't been looking a lot into OP.EXE and FUUIN.EXE, which pretty much only got easy pieces of code left to do. Maybe I'll end up finishing their decompilations entirely within these smaller gaps?
I still ended up finding one more small piece in REIIDEN.EXE though: The particle system, seen in the Mima fight.

I like how everything about this animation is contained within a single function that is called once per frame, but ZUN could have really consolidated the spawning code for new particles a bit. In Mima's fight, particles are only spawned from the top and right edges of the screen, but the function in fact contains unused code for all other 7 possible directions, written in quite a bloated manner. This wouldn't feel quite as unused if ZUN had used an angle parameter instead… :thonk: Also, why unnecessarily waste another 40 bytes of the BSS segment?

But wait, what's going on with the very first spawned particle that just stops near the bottom edge of the screen in the video above? Well, even in such a simple and self-contained function, ZUN managed to include an off-by-one error. This one then results in an out-of-bounds array access on the 80th frame, where the code attempts to spawn a 41st particle. If the first particle was unlucky to be both slow enough and spawned away far enough from the bottom and right edges, the spawning code will then kill it off before its unblitting code gets to run, leaving its pixel on the screen until something else overlaps it and causes it to be unblitted.
Which, during regular gameplay, will quickly happen with the Orb, all the pellets flying around, and your own player movement. Also, the RNG can easily spawn this particle at a position and velocity that causes it to leave the screen more quickly. Kind of impressive how ZUN laid out the structure of arrays in a way that ensured practically no effect of this bug on the game; this glitch could have easily happened every 80 frames instead. He almost got close to all bugs canceling out each other here! :godzun:

Next up: The player control functions, including the second-biggest function in all of PC-98 Touhou.

📝 Posted:
🚚 Summary of:
P0099, P0100, P0101, P0102
1799d67...1b25830, 1b25830...ceb81db, ceb81db...c11a956, c11a956...b60f38d
💰 Funded by:
Ember2528, Yanga
🏷 Tags:
rec98+ th01- gameplay+ bullet- jank+ contribution-ideas+ bug+ boss+ elis+ kikuri+ sariel+ konngara+

Well, make that three days. Trying to figure out all the details behind the sprite flickering was absolutely dreadful…
It started out easy enough, though. Unsurprisingly, TH01 had a quite limited pellet system compared to TH04 and TH05:

As expected from TH01, the code comes with its fair share of smaller, insignificant ZUN bugs and oversights. As you would also expect though, the sprite flickering points to the biggest and most consequential flaw in all of this.

Apparently, it started with ZUN getting the impression that it's only possible to use the PC-98 EGC for fast blitting of all 4 bitplanes in one CPU instruction if you blit 16 horizontal pixels (= 2 bytes) at a time. Consequently, he only wrote one function for EGC-accelerated sprite unblitting, which can only operate on a "grid" of 16×1 tiles in VRAM. But wait, pellets are not only just 8×8, but can also be placed at any unaligned X position…

… yet the game still insists on using this 16-dot-aligned function to unblit pellets, forcing itself into using a super sloppy 16×8 rectangle for the job. 🤦 ZUN then tried to mitigate the resulting flickering in two hilarious ways that just make it worse:

  1. An… "interlaced rendering" mode? This one's activated for all Stage 15 and 20 fights, and separates pellets into two halves that are rendered on alternating frames. Collision detection with the Yin-Yang Orb and the player is only done for the visible half, but collision detection with player shots is still done for all pellets every frame, as are motion updates – so that pellets don't end up moving half as fast as they should.
    So yeah, your eyes weren't deceiving you. The game does effectively drop its perceived frame rate in the Elis, Kikuri, Sariel, and Konngara fights, and it does so deliberately.
  2. 📝 Just like player shots, pellets are also unblitted, moved, and rendered in a single function. Thanks to the 16×8 rectangle, there's now the (completely unnecessary) possibility of accidentally unblitting parts of a sprite that was previously drawn into the 8 pixels right of a pellet. And this is where ZUN went full :tannedcirno: and went "oh, I know, let's test the entire 16 pixels, and in case we got an entity there, we simply make the pellet invisible for this frame! Then we don't even have to unblit it later!" :zunpet:

    Except that this is only done for the first 3 elements of the player shot array…?! Which don't even necessarily have to contain the 3 shots fired last. It's not done for the player sprite, the Orb, or, heck, other pellets that come earlier in the pellet array. (At least we avoided going 𝑂(𝑛²) there?)

    Actually, and I'm only realizing this now as I type this blog post: This test is done even if the shots at those array elements aren't active. So, pellets tend to be made invisible based on comparisons with garbage data. :onricdennat:

    And then you notice that the player shot unblit​/​move​/​render function is actually only ever called from the pellet unblit​/​move​/​render function on the one global instance of the player shot manager class, after pellets were unblitted. So, we end up with a sequence of

    Pellet unblit → Pellet move → Shot unblit → Shot move → Shot render → Pellet render

    which means that we can't ever unblit a previously rendered shot with a pellet. Sure, as terrible as this one function call is from a software architecture perspective, it was enough to fix this issue. Yet we don't even get the intended positive effect, and walk away with pellets that are made temporarily invisible for no reason at all. So, uh, maybe it all just was an attempt at increasing the ramerate on lower spec PC-98 models?

Yup, that's it, we've found the most stupid piece of code in this game, period. It'll be hard to top this.

I'm confident that it's possible to turn TH01 into a well-written, fluid PC-98 game, with no flickering, and no perceived lag, once it's position-independent. With some more in-depth knowledge and documentation on the EGC (remember, there's still 📝 this one TH03 push waiting to be funded), you might even be able to continue using that piece of blitter hardware. And no, you certainly won't need ASM micro-optimizations – just a bit of knowledge about which optimizations Turbo C++ does on its own, and what you'd have to improve in your own code. It'd be very hard to write worse code than what you find in TH01 itself.

(Godbolt for Turbo C++ 4.0J when? Seriously though, that would 📝 also be a great project for outside contributors!)

Oh well. In contrast to TH04 and TH05, where 4 pushes only covered all the involved data types, they were enough to completely cover all of the pellet code in TH01. Everything's already decompiled, and we never have to look at it again. 😌 And with that, TH01 has also gone from by far the least RE'd to the most RE'd game within ReC98, in just half a year! 🎉
Still, that was enough TH01 game logic for a while. :tannedcirno: Next up: Making up for the delay with some more relaxing and easy pieces of TH01 code, that hopefully make just a bit more sense than all this garbage. More image formats, mainly.